2005-09-17 jrandom
* Clean up syndie a bit more and bundle a default introductory post with
both new installs and updates.
* Typo fixes on the console (thanks bar!)
* Added the natively compiled jbigi and patched java service wrapper for
OS X. Thanks Bill Dorsey for letting me use your machine!
* Don't build i2p.exe or i2pinstall.exe when run on OS X machines, as we
don't bundle the binutils necessary (and there'd be a naming conflict
if we did).
* Added 'single user' functionality to syndie - if the single user
checkbox on the admin page is checked, all users are allowed to control
the instance and sync up with remote syndie nodes.
* Temporarily disable the x-i2p-gzip in i2ptunnel until it is more closely
debugged.
* Adjust I2PTunnelHTTPServer so it can be used for outproxy operators
(just specify the spoofed host as an empty string), allowing them to
honor x-i2p-gzip encoding.
* Let windows users build the exes too (thanks bar and redzara!)
* Allow I2PTunnel httpserver operators to disable gzip compression on
individual tunnels with the i2ptunnel.gzip=false client option
(good idea susi!)
* Added the i2p.exe and i2pinstall.exe for windows users, using launch4j.
* Added runplain.sh for *nix/osx users having problems using the java
service wrapper (called from the install dir as: sh runplain.sh)
* Bundle susidns and syndie, with links on the top nav
* Have I2PTunnelHTTPClient and I2PTunnelHTTPServer use the x-i2p-gzip
content-encoding (if offered), reducing the payload size before it
reaches the streaming lib. The existing compression is at the i2cp
level, so we've been packetizing 4KB of uncompressed data and then
compressing those messages, rather than compressing and then packetizing
4KB of compressed data. This should reduce the number of round trips
to fetch web pages substantially.
* Adjust the startup and timing of the addressbook so that susidns always
has config to work off, and expose a method for susidns to tell it to
reload its config and rerun.
2005-07-27 jrandom
* Enabled SSU as the default top priority transport, adjusting the
config.jsp page accordingly.
* Add verification fields to the SSU and TCP connection negotiation (not
compatible with previous builds)
* Enable the backwards incompatible tunnel crypto change as documented in
tunnel-alt.html (have each hop encrypt the received IV before using it,
then encrypt it again before sending it on)
* Disable the I2CP encryption, leaving in place the end to end garlic
encryption (another backwards incompatible change)
* Adjust the protocol versions on the TCP and SSU transports so that they
won't talk to older routers.
* Fix up the config stats handling again
* Fix a rare off-by-one in the SSU fragmentation
* Reduce some unnecessary netDb resending by inluding the peers queried
successfully in the store redundancy count.
* Added the possibility for i2ptunnel client and httpclient instances to
have their own i2p session (and hence, destination and tunnels). By
default, tunnels are shared, but that can be changed on the web
interface or with the sharedClient config option in i2ptunnel.config.
2005-04-17 jrandom
* Marked the net.i2p.i2ptunnel.TunnelManager as deprecated. Anyone use
this? If not, I want to drop it (lots of tiny details with lots of
duplicated semantics).
* Added new user-editable eepproxy error page templates.
2005-04-17 jrandom
* Revamp the tunnel building throttles, fixing a situation where the
rebuild may not recover, and defaulting it to unthrottled (users with
slow CPUs may want to set "router.tunnel.shouldThrottle=true" in their
advanced router config)
2005-03-29 jrandom
* Decreased the initial RTT estimate to 10s to allow more retries.
* Increased the default netDb store replication factor from 2 to 6 to take
into consideration tunnel failures.
* Address some statistical anonymity attacks against the netDb that could
be mounted by an active internal adversary by only answering lookups for
leaseSets we received through an unsolicited store.
* Don't throttle lookup responses (we throttle enough elsewhere)
* Fix the NewsFetcher so that it doesn't incorrectly resume midway through
the file (thanks nickster!)
* Updated the I2PTunnel HTML (thanks postman!)
* Added support to the I2PTunnel pages for the URL parameter "passphrase",
which, if matched against the router.config "i2ptunnel.passphrase" value,
skips the nonce check. If the config prop doesn't exist or is blank, no
passphrase is accepted.
* Implemented HMAC-SHA256.
