From 312e6071d7eac58fe1b70297789fd8a9d563833b Mon Sep 17 00:00:00 2001
From: zzz Device : "+dev.getFriendlyName()+" - "+ dev.getDeviceType()+"
");
+ if("urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1".equals(serv.getServiceType())){
+ sb.append("WANCommonInterfaceConfig");
+ sb.append(" status: " + toString("GetCommonLinkProperties", "NewPhysicalLinkStatus", serv));
+ sb.append(" type: " + toString("GetCommonLinkProperties", "NewWANAccessType", serv));
+ sb.append(" upstream: " + toString("GetCommonLinkProperties", "NewLayer1UpstreamMaxBitRate", serv));
+ sb.append(" downstream: " + toString("GetCommonLinkProperties", "NewLayer1DownstreamMaxBitRate", serv) + "
");
+ }else if("urn:schemas-upnp-org:service:WANPPPConnection:1".equals(serv.getServiceType())){
+ sb.append("WANPPPConnection");
+ sb.append(" status: " + toString("GetStatusInfo", "NewConnectionStatus", serv));
+ sb.append(" type: " + toString("GetConnectionTypeInfo", "NewConnectionType", serv));
+ sb.append(" upstream: " + toString("GetLinkLayerMaxBitRates", "NewUpstreamMaxBitRate", serv));
+ sb.append(" downstream: " + toString("GetLinkLayerMaxBitRates", "NewDownstreamMaxBitRate", serv) + "
");
+ sb.append(" external IP: " + toString("GetExternalIPAddress", "NewExternalIPAddress", serv) + "
");
+ }else if("urn:schemas-upnp-org:service:Layer3Forwarding:1".equals(serv.getServiceType())){
+ sb.append("Layer3Forwarding");
+ sb.append("DefaultConnectionService: " + toString("GetDefaultConnectionService", "NewDefaultConnectionService", serv));
+ }else if(WAN_IP_CONNECTION.equals(serv.getServiceType())){
+ sb.append("WANIPConnection");
+ sb.append(" status: " + toString("GetStatusInfo", "NewConnectionStatus", serv));
+ sb.append(" type: " + toString("GetConnectionTypeInfo", "NewConnectionType", serv));
+ sb.append(" external IP: " + toString("GetExternalIPAddress", "NewExternalIPAddress", serv) + "
");
+ }else if("urn:schemas-upnp-org:service:WANEthernetLinkConfig:1".equals(serv.getServiceType())){
+ sb.append("WANEthernetLinkConfig");
+ sb.append(" status: " + toString("GetEthernetLinkStatus", "NewEthernetLinkStatus", serv) + "
");
+ }else
+ sb.append("~~~~~~~ "+serv.getServiceType());
+ listActions(serv, sb);
+ listStateTable(serv, sb);
+ sb.append("");
+ }
+ }
+
+ private void listSubDev(String prefix, Device dev, StringBuilder sb){
+ sb.append("
");
+ listSubServices(dev, sb);
+
+ DeviceList dl = dev.getDeviceList();
+ for(int j=0; j
There are following different + * kinds of parser depending on which features are set:
There are two key methods: next() and nextToken(). While next() provides + * access to high level parsing events, nextToken() allows access to lower + * level tokens. + * + *
The current event state of the parser + * can be determined by calling the + * getEventType() method. + * Initially, the parser is in the START_DOCUMENT + * state. + * + *
The method next() advances the parser to the + * next event. The int value returned from next determines the current parser + * state and is identical to the value returned from following calls to + * getEventType (). + * + *
Th following event types are seen by next()
after first next() or nextToken() (or any other next*() method) + * is called user application can obtain + * XML version, standalone and encoding from XML declaration + * in following ways:
+ * import java.io.IOException; + * import java.io.StringReader; + * + * import plugins.JabberLinker.org.xmlpull.v1.XmlPullParser; + * import plugins.JabberLinker.org.xmlpull.v1.XmlPullParserException.html; + * import plugins.JabberLinker.org.xmlpull.v1.XmlPullParserFactory; + * + * public class SimpleXmlPullApp + * { + * + * public static void main (String args[]) + * throws XmlPullParserException, IOException + * { + * XmlPullParserFactory factory = XmlPullParserFactory.newInstance(); + * factory.setNamespaceAware(true); + * XmlPullParser xpp = factory.newPullParser(); + * + * xpp.setInput( new StringReader ( "<foo>Hello World!</foo>" ) ); + * int eventType = xpp.getEventType(); + * while (eventType != XmlPullParser.END_DOCUMENT) { + * if(eventType == XmlPullParser.START_DOCUMENT) { + * System.out.println("Start document"); + * } else if(eventType == XmlPullParser.END_DOCUMENT) { + * System.out.println("End document"); + * } else if(eventType == XmlPullParser.START_TAG) { + * System.out.println("Start tag "+xpp.getName()); + * } else if(eventType == XmlPullParser.END_TAG) { + * System.out.println("End tag "+xpp.getName()); + * } else if(eventType == XmlPullParser.TEXT) { + * System.out.println("Text "+xpp.getText()); + * } + * eventType = xpp.next(); + * } + * } + * } + *+ * + *
The above example will generate the following output: + *
+ * Start document + * Start tag foo + * Text Hello World! + * End tag foo + *+ * + *
For more details on API usage, please refer to the + * quick Introduction available at http://www.xmlpull.org + * + * @see XmlPullParserFactory + * @see #defineEntityReplacementText + * @see #getName + * @see #getNamespace + * @see #getText + * @see #next + * @see #nextToken + * @see #setInput + * @see #FEATURE_PROCESS_DOCDECL + * @see #FEATURE_VALIDATION + * @see #START_DOCUMENT + * @see #START_TAG + * @see #TEXT + * @see #END_TAG + * @see #END_DOCUMENT + * + * @author Stefan Haustein + * @author Aleksander Slominski + */ + +public interface XmlPullParser { + + /** This constant represents the default namespace (empty string "") */ + String NO_NAMESPACE = ""; + + // ---------------------------------------------------------------------------- + // EVENT TYPES as reported by next() + + /** + * Signalize that parser is at the very beginning of the document + * and nothing was read yet. + * This event type can only be observed by calling getEvent() + * before the first call to next(), nextToken, or nextTag()). + * + * @see #next + * @see #nextToken + */ + int START_DOCUMENT = 0; + + /** + * Logical end of the xml document. Returned from getEventType, next() + * and nextToken() + * when the end of the input document has been reached. + *
NOTE: calling again + * next() or nextToken() + * will result in exception being thrown. + * + * @see #next + * @see #nextToken + */ + int END_DOCUMENT = 1; + + /** + * Returned from getEventType(), + * next(), nextToken() when + * a start tag was read. + * The name of start tag is available from getName(), its namespace and prefix are + * available from getNamespace() and getPrefix() + * if namespaces are enabled. + * See getAttribute* methods to retrieve element attributes. + * See getNamespace* methods to retrieve newly declared namespaces. + * + * @see #next + * @see #nextToken + * @see #getName + * @see #getPrefix + * @see #getNamespace + * @see #getAttributeCount + * @see #getDepth + * @see #getNamespaceCount + * @see #getNamespace + * @see #FEATURE_PROCESS_NAMESPACES + */ + int START_TAG = 2; + + /** + * Returned from getEventType(), next(), or + * nextToken() when an end tag was read. + * The name of start tag is available from getName(), its + * namespace and prefix are + * available from getNamespace() and getPrefix(). + * + * @see #next + * @see #nextToken + * @see #getName + * @see #getPrefix + * @see #getNamespace + * @see #FEATURE_PROCESS_NAMESPACES + */ + int END_TAG = 3; + + + /** + * Character data was read and will is available by calling getText(). + *
