* Really disable the streaming lib packet caching
* Synchronized a message handling point in the SDK (even though its use is
already essentially single threaded, its better to play it safe)
* Don't add new RepublishLeaseSetJobs on failure, just requeue up the
existing one (duh)
* Throttle the number of concurrent pending tunnel builds across all
pools, in addition to simply throttling the number of new requests per
minute for each pool individually. This should avoid the cascading
failure when tunnel builds take too long, as no new builds will be
created until the previous ones are handled.
* Factored out and extended the DataHelper's unit tests for dealing with
long and date formatting.
* Explicitly specify the HTTP auth realm as "i2prouter", though this
alone doesn't address the bug where jetty asks for authentication too
much. (thanks orion!)
* Updated the StreamSinkServer to ignore all read bytes, rather than write
them to the filesystem.
* Adjusted (and fixed...) the timestamper change detection
* Deal with a rare reordering bug at the beginning of a stream (so we
don't drop it unnecessarily)
* Cleaned up some dropped message handling in the router
* Reduced job queue churn when dealing with a large number of tunnels by
sharing an expiration job
* Keep a separate list of the most recent CRIT messages (shown on the
logs.jsp). This way they don't get buried among any other messages.
* For clarity, display the tunnel variance config as "Randomization" on
the web console.
* If lease republishing fails (boo! hiss!) try it again
* Actually fix the negative jobLag in the right place (this time)
* Allow reseeding when there are less than 10 known peer references
* Lots of logging updates.
* Allow the streaming lib resend frequency to drop down to 20s as the
minimum, so that up to 2 retries can get sent on an http request.
* Add further limits to failsafe tunnels.
* Keep exploratory and client tunnel testing and building stats separate.
* Only use the 60s period for throttling tunnel requests due to transient
network overload.
* Rebuild tunnels earlier (1-3m before expiration, by default)
* Cache the next hop's routerInfo for participating tunnels so that the
tunnel participation doesn't depend on the netDb.
* Fixed a long standing bug in the streaming lib where we wouldn't always
unchoke messages when the window size grows.
* Make sure the window size never reaches 0 (duh)
* (Merged the 0.5-pre branch back into CVS HEAD)
* Replaced the old tunnel routing crypto with the one specified in
router/doc/tunnel-alt.html, including updates to the web console to view
and tweak it.
* Provide the means for routers to reject tunnel requests with a wider
range of responses:
probabalistic rejection, due to approaching overload
transient rejection, due to temporary overload
bandwidth rejection, due to persistent bandwidth overload
critical rejection, due to general router fault (or imminent shutdown)
The different responses are factored into the profiles accordingly.
* Replaced the old I2CP tunnel related options (tunnels.depthInbound, etc)
with a series of new properties, relevent to the new tunnel routing code:
inbound.nickname (used on the console)
inbound.quantity (# of tunnels to use in any leaseSets)
inbound.backupQuantity (# of tunnels to keep in the ready)
inbound.length (# of remote peers in the tunnel)
inbound.lengthVariance (if > 0, permute the length by adding a random #
up to the variance. if < 0, permute the length
by adding or subtracting a random # up to the
variance)
outbound.* (same as the inbound, except for the, uh, outbound tunnels
in that client's pool)
There are other options, and more will be added later, but the above are
the most relevent ones.
* Replaced Jetty 4.2.21 with Jetty 5.1.2
* Compress all profile data on disk.
* Adjust the reseeding functionality to work even when the JVM's http proxy
is set.
* Enable a poor-man's interactive-flow in the streaming lib by choking the
max window size.
* Reduced the default streaming lib max message size to 16KB (though still
configurable by the user), also doubling the default maximum window
size.
* Replaced the RouterIdentity in a Lease with its SHA256 hash.
* Reduced the overall I2NP message checksum from a full 32 byte SHA256 to
the first byte of the SHA256.
* Added a new "netId" flag to let routers drop references to other routers
who we won't be able to talk to.
* Extended the timestamper to get a second (or third) opinion whenever it
wants to actually adjust the clock offset.
* Replaced that kludge of a timestamp I2NP message with a full blown
DateMessage.
* Substantial memory optimizations within the router and the SDK to reduce
GC churn. Client apps and the streaming libs have not been tuned,
however.
* More bugfixes thank you can shake a stick at.
2005-02-13 jrandom
* Updated jbigi source to handle 64bit CPUs. The bundled jbigi.jar still
only contains 32bit versions, so build your own, placing libjbigi.so in
your install dir if necessary. (thanks mule!)
