* Cleaned up the resending and choking algorithm in the streaming lib.
* Removed the read timeout override for I2PTunnel's httpclient, allowing
it to use the default for the streaming lib.
* Revised ack triggers in the streaming lib.
* Logging.
* Cleaned up the postinstall/startup scripts a bit more to handle winME,
and added windows info to the headless docs. (thanks ardvark!)
* Fixed a harmless (yet NPE inspiring) race during the final shutdown of
a stream (thanks frosk!)
* Add a pair of new stats for monitoring tunnel participation -
tunnel.participatingBytesProcessed (total # bytes transferred) and
tunnel.participatingBytesProcessedActive (total # bytes transferred for
tunnels whose byte count exceed the 10m average). This should help
further monitor congestion issues.
* Made the NamingService factory property public (thanks susi!)
* Catch another oddball case for a reset connection in the streaming lib.
* Add a dumpprofile.jsp page, called with ?peer=base64OfPeerHash, which
dumps the current state of that peer's profile. Instead of the full
base64, you can pass in however many characters you have and it will
return the first match found.
* Handle hard disconnects more gracefully within the streaming lib, and
log unmonitored events more aggressively.
* If we drop a peer after connection due to clock skew, log it to the
/logs.jsp#connectionlogs with relevent info. In addition, toss it in
the stat 'tcp.disconnectAfterSkew'.
* Fixed the formatting in the skew display
* Added an ERROR message that is fired once after we run out of
routerInfo files (thanks susi!)
* Set the connect timeout equal to the streaming lib's disconnect timeout
if not already specified (the I2PTunnel httpclient already enforces a
60s connect timeout)
* Fix for another connection startup problem in the streaming lib.
* Fix for a stupid error in the probabalistic drop (rand <= P, not > P)
* Adjust the capacity calculations so that tunnel failures alone in the
last 10m will not trigger a 0 capacity rank.
* Reenable the probabalistic drop on the TCP queues to deal with good old
fashioned bandwidth limiting. However, by default the probability is
rigged to reserve 0% of the queue free - meaning we just aggressively
fail messages in the queue if we're transferring too slowly. That
reservation factor can be increased with 'tcp.queueFreeFactor=0.25'
(or whatever) and the drop code can be disabled with the parameter
'tcp.dropProbabalistically=false'.
* Still penalize a peer on tunnel failure, but don't immediately drop
their capacity to 0.
* More aggressively ACK duplicates
* Randomize the timestamper period
* Display the clock skew on the connection logs when a peer sends it.
* Allow the timestamper to fix skews of up to 10 minutes
* Logging
* Fix the missing HTTP timeout, which was caused by the deferred syn used
by default. This, in turn, meant the I2PSocket creation doesn't fail
on .connect, but is unable to transfer any data in any direction. We now
detect that condition for the I2PTunnelHTTPClient and throw up the right
error page.
* Logging
* Use a simpler and less memory intensive job for processing outbound
client messages when the session is in mode=bestEffort. We can
immediately discard the data as soon as its sent the first time,
rather than wait for an ack, since we will never internally resend.
* Reduce some synchronization to avoid a rare deadlock
* Replaced 'localhost' with 127.0.0.1 in the i2ptunnel config, and special
case it within the tunnel controller.
* Script cleanup for building jbigi/jcpuid
* Logging
* Revised the buffering when reading from the SAM client and writing
to the stream. Also added a thread (sigh) so we don't block the
SAM client from giving us more messages for abnormally long periods
of time.
* Display the router version in the logs on startup (oft requested)
* Fix a race during the closing of a messageOutputStream
* Don't do a 'passive flush' while there are already outbound messages
unacked.
* Show the reseed link if up to 10 peers profiles are active (thanks
dburton!)
* Don't do a 'passive flush' while there are already outbound messages
unacked.
* Show the reseed link if up to 10 peers profiles are active (thanks
dburton!)
* Fix the recently broken SAM bridge (duh)
* Add a new pair of SAM apps - net.i2p.sam.client.SAMStreamSink and
net.i2p.sam.client.SAMStreamSend, mirroring the streaming lib's
StreamSink and StreamSend apps for transferring files.
* Make the passive flush timer fire more frequently.
* Toss in a small pool of threads (3) to execute the events queued up with
the SimpleTimer, as we do currently see the occational event
notification spiking up to a second or so.