Please note: next() will + * accumulate multiple + * events into one TEXT event, skipping IGNORABLE_WHITESPACE, + * PROCESSING_INSTRUCTION and COMMENT events, + * In contrast, nextToken() will stop reading + * text when any other event is observed. + * Also, when the state was reached by calling next(), the text value will + * be normalized, whereas getText() will + * return unnormalized content in the case of nextToken(). This allows + * an exact roundtrip without chnanging line ends when examining low + * level events, whereas for high level applications the text is + * normalized apropriately. + * + * @see #next + * @see #nextToken + * @see #getText + */ + int TEXT = 4; + + // ---------------------------------------------------------------------------- + // additional events exposed by lower level nextToken() + + /** + * A CDATA sections was just read; + * this token is available only from calls to nextToken(). + * A call to next() will accumulate various text events into a single event + * of type TEXT. The text contained in the CDATA section is available + * by callling getText(). + * + * @see #nextToken + * @see #getText + */ + int CDSECT = 5; + + /** + * An entity reference was just read; + * this token is available from nextToken() + * only. The entity name is available by calling getName(). If available, + * the replacement text can be obtained by calling getTextt(); otherwise, + * the user is responsibile for resolving the entity reference. + * This event type is never returned from next(); next() will + * accumulate the replacement text and other text + * events to a single TEXT event. + * + * @see #nextToken + * @see #getText + */ + int ENTITY_REF = 6; + + /** + * Ignorable whitespace was just read. + * This token is available only from nextToken()). + * For non-validating + * parsers, this event is only reported by nextToken() when outside + * the root element. + * Validating parsers may be able to detect ignorable whitespace at + * other locations. + * The ignorable whitespace string is available by calling getText() + * + *
NOTE: this is different from calling the + * isWhitespace() method, since text content + * may be whitespace but not ignorable. + * + * Ignorable whitespace is skipped by next() automatically; this event + * type is never returned from next(). + * + * @see #nextToken + * @see #getText + */ + int IGNORABLE_WHITESPACE = 7; + + /** + * An XML processing instruction declaration was just read. This + * event type is available only via nextToken(). + * getText() will return text that is inside the processing instruction. + * Calls to next() will skip processing instructions automatically. + * @see #nextToken + * @see #getText + */ + int PROCESSING_INSTRUCTION = 8; + + /** + * An XML comment was just read. This event type is this token is + * available via nextToken() only; + * calls to next() will skip comments automatically. + * The content of the comment can be accessed using the getText() + * method. + * + * @see #nextToken + * @see #getText + */ + int COMMENT = 9; + + /** + * An XML document type declaration was just read. This token is + * available from nextToken() only. + * The unparsed text inside the doctype is available via + * the getText() method. + * + * @see #nextToken + * @see #getText + */ + int DOCDECL = 10; + + /** + * This array can be used to convert the event type integer constants + * such as START_TAG or TEXT to + * to a string. For example, the value of TYPES[START_TAG] is + * the string "START_TAG". + * + * This array is intended for diagnostic output only. Relying + * on the contents of the array may be dangerous since malicous + * applications may alter the array, although it is final, due + * to limitations of the Java language. + */ + String [] TYPES = { + "START_DOCUMENT", + "END_DOCUMENT", + "START_TAG", + "END_TAG", + "TEXT", + "CDSECT", + "ENTITY_REF", + "IGNORABLE_WHITESPACE", + "PROCESSING_INSTRUCTION", + "COMMENT", + "DOCDECL" + }; + + + // ---------------------------------------------------------------------------- + // namespace related features + + /** + * This feature determines whether the parser processes + * namespaces. As for all features, the default value is false. + *
NOTE: The value can not be changed during + * parsing an must be set before parsing. + * + * @see #getFeature + * @see #setFeature + */ + String FEATURE_PROCESS_NAMESPACES = + "http://xmlpull.org/v1/doc/features.html#process-namespaces"; + + /** + * This feature determines whether namespace attributes are + * exposed via the attribute access methods. Like all features, + * the default value is false. This feature cannot be changed + * during parsing. + * + * @see #getFeature + * @see #setFeature + */ + String FEATURE_REPORT_NAMESPACE_ATTRIBUTES = + "http://xmlpull.org/v1/doc/features.html#report-namespace-prefixes"; + + /** + * This feature determines whether the document declaration + * is processed. If set to false, + * the DOCDECL event type is reported by nextToken() + * and ignored by next(). + * + * If this featue is activated, then the document declaration + * must be processed by the parser. + * + *
Please note: If the document type declaration + * was ignored, entity references may cause exceptions + * later in the parsing process. + * The default value of this feature is false. It cannot be changed + * during parsing. + * + * @see #getFeature + * @see #setFeature + */ + String FEATURE_PROCESS_DOCDECL = + "http://xmlpull.org/v1/doc/features.html#process-docdecl"; + + /** + * If this feature is activated, all validation errors as + * defined in the XML 1.0 sepcification are reported. + * This implies that FEATURE_PROCESS_DOCDECL is true and both, the + * internal and external document type declaration will be processed. + *
Please Note: This feature can not be changed + * during parsing. The default value is false. + * + * @see #getFeature + * @see #setFeature + */ + String FEATURE_VALIDATION = + "http://xmlpull.org/v1/doc/features.html#validation"; + + /** + * Use this call to change the general behaviour of the parser, + * such as namespace processing or doctype declaration handling. + * This method must be called before the first call to next or + * nextToken. Otherwise, an exception is thrown. + *
Example: call setFeature(FEATURE_PROCESS_NAMESPACES, true) in order + * to switch on namespace processing. The initial settings correspond + * to the properties requested from the XML Pull Parser factory. + * If none were requested, all feautures are deactivated by default. + * + * @exception XmlPullParserException If the feature is not supported or can not be set + * @exception IllegalArgumentException If string with the feature name is null + */ + void setFeature(String name, + boolean state) throws XmlPullParserException; + + /** + * Returns the current value of the given feature. + *
Please note: unknown features are + * always returned as false. + * + * @param name The name of feature to be retrieved. + * @return The value of the feature. + * @exception IllegalArgumentException if string the feature name is null + */ + + boolean getFeature(String name); + + /** + * Set the value of a property. + * + * The property name is any fully-qualified URI. + * + * @exception XmlPullParserException If the property is not supported or can not be set + * @exception IllegalArgumentException If string with the property name is null + */ + void setProperty(String name, + Object value) throws XmlPullParserException; + + /** + * Look up the value of a property. + * + * The property name is any fully-qualified URI. + *