* Added support for libjbigi-$os-athlon64 to NativeBigInteger and CPUID
(thanks spaetz!)
* Added a couple of scripts, i2ptest.sh and i2pbench.sh, to manage the core
tests and benchmarks.
* Routerconsole now builds under gcj 3.4.3.
* Corrected divide by zero error in TunnelId class under gcj (jrandom++).
* Catch another oddball case for a reset connection in the streaming lib.
* Add a dumpprofile.jsp page, called with ?peer=base64OfPeerHash, which
dumps the current state of that peer's profile. Instead of the full
base64, you can pass in however many characters you have and it will
return the first match found.
* Render the burst rate fields on /config.jsp properly (thanks ugha!)
* Build in a simple timeout to flush data queued into the I2PSocket but
not yet flushed.
* Don't explicitly flush after each SAM stream write, but leave it up to
the [nonblocking] passive flush.
* Don't whine about 10-99 connection events occurring in a second
* Don't wait for completion of packets that will not be ACKed (duh)
* Adjust the congestion window, even if the packet was resent (duh)
* Make sure to wake up any blocking read()'s when the MessageInputStream
is close()ed (duh)
* Never wait more than the disconnect timeout for a write to complete
* Revised the installer to include start menu and desktop shortcuts for
windows platforms, including pretty icons (thanks DrWoo!)
* Allow clients specified in clients.config to have an explicit startup
delay.
* Update the default install to launch a browser pointing at the console
whenever I2P starts up, rather than only the first time it starts up
(configurable on /configservice.jsp, or in clients.config)
* Bugfix to the clock skew checking code to monitor the delta between
offsets, not the offset itself (duh)
* Router console html update
* New (and uuuuugly) code to verify that the wrapper.config contains
the necessary classpath entries on update. If it has to update the
wrapper.config, it will stop the JVM and service completely, since the
java service wrapper doesn't reread the wrapper.config on JVM restart -
requiring the user to manually restart the service after an update.
* Increase the TCP connection timeout to 30s (which is obscenely long)
------------------------------------------------
* Only allow small clock skews after the first 10 minutes of operation
(to prevent later network lag bouncing us way off course - yes, we
really need an NTP impl to balance out the network burps...)
* Revamp the I2PTunnel web interface startup process so that everything
is shown immediately, so that different pieces hanging don't hang
the rest, and other minor bugfixes.
* Take note of SAM startup error (in case you're already running a SAM
bridge...)
* Increase the bandwidth limiter burst values available to 10-60s (or
whatever is placed in /configadvanced.jsp, of course)
* Allow end of line comments in the hosts.txt and other config files,
using '#' to begin the comments (thanks susi!)
* Add support to I2PTunnel's 'client' feature for picking between multiple
target destinations (e.g. 'client 6668 irc.duck.i2p,irc.baffled.i2p')
* Add a quick link on the left hand nav to reseed if there aren't enough
known peers, as well as link to the config page if there are no active
peers. Revised config page accordingly.
* Expose a drop down on the /configclients.jsp to enter the outbound
tunnel depth.
* Improved *hosts.txt loading
* Explicitly override the JVM's timezone settings to use GMT so that
any client applications which use timezones won't leak sensitive
data (thanks gott!)
* Bundle sam.jar in the update (thanks duck!)
* Bundle the configuration necessary to run an eepsite out of the box
with Jetty - simply edit ./eepsite/docroot/index.html and give people
the key listed on the I2PTunnel configuration page, and its up.
plus minor bugfixes / refactoring / logging
- sendsPerFailure: how many partial sends we make when they all fail
- timeoutCongestionInbound: describes how much faster than our average speed we were receiving data when each partial send timed out (in Bps)
- timeoutCongestionMessage: our send processing time when each partial send timed out (in ms)
- timeoutCongestionTunnel: our tunnel test time when each partial send timed out (in ms)
- participatingMessagesProcessedActive: # of messages more than the (most recent) average that a tunnel we were participating in transmitted (for tunnels with more than the average)
* updated to use Writer for rendering the console, so we can do partial writes (and hopefully help debug some kooky threading bugs on kaffe)
* Always wipe the Jetty work directory on startup, so that web updates
are reflected immediately (Jetty does not honor the cache across
multiple executions)
in addition, refactor various file ops out of the DataHelper into FileUtil
* Limit the number of connection tags saved to 10,000. This is a huge
limit, but consumes no more than 1MB of RAM. For now, we drop them
randomly after reaching that size, forcing those dropped peers to use
a full DH negotiation.
* HTML cleanup in the console.
* Update for the SDK reconnection to deal with overflow.