* Enable the tunnel batching with a 500ms delay by default
* Dropped compatability with 0.5.0.3 and earlier releases
2005-03-18 jrandom
* Minor tweak to the timestamper to help reduce small skews
* Adjust the stats published to include only the relevent ones
* Only show the currently used speed calculation on the profile page
* Allow the full max # resends to be sent, rather than piggybacking the
RESET packet along side the final resend (duh)
* Add irc.postman.i2p to the default list of IRC servers for new installs
* Drop support for routers running 0.5 or 0.5.0.1 while maintaining
backwards compatability for users running 0.5.0.2.
2005-03-06 jrandom
* Allow the I2PTunnel web interface to select streaming lib options for
individual client tunnels, rather than sharing them across all of them,
as we do with the session options. This way people can (and should) set
the irc proxy to interactive and the eepproxy to bulk.
* Added a startRouter.sh script to new installs which simply calls
"sh i2prouter start". This should make it clear how people should start
I2P.
* Fixed the braindead tunnel testing logic
* If a large number of tunnels are failing (within the last 5-10 minutes)
and the current tunnel pool's configuration allows it, randomly build a
zero hop tunnel to replace failed tunnels.
* Enable postman's POP3 and SMTP tunnels by default
* (Merged the 0.5-pre branch back into CVS HEAD)
* Replaced the old tunnel routing crypto with the one specified in
router/doc/tunnel-alt.html, including updates to the web console to view
and tweak it.
* Provide the means for routers to reject tunnel requests with a wider
range of responses:
probabalistic rejection, due to approaching overload
transient rejection, due to temporary overload
bandwidth rejection, due to persistent bandwidth overload
critical rejection, due to general router fault (or imminent shutdown)
The different responses are factored into the profiles accordingly.
* Replaced the old I2CP tunnel related options (tunnels.depthInbound, etc)
with a series of new properties, relevent to the new tunnel routing code:
inbound.nickname (used on the console)
inbound.quantity (# of tunnels to use in any leaseSets)
inbound.backupQuantity (# of tunnels to keep in the ready)
inbound.length (# of remote peers in the tunnel)
inbound.lengthVariance (if > 0, permute the length by adding a random #
up to the variance. if < 0, permute the length
by adding or subtracting a random # up to the
variance)
outbound.* (same as the inbound, except for the, uh, outbound tunnels
in that client's pool)
There are other options, and more will be added later, but the above are
the most relevent ones.
* Replaced Jetty 4.2.21 with Jetty 5.1.2
* Compress all profile data on disk.
* Adjust the reseeding functionality to work even when the JVM's http proxy
is set.
* Enable a poor-man's interactive-flow in the streaming lib by choking the
max window size.
* Reduced the default streaming lib max message size to 16KB (though still
configurable by the user), also doubling the default maximum window
size.
* Replaced the RouterIdentity in a Lease with its SHA256 hash.
* Reduced the overall I2NP message checksum from a full 32 byte SHA256 to
the first byte of the SHA256.
* Added a new "netId" flag to let routers drop references to other routers
who we won't be able to talk to.
* Extended the timestamper to get a second (or third) opinion whenever it
wants to actually adjust the clock offset.
* Replaced that kludge of a timestamp I2NP message with a full blown
DateMessage.
* Substantial memory optimizations within the router and the SDK to reduce
GC churn. Client apps and the streaming libs have not been tuned,
however.
* More bugfixes thank you can shake a stick at.
2005-02-13 jrandom
* Updated jbigi source to handle 64bit CPUs. The bundled jbigi.jar still
only contains 32bit versions, so build your own, placing libjbigi.so in
your install dir if necessary. (thanks mule!)
* Added support for libjbigi-$os-athlon64 to NativeBigInteger and CPUID
(thanks spaetz!)
* i2pProxy.pac, i2pbench.sh, and i2ptest.sh are now shipped with the dist
packages and installed to $i2pinstalldir/scripts.
* Added command line params to i2ptest.sh and i2pbench.sh: --gij to run them
using gij + libgcj, and --sourcedir to run them from the source tree
instead of the installation directory.
* Fixed unreachable for() statement clause in the KBucketImpl class that was
causing gcj to toss a compilation warning (jrandom++).