NOTE: unknown properties are always + * returned as null. + * + * @param name The name of property to be retrieved. + * @return The value of named property. + */ + Object getProperty(String name); + + + /** + * Set the input source for parser to the given reader and + * resets the parser. The event type is set to the initial value + * START_DOCUMENT. + * Setting the reader to null will just stop parsing and + * reset parser state, + * allowing the parser to free internal resources + * such as parsing buffers. + */ + void setInput(Reader in) throws XmlPullParserException; + + + /** + * Sets the input stream the parser is going to process. + * This call resets the parser state and sets the event type + * to the initial value START_DOCUMENT. + * + *
NOTE: If an input encoding string is passed, + * it MUST be used. Otherwise, + * if inputEncoding is null, the parser SHOULD try to determine + * input encoding following XML 1.0 specification (see below). + * If encoding detection is supported then following feature + * http://xmlpull.org/v1/doc/features.html#detect-encoding + * MUST be true amd otherwise it must be false + * + * @param inputStream contains a raw byte input stream of possibly + * unknown encoding (when inputEncoding is null). + * + * @param inputEncoding if not null it MUST be used as encoding for inputStream + */ + void setInput(InputStream inputStream, String inputEncoding) + throws XmlPullParserException; + + /** + * Returns the input encoding if known, null otherwise. + * If setInput(InputStream, inputEncoding) was called with an inputEncoding + * value other than null, this value must be returned + * from this method. Otherwise, if inputEncoding is null and + * the parser suppports the encoding detection feature + * (http://xmlpull.org/v1/doc/features.html#detect-encoding), + * it must return the detected encoding. + * If setInput(Reader) was called, null is returned. + * After first call to next if XML declaration was present this method + * will return encoding declared. + */ + String getInputEncoding(); + + /** + * Set new value for entity replacement text as defined in + * XML 1.0 Section 4.5 + * Construction of Internal Entity Replacement Text. + * If FEATURE_PROCESS_DOCDECL or FEATURE_VALIDATION are set, calling this + * function will result in an exception -- when processing of DOCDECL is + * enabled, there is no need to the entity replacement text manually. + * + *
The motivation for this function is to allow very small + * implementations of XMLPULL that will work in J2ME environments. + * Though these implementations may not be able to process the document type + * declaration, they still can work with known DTDs by using this function. + * + *
Please notes: The given value is used literally as replacement text + * and it corresponds to declaring entity in DTD that has all special characters + * escaped: left angle bracket is replaced with <, ampersnad with & + * and so on. + * + *
Note: The given value is the literal replacement text and must not + * contain any other entity reference (if it contains any entity reference + * there will be no further replacement). + * + *
Note: The list of pre-defined entity names will + * always contain standard XML entities such as + * amp (&), lt (<), gt (>), quot ("), and apos ('). + * Those cannot be redefined by this method! + * + * @see #setInput + * @see #FEATURE_PROCESS_DOCDECL + * @see #FEATURE_VALIDATION + */ + void defineEntityReplacementText( String entityName, + String replacementText ) throws XmlPullParserException; + + /** + * Returns the numbers of elements in the namespace stack for the given + * depth. + * If namespaces are not enabled, 0 is returned. + * + *
NOTE: when parser is on END_TAG then it is allowed to call + * this function with getDepth()+1 argument to retrieve position of namespace + * prefixes and URIs that were declared on corresponding START_TAG. + *
NOTE: to retrieve lsit of namespaces declared in current element:
+ * XmlPullParser pp = ... + * int nsStart = pp.getNamespaceCount(pp.getDepth()-1); + * int nsEnd = pp.getNamespaceCount(pp.getDepth()); + * for (int i = nsStart; i < nsEnd; i++) { + * String prefix = pp.getNamespacePrefix(i); + * String ns = pp.getNamespaceUri(i); + * // ... + * } + *+ * + * @see #getNamespacePrefix + * @see #getNamespaceUri + * @see #getNamespace() + * @see #getNamespace(String) + */ + int getNamespaceCount(int depth) throws XmlPullParserException; + + /** + * Returns the namespace prefixe for the given position + * in the namespace stack. + * Default namespace declaration (xmlns='...') will have null as prefix. + * If the given index is out of range, an exception is thrown. + *
Please note: when the parser is on an END_TAG, + * namespace prefixes that were declared + * in the corresponding START_TAG are still accessible + * although they are no longer in scope. + */ + String getNamespacePrefix(int pos) throws XmlPullParserException; + + /** + * Returns the namespace URI for the given position in the + * namespace stack + * If the position is out of range, an exception is thrown. + *
NOTE: when parser is on END_TAG then namespace prefixes that were declared + * in corresponding START_TAG are still accessible even though they are not in scope + */ + String getNamespaceUri(int pos) throws XmlPullParserException; + + /** + * Returns the URI corresponding to the given prefix, + * depending on current state of the parser. + * + *
If the prefix was not declared in the current scope, + * null is returned. The default namespace is included + * in the namespace table and is available via + * getNamespace (null). + * + *
This method is a convenience method for + * + *
+ * for (int i = getNamespaceCount(getDepth ())-1; i >= 0; i--) { + * if (getNamespacePrefix(i).equals( prefix )) { + * return getNamespaceUri(i); + * } + * } + * return null; + *+ * + *
Please note: parser implementations + * may provide more efifcient lookup, e.g. using a Hashtable. + * The 'xml' prefix is bound to "http://www.w3.org/XML/1998/namespace", as + * defined in the + * Namespaces in XML + * specification. Analogous, the 'xmlns' prefix is resolved to + * http://www.w3.org/2000/xmlns/ + * + * @see #getNamespaceCount + * @see #getNamespacePrefix + * @see #getNamespaceUri + */ + String getNamespace (String prefix); + + + // -------------------------------------------------------------------------- + // miscellaneous reporting methods + + /** + * Returns the current depth of the element. + * Outside the root element, the depth is 0. The + * depth is incremented by 1 when a start tag is reached. + * The depth is decremented AFTER the end tag + * event was observed. + * + *