* Web improvements (@ not # on the /logs.jsp [thanks ugha!] and fixed the
rounding on lifetime bandwidth used [thanks gott!]).
2004-09-08 jrandom
* Updated the "Active:" peer count to display the # of connections as well
as the number of recently active router identities.
* Implement some basic updating code - on startup, if there is a file named
"i2pupdate.zip" in the I2P installation directory, extract it, delete it,
then restart.
* Added an ugly little script to allow launching the router on win9x
machines without a dos box (using javaw to run a .bat file).
* Logging updates.
* Updated VERSION constants to 0.4.0.1
* Write the native libraries to the current directory when they are loaded
from a resource, and load them from that file on subsequent runs (in
turn, we no longer *cough* delete the running libraries...)
* Added support for a graceful restart.
* Added new pseudo-shutdown hook specific to the router, allowing
applications to request tasks to be run when the router shuts down. We
use this for integration with the service manager, since otherwise a
graceful shutdown would cause a timeout, followed by a forced hard
shutdown.
* Handle a bug in the SimpleTimer with requeued tasks.
* Made the capacity calculator a bit more dynamic by not outright ignoring
the otherwise valid capacity data for a period with a single rejected
tunnel (except for the 10 minute period). In addition, peers with an
equal capacity are ordered by speed rather than by their hashes.
* Cleaned up the SimpleTimer, addressing some threading and synchronization
issues.
* When an I2PTunnel client or httpclient is explicitly closed, destroy the
associated session (unless there are other clients using it), and deal
with a closed session when starting a new I2PTunnel instance.
* Refactoring and logging.
* Address a race condition in the key management code that would manifest
itself as a corrupt router identity.
* Properly clear old transport addresses from being displayed on the old
console after soft restarts.
* Properly refuse to load the client applications more than once in the
same JVM.
* Added support for a graceful restart (a graceful shutdown followed by a
full JVM restart - useful for restarting client apps).
* More defensive programming, HTML cleanup, logging
* wrapper.config cleanup of duplicate lines
* Updated default wrapper.config to deal with the hard restart option
* Include the history.txt in the /help.jsp page
* HTML updates (wrapper.log, and no more unix scripts)
* Updated VERSION constants to 0.4
* use that to render the last few lines of the wrapper log on /logs.jsp (for the on demand stack trace)
* thread creation / finalization logging
* support a hard restart (stop immediately and restart the JVM) - useful for rerunning clients.config (etc)
* systray when not supported
* hook in to the service manager and let it know we're exiting gracefully (when appropriate)
* commented out but generally functional systray integration. i cant get it to build sometimes though, something is b0rking up
- set the nonce and noncePrev for the handler when rendering the form
- include the current nonce in the hidden parameter "nonce"
- include an "action" parameter (so we know we want to execute something and hence, validate the nonce, rather than just display the page)
- if the nonce submitted doesnt match what is set in the nonce or noncePrev when validating, its invalid. refuse to process
* new safer way of shutting down the router per discussions with oOo (dealing with a graceful
shutdown where the user updates their config before the shutdown is complete, etc)
* graceful shutdown implemented in the router - shutdownGracefully(), cancelGracefulShutdown(), shutdownInProgress()
* apply oOo's patch for beautifying the new console w/ links to a shitlisted peer's netDb entry
* apply oOo's patch to clean up the peer shitlist count more aggressively
* apply oOo's patch to allow removing lines via /configadvanced.jsp
* apply oOo's patch to clean up the memory usage display
* apply oOo's patch to include log messages on /logs.jsp most recent first, rather than last
* get rid of the netDb key shitlist (its a bad idea, better solution coming soon)
> Message-ID: <1776.202.37.75.101.1092369510.squirrel@202.37.75.101>
> From: adam@adambuckley.net
> To: jrandom@i2p.net
>
> [...]
>
> I hereby authorize my NtpClient.java and NtpMessage.java code to be
> redistributed under the BSD license for the purpose of integration with
> the I2P project, providing that I am credited as the original author of
> the code.
>
> [...]
w00t! adam++
code migrated into core/java/src/net/i2p/time, integrated with Clock,
dropping that whole ugly pass-the-time-through-URL, and hence dropped
support for :7655/setTime.
New router.config properties to control the timestamper:
time.sntpServerList=pool.ntp.org,pool.ntp.org,pool.ntp.org
time.queryFrequencyMs=300000
time.disabled=false
So, to disable, add time.disabled=true to your router.config. It is
enabled by default.
Default router.config and startup scripts updated accordingly (since
timestamper.jar is now gone)