* Implement a SAM client API in java, useful for event based streaming (or
for testing the SAM bridge)
* Added support to shut down the SAM bridge on OOM (useful if the SAM
bridge is being run outside of the router).
* Include the SAM test code in the sam.jar
* Remove an irrelevent warning message from SAM, which was caused by
perfectly normal operation due to a session being closed.
* Removed some unnecessary synchronization in the streaming lib's
PacketQueue
* More quickly clean up the memory used by the streaming lib by
immediately killing each packet's resend job as soon as it is ACKed (or
cancelled), so that there are no longer any valid pointers to the
(potentially 32KB) packet.
* Fixed the timestamps dumped to stdout when debugging the PacketHandler.
* Drop packets that would expand our inbound window beyond our maximum
buffer size (default 32 messages)
* Always read the ACK/NACK data from the verified packets received, even
if we are going to drop them
* Always adjust the window when there are messages ACKed, though do not
change its size except as before.
* Streamlined some synchronization in the router's I2CP handling
* Streamlined some memory allocation in the SAM bridge
* Default the streaming lib to disconnect on inactivity, rather than send
an empty message.
this still doesnt get the BT to where it needs to be, or fix the timeout problem,
but i dont like having so many commits outstanding and these updates are sound
2004-12-01 jrandom
* Strip out any of the Accept-* HTTP header lines, and always make sure to
include the forged User-agent header.
* Adjust the default read timeout on the eepproxy to 60s, unless
overridden.
* Minor tweak on stream shutdown.
* Render the burst rate fields on /config.jsp properly (thanks ugha!)
* Build in a simple timeout to flush data queued into the I2PSocket but
not yet flushed.
* Don't explicitly flush after each SAM stream write, but leave it up to
the [nonblocking] passive flush.
* Don't whine about 10-99 connection events occurring in a second
* Don't wait for completion of packets that will not be ACKed (duh)
* Adjust the congestion window, even if the packet was resent (duh)
* Make sure to wake up any blocking read()'s when the MessageInputStream
is close()ed (duh)
* Never wait more than the disconnect timeout for a write to complete
* Reduced contention for local client delivery
* Drop the new code that munges the wrapper.config. Instead, updates that
need to change it will include their own wrapper.config in the
i2pupdate.zip, overwriting the existing file. If the file
"wrapper.config.updated" is included, it is deleted at first opportunity
and the router shut down, displaying a notice that the router must be
started again cleanly to allow the changes to the wrapper.config to take
effect.
* Properly stop accept()ing I2PSocket connections if we close down the
session (duh).
* Make sure we cancel any outstanding Packets in flight when a connection
is terminated (thanks susi!)
* Split up the I2PTunnel closing a little further.
* Some cleanup and bugfixes for the IP address detection code where we
only consider connections that have actually sent and received messages
recently as active, rather than the mere presence of a TCP socket as
activity.
* Fix for a fast loop caused by a race in the new streaming library (thanks
DrWoo, frontier, pwk_, and thetower!)
* Minor updates to the SimpleTimer and Connection to help track down a
high CPU usage problem (dumping debug info to stdout/wrapper.log if too
many events/tasks fire in a second)
* Minor fixes for races on client disconnects (causing NPEs)
if you want to get this data and you're running outside the router, just toss on a
"-Dstat.logFilters=* -Dstat.logFile=proxy.stats" to the java command line. the resulting
file can be parsed w/ java -cp lib/i2p.jar net.i2p.stat.StatLogSplitter proxy.stats, then fed
into gnuplot or whatever
further and cancel all of the tags we're using for that peer so that we can react to their
potential restart / tag loss quicker.
* use the minimum resend delay as the base to be exponentiated if our RTT is too low
(so we resend less)
* dont be such a wuss when flushing a closed stream
* add new back-off logic to reduce payload resends during transient
lag - only let one packet be resent at a time, even if the window size
allows it (and the packet timers request it). this should make
congestion less painful, and reduce the overall number of messages
resent (as the SACKs for the one packet actively resent should clarify
what made it through)
* make sure we ack duplicate messages received (if we aren't already doing so)
* implement a choke on the local buffer, in case we receive data faster than its
removed from the i2psocket's MessageInputStream (handle via packet drop and
explicit congestion notification)