+ * <!-- outside --> 0 + * <root> 1 + * sometext 1 + * <foobar> 2 + * </foobar> 2 + * </root> 1 + * <!-- outside --> 0 + *+ */ + int getDepth(); + + /** + * Returns a short text describing the current parser state, including + * the position, a + * description of the current event and the data source if known. + * This method is especially useful to provide meaningful + * error messages and for debugging purposes. + */ + String getPositionDescription (); + + + /** + * Returns the current line number, starting from 1. + * When the parser does not know the current line number + * or can not determine it, -1 is returned (e.g. for WBXML). + * + * @return current line number or -1 if unknown. + */ + int getLineNumber(); + + /** + * Returns the current column number, starting from 0. + * When the parser does not know the current column number + * or can not determine it, -1 is returned (e.g. for WBXML). + * + * @return current column number or -1 if unknown. + */ + int getColumnNumber(); + + + // -------------------------------------------------------------------------- + // TEXT related methods + + /** + * Checks whether the current TEXT event contains only whitespace + * characters. + * For IGNORABLE_WHITESPACE, this is always true. + * For TEXT and CDSECT, false is returned when the current event text + * contains at least one non-white space character. For any other + * event type an exception is thrown. + * + *
Please note: non-validating parsers are not + * able to distinguish whitespace and ignorable whitespace, + * except from whitespace outside the root element. Ignorable + * whitespace is reported as separate event, which is exposed + * via nextToken only. + * + */ + boolean isWhitespace() throws XmlPullParserException; + + /** + * Returns the text content of the current event as String. + * The value returned depends on current event type, + * for example for TEXT event it is element content + * (this is typical case when next() is used). + * + * See description of nextToken() for detailed description of + * possible returned values for different types of events. + * + *
NOTE: in case of ENTITY_REF, this method returns + * the entity replacement text (or null if not available). This is + * the only case where + * getText() and getTextCharacters() return different values. + * + * @see #getEventType + * @see #next + * @see #nextToken + */ + String getText (); + + + /** + * Returns the buffer that contains the text of the current event, + * as well as the start offset and length relevant for the current + * event. See getText(), next() and nextToken() for description of possible returned values. + * + *
Please note: this buffer must not + * be modified and its content MAY change after a call to + * next() or nextToken(). This method will always return the + * same value as getText(), except for ENTITY_REF. In the case + * of ENTITY ref, getText() returns the replacement text and + * this method returns the actual input buffer containing the + * entity name. + * If getText() returns null, this method returns null as well and + * the values returned in the holder array MUST be -1 (both start + * and length). + * + * @see #getText + * @see #next + * @see #nextToken + * + * @param holderForStartAndLength Must hold an 2-element int array + * into which the start offset and length values will be written. + * @return char buffer that contains the text of the current event + * (null if the current event has no text associated). + */ + char[] getTextCharacters(int [] holderForStartAndLength); + + // -------------------------------------------------------------------------- + // START_TAG / END_TAG shared methods + + /** + * Returns the namespace URI of the current element. + * The default namespace is represented + * as empty string. + * If namespaces are not enabled, an empty String ("") is always returned. + * The current event must be START_TAG or END_TAG; otherwise, + * null is returned. + */ + String getNamespace (); + + /** + * For START_TAG or END_TAG events, the (local) name of the current + * element is returned when namespaces are enabled. When namespace + * processing is disabled, the raw name is returned. + * For ENTITY_REF events, the entity name is returned. + * If the current event is not START_TAG, END_TAG, or ENTITY_REF, + * null is returned. + *
Please note: To reconstruct the raw element name + * when namespaces are enabled and the prefix is not null, + * you will need to add the prefix and a colon to localName.. + * + */ + String getName(); + + /** + * Returns the prefix of the current element. + * If the element is in the default namespace (has no prefix), + * null is returned. + * If namespaces are not enabled, or the current event + * is not START_TAG or END_TAG, null is returned. + */ + String getPrefix(); + + /** + * Returns true if the current event is START_TAG and the tag + * is degenerated + * (e.g. <foobar/>). + *
NOTE: if the parser is not on START_TAG, an exception + * will be thrown. + */ + boolean isEmptyElementTag() throws XmlPullParserException; + + // -------------------------------------------------------------------------- + // START_TAG Attributes retrieval methods + + /** + * Returns the number of attributes of the current start tag, or + * -1 if the current event type is not START_TAG + * + * @see #getAttributeNamespace + * @see #getAttributeName + * @see #getAttributePrefix + * @see #getAttributeValue + */ + int getAttributeCount(); + + /** + * Returns the namespace URI of the attribute + * with the given index (starts from 0). + * Returns an empty string ("") if namespaces are not enabled + * or the attribute has no namespace. + * Throws an IndexOutOfBoundsException if the index is out of range + * or the current event type is not START_TAG. + * + *
NOTE: if FEATURE_REPORT_NAMESPACE_ATTRIBUTES is set + * then namespace attributes (xmlns:ns='...') must be reported + * with namespace + * http://www.w3.org/2000/xmlns/ + * (visit this URL for description!). + * The default namespace attribute (xmlns="...") will be reported with empty namespace. + *
NOTE:The xml prefix is bound as defined in + * Namespaces in XML + * specification to "http://www.w3.org/XML/1998/namespace". + * + * @param zero based index of attribute + * @return attribute namespace, + * empty string ("") is returned if namesapces processing is not enabled or + * namespaces processing is enabled but attribute has no namespace (it has no prefix). + */ + String getAttributeNamespace (int index); + + /** + * Returns the local name of the specified attribute + * if namespaces are enabled or just attribute name if namespaces are disabled. + * Throws an IndexOutOfBoundsException if the index is out of range + * or current event type is not START_TAG. + * + * @param zero based index of attribute + * @return attribute name (null is never returned) + */ + String getAttributeName (int index); + + /** + * Returns the prefix of the specified attribute + * Returns null if the element has no prefix. + * If namespaces are disabled it will always return null. + * Throws an IndexOutOfBoundsException if the index is out of range + * or current event type is not START_TAG. + * + * @param zero based index of attribute + * @return attribute prefix or null if namespaces processing is not enabled. + */ + String getAttributePrefix(int index); + + /** + * Returns the type of the specified attribute + * If parser is non-validating it MUST return CDATA. + * + * @param zero based index of attribute + * @return attribute type (null is never returned) + */ + String getAttributeType(int index); + + /** + * Returns if the specified attribute was not in input was declared in XML. + * If parser is non-validating it MUST always return false. + * This information is part of XML infoset: + * + * @param zero based index of attribute + * @return false if attribute was in input + */ + boolean isAttributeDefault(int index); + + /** + * Returns the given attributes value. + * Throws an IndexOutOfBoundsException if the index is out of range + * or current event type is not START_TAG. + * + *
