* Really disable the streaming lib packet caching
* Synchronized a message handling point in the SDK (even though its use is
already essentially single threaded, its better to play it safe)
* Don't add new RepublishLeaseSetJobs on failure, just requeue up the
existing one (duh)
* Throttle the number of concurrent pending tunnel builds across all
pools, in addition to simply throttling the number of new requests per
minute for each pool individually. This should avoid the cascading
failure when tunnel builds take too long, as no new builds will be
created until the previous ones are handled.
* Factored out and extended the DataHelper's unit tests for dealing with
long and date formatting.
* Explicitly specify the HTTP auth realm as "i2prouter", though this
alone doesn't address the bug where jetty asks for authentication too
much. (thanks orion!)
* Updated the StreamSinkServer to ignore all read bytes, rather than write
them to the filesystem.
* Don't rerequest leaseSets if there are already pending requests
* Reverted the insufficiently tested caching in the DSA/SHA1 impl, and
temporary disabled the streaming lib packet caching.
* Reduced the resend RTT penalty to 10s
* Further streaming lib caching improvements
* Reduce the minimum RTT (used to calculate retry timeouts), but also
increase the RTT on resends.
* Lower the default message size to 4KB from 16KB to further reduce the
chance of failed fragmentation.
* Extend tunnel rebuild throttling to include fallback rebuilds
* If there are less than 20 routers known, don't drop the last 20 (to help
avoid dropping all peers under catastrophic failures)
* New stats for end to end messages - "client.leaseSetFoundLocally",
"client.leaseSetFoundRemoteTime", and "client.leaseSetFailedRemoteTime"
* Throttle the number of tunnel rebuilds per minute, preventing CPU
overload under catastrophic failures (thanks Tracker and cervantes!)
* Block the router startup process until we've initialized the clock
* Cache temporary memory allocation in the DSA's SHA1 impl, and the packet
data in the streaming lib.
* Fixed a streaming lib bug where the connection initiator would fail the
stream if the ACK to their SYN was lost.
* Reworked the tunnel (re)building process to remove the tokens and
provide cleaner controls on the tunnels built.
* Fixed situations where the timestamper wanted to test more servers than
were provided (thanks Tracker!)
* Get rid of the dead SAM sessions by using the streaming lib's callbacks
(thanks Tracker!)
* Temporary workaround for the I2CP disconnect bug (have the streaminglib
try to automatically reconnect on accept()/connect(..)).
* Loop check for expired lease republishing (just in case)
* Adjusted (and fixed...) the timestamper change detection
* Deal with a rare reordering bug at the beginning of a stream (so we
don't drop it unnecessarily)
* Cleaned up some dropped message handling in the router
* Reduced job queue churn when dealing with a large number of tunnels by
sharing an expiration job
* Keep a separate list of the most recent CRIT messages (shown on the
logs.jsp). This way they don't get buried among any other messages.
* For clarity, display the tunnel variance config as "Randomization" on
the web console.
* If lease republishing fails (boo! hiss!) try it again
* Actually fix the negative jobLag in the right place (this time)
* Allow reseeding when there are less than 10 known peer references
* Lots of logging updates.
* Only build new extra tunnels on failure if we don't have enough
* Fix a fencepost in the tunnel building so that e.g. a variance of
2 means +/- 2, not +/- 1 (thanks dm!)
* Avoid an NPE on client disconnect
* Never select a shitlisted peer to participate in a tunnel
* Have netDb store messages timeout after 10s, not the full 60s (duh)
* Keep session tags around for a little longer, just in case (grr)
* Cleaned up some closing event issues on the streaming lib
* Stop bundling the jetty 5.1.2 and updated wrapper.config in the update
so that 0.4.* users will need to do a clean install, but we don't need
to shove an additional 2MB in each update to those already on 0.5.
* Imported the susimail css (oops, thanks susi!)
* Added some error handling when the number of session tags exceeds the
realistic capacity, dropping a random chunk of received tag sets and
conducting some minor analysis of the remaining ones. This is a part
of a pretty serious error condition, and logs as CRIT (if/when people
see "TOO MANY SESSION TAGS!", please let me know the full log line it
puts in the wrapper.log or /logs.jsp)
* Update the addressbook to only write to the published hosts location
if the addressbook's config contains "should_publish=true" (by default,
it contains "should_publish=false")
* (Merged the 0.5-pre branch back into CVS HEAD)
* Replaced the old tunnel routing crypto with the one specified in
router/doc/tunnel-alt.html, including updates to the web console to view
and tweak it.
* Provide the means for routers to reject tunnel requests with a wider
range of responses:
probabalistic rejection, due to approaching overload
transient rejection, due to temporary overload
bandwidth rejection, due to persistent bandwidth overload
critical rejection, due to general router fault (or imminent shutdown)
The different responses are factored into the profiles accordingly.