2005-01-06 jrandom
* Added a startup message to the addressbook, printing its version number
to stdout (which is sent to wrapper.config) when it loads.
* Updated the addressbook to reread the config file periodically
* Added orion.i2p to the list of eepsites on the default homepage
* Cleaned up the postinstall/startup scripts a bit more to handle winME,
and added windows info to the headless docs. (thanks ardvark!)
* Fixed a harmless (yet NPE inspiring) race during the final shutdown of
a stream (thanks frosk!)
* Add a pair of new stats for monitoring tunnel participation -
tunnel.participatingBytesProcessed (total # bytes transferred) and
tunnel.participatingBytesProcessedActive (total # bytes transferred for
tunnels whose byte count exceed the 10m average). This should help
further monitor congestion issues.
* Made the NamingService factory property public (thanks susi!)
* Added a new i2ptunnel type: 'httpserver', allowing you to specify what
hostname should be sent to the webserver. By default, new installs will
have an httpserver pointing at their jetty instance with the spoofed
name 'mysite.i2p' (editable on the /i2ptunnel/edit.jsp page).
* Use a simpler and less memory intensive job for processing outbound
client messages when the session is in mode=bestEffort. We can
immediately discard the data as soon as its sent the first time,
rather than wait for an ack, since we will never internally resend.
* Reduce some synchronization to avoid a rare deadlock
* Replaced 'localhost' with 127.0.0.1 in the i2ptunnel config, and special
case it within the tunnel controller.
* Script cleanup for building jbigi/jcpuid
* Logging
2004-12-01 jrandom
* Fixed a stupid typo that inadvertantly allowed persistent HTTP
connections to work (thanks duck!)
* Make sure we override the inactivity timeout too
2004-12-01 jrandom
* Strip out any of the Accept-* HTTP header lines, and always make sure to
include the forged User-agent header.
* Adjust the default read timeout on the eepproxy to 60s, unless
overridden.
* Minor tweak on stream shutdown.
* Reduced contention for local client delivery
* Drop the new code that munges the wrapper.config. Instead, updates that
need to change it will include their own wrapper.config in the
i2pupdate.zip, overwriting the existing file. If the file
"wrapper.config.updated" is included, it is deleted at first opportunity
and the router shut down, displaying a notice that the router must be
started again cleanly to allow the changes to the wrapper.config to take
effect.
* Properly stop accept()ing I2PSocket connections if we close down the
session (duh).
* Make sure we cancel any outstanding Packets in flight when a connection
is terminated (thanks susi!)
* Split up the I2PTunnel closing a little further.
* Revised the installer to include start menu and desktop shortcuts for
windows platforms, including pretty icons (thanks DrWoo!)
* Allow clients specified in clients.config to have an explicit startup
delay.
* Update the default install to launch a browser pointing at the console
whenever I2P starts up, rather than only the first time it starts up
(configurable on /configservice.jsp, or in clients.config)
* Bugfix to the clock skew checking code to monitor the delta between
offsets, not the offset itself (duh)
* Router console html update
* New (and uuuuugly) code to verify that the wrapper.config contains
the necessary classpath entries on update. If it has to update the
wrapper.config, it will stop the JVM and service completely, since the
java service wrapper doesn't reread the wrapper.config on JVM restart -
requiring the user to manually restart the service after an update.
* Increase the TCP connection timeout to 30s (which is obscenely long)
------------------------------------------------
* Update the I2PTunnel web interface to include an option for the new
streaming lib (which is ignored until the 0.4.2 release).
* Revised the I2PTunnel web interface to keep the I2CP options of client
and httpclient tunnels in sync, as they all share the same I2CP session.
* Fix a strange race condition on i2cp client disconnect.
* win98 startup fixes (thanks tester-1 and ardvark!)
* include build scripts for the new streaming lib (which is NOT ready
for use yet, but you can hack around with it)
(enjoy, duck)
2004-09-30 jrandom
* Bundle the configuration necessary to run an eepsite out of the box
with Jetty - simply edit ./eepsite/docroot/index.html and give people
the key listed on the I2PTunnel configuration page, and its up.
* Router console cleanup, and some (off by default) tunnels -
smtp.postman.i2p (port 7659), pop.postman.i2p (port 7660), and
irc.baffled.i2p (port 7661)