NOTE: attribute value must be normalized + * (including entity replacement text if PROCESS_DOCDECL is false) as described in + * XML 1.0 section + * 3.3.3 Attribute-Value Normalization + * + * @see #defineEntityReplacementText + * + * @param zero based index of attribute + * @return value of attribute (null is never returned) + */ + String getAttributeValue(int index); + + /** + * Returns the attributes value identified by namespace URI and namespace localName. + * If namespaces are disabled namespace must be null. + * If current event type is not START_TAG then IndexOutOfBoundsException will be thrown. + * + *
NOTE: attribute value must be normalized + * (including entity replacement text if PROCESS_DOCDECL is false) as described in + * XML 1.0 section + * 3.3.3 Attribute-Value Normalization + * + * @see #defineEntityReplacementText + * + * @param namespace Namespace of the attribute if namespaces are enabled otherwise must be null + * @param name If namespaces enabled local name of attribute otherwise just attribute name + * @return value of attribute or null if attribute with given name does not exist + */ + String getAttributeValue(String namespace, + String name); + + // -------------------------------------------------------------------------- + // actual parsing methods + + /** + * Returns the type of the current event (START_TAG, END_TAG, TEXT, etc.) + * + * @see #next() + * @see #nextToken() + */ + int getEventType() + throws XmlPullParserException; + + /** + * Get next parsing event - element content wil be coalesced and only one + * TEXT event must be returned for whole element content + * (comments and processing instructions will be ignored and emtity references + * must be expanded or exception mus be thrown if entity reerence can not be exapnded). + * If element content is empty (content is "") then no TEXT event will be reported. + * + *
NOTE: empty element (such as <tag/>) will be reported + * with two separate events: START_TAG, END_TAG - it must be so to preserve + * parsing equivalency of empty element to <tag></tag>. + * (see isEmptyElementTag ()) + * + * @see #isEmptyElementTag + * @see #START_TAG + * @see #TEXT + * @see #END_TAG + * @see #END_DOCUMENT + */ + + int next() + throws XmlPullParserException, IOException; + + + /** + * This method works similarly to next() but will expose + * additional event types (COMMENT, CDSECT, DOCDECL, ENTITY_REF, PROCESSING_INSTRUCTION, or + * IGNORABLE_WHITESPACE) if they are available in input. + * + *
If special feature + * FEATURE_XML_ROUNDTRIP + * (identified by URI: http://xmlpull.org/v1/doc/features.html#xml-roundtrip) + * is enabled it is possible to do XML document round trip ie. reproduce + * exectly on output the XML input using getText(): + * returned content is always unnormalized (exactly as in input). + * Otherwise returned content is end-of-line normalized as described + * XML 1.0 End-of-Line Handling + * and. Also when this feature is enabled exact content of START_TAG, END_TAG, + * DOCDECL and PROCESSING_INSTRUCTION is available. + * + *
Here is the list of tokens that can be returned from nextToken() + * and what getText() and getTextCharacters() returns:
+ * " titlepage SYSTEM "http://www.foo.bar/dtds/typo.dtd" + * [<!ENTITY % active.links "INCLUDE">]"+ *
for input document that contained:
+ * <!DOCTYPE titlepage SYSTEM "http://www.foo.bar/dtds/typo.dtd" + * [<!ENTITY % active.links "INCLUDE">]>+ * otherwise if FEATURE_XML_ROUNDTRIP is false and PROCESS_DOCDECL is true + * then what is returned is undefined (it may be even null) + *
NOTE: there is no gurantee that there will only one TEXT or + * IGNORABLE_WHITESPACE event from nextToken() as parser may chose to deliver element content in + * multiple tokens (dividing element content into chunks) + * + *
NOTE: whether returned text of token is end-of-line normalized + * is depending on FEATURE_XML_ROUNDTRIP. + * + *
NOTE: XMLDecl (<?xml ...?>) is not reported but its content + * is available through optional properties (see class description above). + * + * @see #next + * @see #START_TAG + * @see #TEXT + * @see #END_TAG + * @see #END_DOCUMENT + * @see #COMMENT + * @see #DOCDECL + * @see #PROCESSING_INSTRUCTION + * @see #ENTITY_REF + * @see #IGNORABLE_WHITESPACE + */ + int nextToken() + throws XmlPullParserException, IOException; + + //----------------------------------------------------------------------------- + // utility methods to mak XML parsing easier ... + + /** + * Test if the current event is of the given type and if the + * namespace and name do match. null will match any namespace + * and any name. If the test is not passed, an exception is + * thrown. The exception text indicates the parser position, + * the expected event and the current event that is not meeting the + * requirement. + * + *
Essentially it does this + *
+ * if (type != getEventType() + * || (namespace != null && !namespace.equals( getNamespace () ) ) + * || (name != null && !name.equals( getName() ) ) ) + * throw new XmlPullParserException( "expected "+ TYPES[ type ]+getPositionDescription()); + *+ */ + void require(int type, String namespace, String name) + throws XmlPullParserException, IOException; + + /** + * If current event is START_TAG then if next element is TEXT then element content is returned + * or if next event is END_TAG then empty string is returned, otherwise exception is thrown. + * After calling this function successfully parser will be positioned on END_TAG. + * + *
The motivation for this function is to allow to parse consistently both + * empty elements and elements that has non empty content, for example for input:
+ * p.nextTag() + * p.requireEvent(p.START_TAG, "", "tag"); + * String content = p.nextText(); + * p.requireEvent(p.END_TAG, "", "tag"); + *+ * This function together with nextTag make it very easy to parse XML that has + * no mixed content. + * + * + *
Essentially it does this + *
+ * if(getEventType() != START_TAG) { + * throw new XmlPullParserException( + * "parser must be on START_TAG to read next text", this, null); + * } + * int eventType = next(); + * if(eventType == TEXT) { + * String result = getText(); + * eventType = next(); + * if(eventType != END_TAG) { + * throw new XmlPullParserException( + * "event TEXT it must be immediately followed by END_TAG", this, null); + * } + * return result; + * } else if(eventType == END_TAG) { + * return ""; + * } else { + * throw new XmlPullParserException( + * "parser must be on START_TAG or TEXT to read text", this, null); + * } + *+ */ + String nextText() throws XmlPullParserException, IOException; + + /** + * Call next() and return event if it is START_TAG or END_TAG + * otherwise throw an exception. + * It will skip whitespace TEXT before actual tag if any. + * + *
essentially it does this + *
+ * int eventType = next(); + * if(eventType == TEXT && isWhitespace()) { // skip whitespace + * eventType = next(); + * } + * if (eventType != START_TAG && eventType != END_TAG) { + * throw new XmlPullParserException("expected start or end tag", this, null); + * } + * return eventType; + *+ */ + int nextTag() throws XmlPullParserException, IOException; + +} + diff --git a/router/java/src/org/xmlpull/v1/XmlPullParserException.java b/router/java/src/org/xmlpull/v1/XmlPullParserException.java new file mode 100644 index 000000000..0faba7e20 --- /dev/null +++ b/router/java/src/org/xmlpull/v1/XmlPullParserException.java @@ -0,0 +1,80 @@ +/* -*- c-basic-offset: 4; indent-tabs-mode: nil; -*- //------100-columns-wide------>|*/ +// for license please see accompanying LICENSE.txt file (available also at http://www.xmlpull.org/) + +package org.xmlpull.v1; + +/** + * This exception is thrown to signal XML Pull Parser related faults. + * + * @author Aleksander Slominski + */ +public class XmlPullParserException extends Exception { + /** + * + */ + private static final long serialVersionUID = 1L; + protected Throwable detail; + protected int row = -1; + protected int column = -1; + + /* public XmlPullParserException() { + }*/ + + public XmlPullParserException(String s) { + super(s); + } + + /* + public XmlPullParserException(String s, Throwable thrwble) { + super(s); + this.detail = thrwble; + } + + public XmlPullParserException(String s, int row, int column) { + super(s); + this.row = row; + this.column = column; + } + */ + + public XmlPullParserException(String msg, XmlPullParser parser, Throwable chain) { + super ((msg == null ? "" : msg+" ") + + (parser == null ? "" : "(position:"+parser.getPositionDescription()+") ") + + (chain == null ? "" : "caused by: "+chain)); + + if (parser != null) { + this.row = parser.getLineNumber(); + this.column = parser.getColumnNumber(); + } + this.detail = chain; + } + + public Throwable getDetail() { return detail; } + // public void setDetail(Throwable cause) { this.detail = cause; } + public int getLineNumber() { return row; } + public int getColumnNumber() { return column; } + + /* + public String getMessage() { + if(detail == null) + return super.getMessage(); + else + return super.getMessage() + "; nested exception is: \n\t" + + detail.getMessage(); + } + */ + + //NOTE: code that prints this and detail is difficult in J2ME + public void printStackTrace() { + if (detail == null) { + super.printStackTrace(); + } else { + synchronized(System.err) { + System.err.println(super.getMessage() + "; nested exception is:"); + detail.printStackTrace(); + } + } + } + +} + diff --git a/router/java/src/org/xmlpull/v1/XmlPullParserFactory.java b/router/java/src/org/xmlpull/v1/XmlPullParserFactory.java new file mode 100644 index 000000000..af6c27adb --- /dev/null +++ b/router/java/src/org/xmlpull/v1/XmlPullParserFactory.java @@ -0,0 +1,356 @@ +/* -*- c-basic-offset: 4; indent-tabs-mode: nil; -*- //------100-columns-wide------>|*/ +// for license please see accompanying LICENSE.txt file (available also at http://www.xmlpull.org/) + +package org.xmlpull.v1; + +import java.io.InputStream; +import java.util.Enumeration; +import java.util.Hashtable; +import java.util.Vector; + +/** + * This class is used to create implementations of XML Pull Parser defined in XMPULL V1 API. + * The name of actual factory class will be determined based on several parameters. + * It works similar to JAXP but tailored to work in J2ME environments + * (no access to system properties or file system) so name of parser class factory to use + * and its class used for loading (no class loader - on J2ME no access to context class loaders) + * must be passed explicitly. If no name of parser factory was passed (or is null) + * it will try to find name by searching in CLASSPATH for + * META-INF/services/plugins.JabberLinker.org.xmlpull.v1.XmlPullParserFactory resource that should contain + * a comma separated list of class names of factories or parsers to try (in order from + * left to the right). If none found, it will throw an exception. + * + *
newInstance(property, classLoaderCtx)
+ * where first argument is
+ * System.getProperty(XmlPullParserFactory.PROPERTY_NAME)
+ * and second is Thread.getContextClassLoader().getClass()
.
+ *
+ * @see XmlPullParser
+ *
+ * @author Aleksander Slominski
+ * @author Stefan Haustein
+ */
+
+public class XmlPullParserFactory {
+ /** used as default class to server as context class in newInstance() */
+ final static Class referenceContextClass;
+
+ static {
+ XmlPullParserFactory f = new XmlPullParserFactory();
+ referenceContextClass = f.getClass();
+ }
+
+ /** Name of the system or midlet property that should be used for
+ a system property containing a comma separated list of factory
+ or parser class names (value:
+ plugins.JabberLinker.org.xmlpull.v1.XmlPullParserFactory). */
+
+
+ public static final String PROPERTY_NAME =
+ "plugins.JabberLinker.org.xmlpull.v1.XmlPullParserFactory";
+
+ private static final String RESOURCE_NAME =
+ "/META-INF/services/" + PROPERTY_NAME;
+
+
+ // public static final String DEFAULT_PROPERTY =
+ // "plugins.JabberLinker.org.xmlpull.xpp3.XmlPullParser,org.kxml2.io.KXmlParser";
+
+
+ protected Vector parserClasses;
+ protected String classNamesLocation;
+
+ protected Vector serializerClasses;
+
+
+ // features are kept there
+ protected Hashtable features = new Hashtable();
+
+
+ /**
+ * Protected constructor to be called by factory implementations.
+ */
+
+ protected XmlPullParserFactory() {
+ }
+
+
+
+ /**
+ * Set the features to be set when XML Pull Parser is created by this factory.
+ * NOTE: factory features are not used for XML Serializer. + * + * @param name string with URI identifying feature + * @param state if true feature will be set; if false will be ignored + */ + + public void setFeature(String name, + boolean state) throws XmlPullParserException { + + features.put(name, new Boolean(state)); + } + + + /** + * Return the current value of the feature with given name. + *
NOTE: factory features are not used for XML Serializer.
+ *
+ * @param name The name of feature to be retrieved.
+ * @return The value of named feature.
+ * Unknown features are NOTE: factory features are not used for XML Serializer.
+ *
+ * @return A new instance of a XML Serializer.
+ * @throws XmlPullParserException if a parser cannot be created which satisfies the
+ * requested configuration.
+ */
+
+ public XmlSerializer newSerializer() throws XmlPullParserException {
+
+ if (serializerClasses == null) {
+ throw new XmlPullParserException
+ ("Factory initialization incomplete - has not tried "+classNamesLocation);
+ }
+ if(serializerClasses.size() == 0) {
+ throw new XmlPullParserException
+ ("No valid serializer classes found in "+classNamesLocation);
+ }
+
+ final StringBuilder issues = new StringBuilder ();
+
+ for (int i = 0; i < serializerClasses.size (); i++) {
+ final Class ppClass = (Class) serializerClasses.elementAt (i);
+ try {
+ final XmlSerializer ser = (XmlSerializer) ppClass.newInstance();
+
+ // for (Enumeration e = features.keys (); e.hasMoreElements ();) {
+ // String key = (String) e.nextElement();
+ // Boolean value = (Boolean) features.get(key);
+ // if(value != null && value.booleanValue()) {
+ // ser.setFeature(key, true);
+ // }
+ // }
+ return ser;
+
+ } catch(Exception ex) {
+ issues.append (ppClass.getName () + ": "+ ex.toString ()+"; ");
+ }
+ }
+
+ throw new XmlPullParserException ("could not create serializer: "+issues);
+ }
+
+ /**
+ * Create a new instance of a PullParserFactory that can be used
+ * to create XML pull parsers (see class description for more
+ * details).
+ *
+ * @return a new instance of a PullParserFactory, as returned by newInstance (null, null);
+ */
+ public static XmlPullParserFactory newInstance () throws XmlPullParserException {
+ return newInstance(null, null);
+ }
+
+ public static XmlPullParserFactory newInstance (String classNames, Class context)
+ throws XmlPullParserException {
+
+ if (context == null) {
+ //NOTE: make sure context uses the same class loader as API classes
+ // this is the best we can do without having access to context classloader in J2ME
+ // if API is in the same classloader as implementation then this will work
+ context = referenceContextClass;
+ }
+
+ String classNamesLocation = null;
+
+ if (classNames == null || classNames.length() == 0 || "DEFAULT".equals(classNames)) {
+ try {
+ InputStream is = context.getResourceAsStream (RESOURCE_NAME);
+
+ if (is == null) throw new XmlPullParserException
+ ("resource not found: "+RESOURCE_NAME
+ +" make sure that parser implementing XmlPull API is available");
+ final StringBuilder sb = new StringBuilder();
+
+ while (true) {
+ final int ch = is.read();
+ if (ch < 0) break;
+ else if (ch > ' ')
+ sb.append((char) ch);
+ }
+ is.close ();
+
+ classNames = sb.toString ();
+ }
+ catch (Exception e) {
+ throw new XmlPullParserException (null, null, e);
+ }
+ classNamesLocation = "resource "+RESOURCE_NAME+" that contained '"+classNames+"'";
+ } else {
+ classNamesLocation =
+ "parameter classNames to newInstance() that contained '"+classNames+"'";
+ }
+
+ XmlPullParserFactory factory = null;
+ final Vector parserClasses = new Vector ();
+ final Vector serializerClasses = new Vector ();
+ int pos = 0;
+
+ while (pos < classNames.length ()) {
+ int cut = classNames.indexOf (',', pos);
+
+ if (cut == -1) cut = classNames.length ();
+ final String name = classNames.substring (pos, cut);
+
+ Class candidate = null;
+ Object instance = null;
+
+ try {
+ candidate = Class.forName (name);
+ // necessary because of J2ME .class issue
+ instance = candidate.newInstance ();
+ }
+ catch (Exception e) {}
+
+ if (candidate != null) {
+ boolean recognized = false;
+ if (instance instanceof XmlPullParser) {
+ parserClasses.addElement (candidate);
+ recognized = true;
+ }
+ if (instance instanceof XmlSerializer) {
+ serializerClasses.addElement (candidate);
+ recognized = true;
+ }
+ if (instance instanceof XmlPullParserFactory) {
+ if (factory == null) {
+ factory = (XmlPullParserFactory) instance;
+ }
+ recognized = true;
+ }
+ if (!recognized) {
+ throw new XmlPullParserException ("incompatible class: "+name);
+ }
+ }
+ pos = cut + 1;
+ }
+
+ if (factory == null) {
+ factory = new XmlPullParserFactory ();
+ }
+ factory.parserClasses = parserClasses;
+ factory.serializerClasses = serializerClasses;
+ factory.classNamesLocation = classNamesLocation;
+ return factory;
+ }
+}
+
+
diff --git a/router/java/src/org/xmlpull/v1/XmlSerializer.java b/router/java/src/org/xmlpull/v1/XmlSerializer.java
new file mode 100644
index 000000000..8e85e2f0e
--- /dev/null
+++ b/router/java/src/org/xmlpull/v1/XmlSerializer.java
@@ -0,0 +1,326 @@
+package org.xmlpull.v1;
+
+import java.io.IOException;
+import java.io.OutputStream;
+import java.io.Writer;
+
+/**
+ * Define an interface to serialziation of XML Infoset.
+ * This interface abstracts away if serialized XML is XML 1.0 comaptible text or
+ * other formats of XML 1.0 serializations (such as binary XML for example with WBXML).
+ *
+ * PLEASE NOTE: This interface will be part of XmlPull 1.2 API.
+ * It is included as basis for discussion. It may change in any way.
+ *
+ * Exceptions that may be thrown are: IOException or runtime exception
+ * (more runtime exceptions can be thrown but are not declared and as such
+ * have no semantics defined for this interface):
+ * NOTE: writing CDSECT, ENTITY_REF, IGNORABLE_WHITESPACE,
+ * PROCESSING_INSTRUCTION, COMMENT, and DOCDECL in some implementations
+ * may not be supported (for example when serializing to WBXML).
+ * In such case IllegalStateException will be thrown and it is recommened
+ * to use an optional feature to signal that implementation is not
+ * supporting this kind of output.
+ */
+
+public interface XmlSerializer {
+
+ /**
+ * Set feature identified by name (recommended to be URI for uniqueness).
+ * Some well known optional features are defined in
+ *
+ * http://www.xmlpull.org/v1/doc/features.html.
+ *
+ * If feature is not recocgnized or can not be set
+ * then IllegalStateException MUST be thrown.
+ *
+ * @exception IllegalStateException If the feature is not supported or can not be set
+ */
+ void setFeature(String name,
+ boolean state)
+ throws IllegalArgumentException, IllegalStateException;
+
+
+ /**
+ * Return the current value of the feature with given name.
+ * NOTE: unknown properties are always returned as null
+ *
+ * @param name The name of feature to be retrieved.
+ * @return The value of named feature.
+ * @exception IllegalArgumentException if feature string is null
+ */
+ boolean getFeature(String name);
+
+
+ /**
+ * Set the value of a property.
+ * (the property name is recommened to be URI for uniqueness).
+ * Some well known optional properties are defined in
+ *
+ * http://www.xmlpull.org/v1/doc/properties.html.
+ *
+ * If property is not recocgnized or can not be set
+ * then IllegalStateException MUST be thrown.
+ *
+ * @exception IllegalStateException if the property is not supported or can not be set
+ */
+ void setProperty(String name,
+ Object value)
+ throws IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Look up the value of a property.
+ *
+ * The property name is any fully-qualified URI. I
+ * NOTE: unknown properties are WARNING no information about encoding is available!
+ */
+ void setOutput (Writer writer)
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Write <?xml declaration with encoding (if encoding not null)
+ * and standalone flag (if standalone not null)
+ * This method can only be called just after setOutput.
+ */
+ void startDocument (String encoding, Boolean standalone)
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Finish writing. All unclosed start tags will be closed and output
+ * will be flushed. After calling this method no more output can be
+ * serialized until next call to setOutput()
+ */
+ void endDocument ()
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Binds the given prefix to the given namespace.
+ * This call is valid for the next element including child elements.
+ * The prefix and namespace MUST be always declared even if prefix
+ * is not used in element (startTag() or attribute()) - for XML 1.0
+ * it must result in declaring NOTE: this method MUST be called directly before startTag()
+ * and if anything but startTag() or setPrefix() is called next there will be exception.
+ * NOTE: prefixes "xml" and "xmlns" are already bound
+ * and can not be redefined see:
+ * Namespaces in XML Errata.
+ * NOTE: to set default namespace use as prefix empty string.
+ *
+ * @param prefix must be not null (or IllegalArgumentException is thrown)
+ * @param namespace must be not null
+ */
+ void setPrefix (String prefix, String namespace)
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Return namespace that corresponds to given prefix
+ * If there is no prefix bound to this namespace return null
+ * but if generatePrefix is false then return generated prefix.
+ *
+ * NOTE: if the prefix is empty string "" and defualt namespace is bound
+ * to this prefix then empty string ("") is returned.
+ *
+ * NOTE: prefixes "xml" and "xmlns" are already bound
+ * will have values as defined
+ * Namespaces in XML specification
+ */
+ String getPrefix (String namespace, boolean generatePrefix)
+ throws IllegalArgumentException;
+
+ /**
+ * Returns the current depth of the element.
+ * Outside the root element, the depth is 0. The
+ * depth is incremented by 1 when startTag() is called.
+ * The depth is decremented after the call to endTag()
+ * event was observed.
+ *
+ * NOTE: that measn in particaulr that: Background: in kXML endTag had no arguments, and non matching tags were
+ * very difficult to find...
+ * If namespace is null no namespace prefix is printed but just name.
+ * If namespace is empty string then serialzier will make sure that
+ * default empty namespace is declared (in XML 1.0 xmlns='').
+ */
+ XmlSerializer endTag (String namespace, String name)
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+
+ // /**
+ // * Writes a start tag with the given namespace and name.
+ // * Background: in kXML endTag had no arguments, and non matching tags were
+ // * very difficult to find... NOTE: if there is need to close start tag
+ * (so no more attribute() calls are allowed) but without flushinging output
+ * call method text() with empty string (text("")).
+ *
+ */
+ void flush ()
+ throws IOException;
+
+}
+
+ *
+ *
+ * xmlns:prefix='namespace'
+ * (or xmlns:prefix="namespace"
depending what character is used
+ * to quote attribute value).
+ *
+ *
+ * <!-- outside --> 0
+ * <root> 1
+ * sometext 1
+ * <foobar> 2
+ * </foobar> 2
+ * </root> 1
+ * <!-- outside --> 0
+ *
+ */
+ int getDepth();
+
+ /**
+ * Returns the namespace URI of the current element as set by startTag().
+ *
+ *
+ *
+ *
+ * @return namespace set by startTag() that is currently in scope
+ */
+ String getNamespace ();
+
+ /**
+ * Returns the name of the current element as set by startTag().
+ * It can only be null before first call to startTag()
+ * or when last endTag() is called to close first startTag().
+ *
+ * @return namespace set by startTag() that is currently in scope
+ */
+ String getName();
+
+ /**
+ * Writes a start tag with the given namespace and name.
+ * If there is no prefix defined for the given namespace,
+ * a prefix will be defined automatically.
+ * The explicit prefixes for namespaces can be established by calling setPrefix()
+ * immediately before this method.
+ * If namespace is null no namespace prefix is printed but just name.
+ * If namespace is empty string then serialzier will make sure that
+ * default empty namespace is declared (in XML 1.0 xmlns='')
+ * or throw IllegalStateException if default namespace is already bound
+ * to non-empty string.
+ */
+ XmlSerializer startTag (String namespace, String name)
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Write an attribute. Calls to attribute() MUST follow a call to
+ * startTag() immediately. If there is no prefix defined for the
+ * given namespace, a prefix will be defined automatically.
+ * If namespace is null or empty string
+ * no namespace prefix is printed but just name.
+ */
+ XmlSerializer attribute (String namespace, String name, String value)
+ throws IOException, IllegalArgumentException, IllegalStateException;
+
+ /**
+ * Write end tag. Repetition of namespace and name is just for avoiding errors.
+ *
If there is no prefix defined (prefix == null) for the given namespace,
+ // * a prefix will be defined automatically.
+ // *
If explicit prefixes is passed (prefix != null) then it will be used
+ // *and namespace declared if not already declared or
+ // * throw IllegalStateException the same prefix was already set on this
+ // * element (setPrefix()) and was bound to different namespace.
+ // *
If namespace is null then prefix must be null too or IllegalStateException is thrown.
+ // *
If namespace is null then no namespace prefix is printed but just name.
+ // *
If namespace is empty string then serializer will make sure that
+ // * default empty namespace is declared (in XML 1.0 xmlns='')
+ // * or throw IllegalStateException if default namespace is already bound
+ // * to non-empty string.
+ // */
+ // XmlSerializer startTag (String prefix, String namespace, String name)
+ // throws IOException, IllegalArgumentException, IllegalStateException;
+ //
+ // /**
+ // * Write an attribute. Calls to attribute() MUST follow a call to
+ // * startTag() immediately.
+ // *
If there is no prefix defined (prefix == null) for the given namespace,
+ // * a prefix will be defined automatically.
+ // *
If explicit prefixes is passed (prefix != null) then it will be used
+ // * and namespace declared if not already declared or
+ // * throw IllegalStateException the same prefix was already set on this
+ // * element (setPrefix()) and was bound to different namespace.
+ // *
If namespace is null then prefix must be null too or IllegalStateException is thrown.
+ // *
If namespace is null then no namespace prefix is printed but just name.
+ // *
If namespace is empty string then serializer will make sure that
+ // * default empty namespace is declared (in XML 1.0 xmlns='')
+ // * or throw IllegalStateException if default namespace is already bound
+ // * to non-empty string.
+ // */
+ // XmlSerializer attribute (String prefix, String namespace, String name, String value)
+ // throws IOException, IllegalArgumentException, IllegalStateException;
+ //
+ // /**
+ // * Write end tag. Repetition of namespace, prefix, and name is just for avoiding errors.
+ // *
If namespace or name arguments are different from corresponding startTag call
+ // * then IllegalArgumentException is thrown, if prefix argument is not null and is different
+ // * from corresponding starTag then IllegalArgumentException is thrown.
+ // *
If namespace is null then prefix must be null too or IllegalStateException is thrown.
+ // *
If namespace is null then no namespace prefix is printed but just name.
+ // *
If namespace is empty string then serializer will make sure that
+ // * default empty namespace is declared (in XML 1.0 xmlns='').
+ // *