* Replaced the old I2CP tunnel related options (tunnels.depthInbound, etc)
with a series of new properties, relevent to the new tunnel routing code:
inbound.nickname (used on the console)
inbound.quantity (# of tunnels to use in any leaseSets)
inbound.backupQuantity (# of tunnels to keep in the ready)
inbound.length (# of remote peers in the tunnel)
inbound.lengthVariance (if > 0, permute the length by adding a random #
up to the variance. if < 0, permute the length
by adding or subtracting a random # up to the
variance)
outbound.* (same as the inbound, except for the, uh, outbound tunnels
in that client's pool)
There are other options, and more will be added later, but the above are
the most relevent ones.
* Replaced Jetty 4.2.21 with Jetty 5.1.2
* Compress all profile data on disk.
* Adjust the reseeding functionality to work even when the JVM's http proxy
is set.
* Enable a poor-man's interactive-flow in the streaming lib by choking the
max window size.
* Reduced the default streaming lib max message size to 16KB (though still
configurable by the user), also doubling the default maximum window
size.
* Replaced the RouterIdentity in a Lease with its SHA256 hash.
* Reduced the overall I2NP message checksum from a full 32 byte SHA256 to
the first byte of the SHA256.
* Added a new "netId" flag to let routers drop references to other routers
who we won't be able to talk to.
* Extended the timestamper to get a second (or third) opinion whenever it
wants to actually adjust the clock offset.
* Replaced that kludge of a timestamp I2NP message with a full blown
DateMessage.
* Substantial memory optimizations within the router and the SDK to reduce
GC churn. Client apps and the streaming libs have not been tuned,
however.
* More bugfixes thank you can shake a stick at.
2005-02-13 jrandom
* Updated jbigi source to handle 64bit CPUs. The bundled jbigi.jar still
only contains 32bit versions, so build your own, placing libjbigi.so in
your install dir if necessary. (thanks mule!)
* Added support for libjbigi-$os-athlon64 to NativeBigInteger and CPUID
(thanks spaetz!)
* Added a couple of scripts, i2ptest.sh and i2pbench.sh, to manage the core
tests and benchmarks.
* Routerconsole now builds under gcj 3.4.3.
* Corrected divide by zero error in TunnelId class under gcj (jrandom++).
* Updated jbigi build scripts for OSX.
2005-01-21 jrandom
* Added support for OSX to the NativeBigInteger code so that it will look
in the classpath for libjbigi-osx-none.jnilib. At the moment, that file
is not bundled with the shipped jbigi.jar yet though.
* Handle unexpected network read errors more carefully (thanks parg!)
* Added more methods to partially compare (DataHelper) and display
arrays (Base64.encode).
* Exposed the AES encryptBlock/decryptBlock on the context.aes()
* Be more generous on the throttle when just starting up the router
* Fix a missing scheduled event in the streaming lib (caused after reset)
* Add a new DisconnectListener on the I2PSocketManager to allow
notification of session destruction.
* Make sure our own router identity is valid, and if it isn't, build a new
one and restart the router. Alternately, you can run the Router with
the single command line argument "rebuild" and it will do the same.
* Cleaned up the resending and choking algorithm in the streaming lib.
* Removed the read timeout override for I2PTunnel's httpclient, allowing
it to use the default for the streaming lib.
* Revised ack triggers in the streaming lib.
* Logging.
* Cleaned up the postinstall/startup scripts a bit more to handle winME,
and added windows info to the headless docs. (thanks ardvark!)
* Fixed a harmless (yet NPE inspiring) race during the final shutdown of
a stream (thanks frosk!)
* Add a pair of new stats for monitoring tunnel participation -
tunnel.participatingBytesProcessed (total # bytes transferred) and
tunnel.participatingBytesProcessedActive (total # bytes transferred for
tunnels whose byte count exceed the 10m average). This should help
further monitor congestion issues.
* Made the NamingService factory property public (thanks susi!)
* Added a new i2ptunnel type: 'httpserver', allowing you to specify what
hostname should be sent to the webserver. By default, new installs will
have an httpserver pointing at their jetty instance with the spoofed
name 'mysite.i2p' (editable on the /i2ptunnel/edit.jsp page).
* Reenable the probabalistic drop on the TCP queues to deal with good old
fashioned bandwidth limiting. However, by default the probability is
rigged to reserve 0% of the queue free - meaning we just aggressively
fail messages in the queue if we're transferring too slowly. That
reservation factor can be increased with 'tcp.queueFreeFactor=0.25'
(or whatever) and the drop code can be disabled with the parameter
'tcp.dropProbabalistically=false'.
* Still penalize a peer on tunnel failure, but don't immediately drop
their capacity to 0.
* More aggressively ACK duplicates
* Randomize the timestamper period
* Display the clock skew on the connection logs when a peer sends it.
* Allow the timestamper to fix skews of up to 10 minutes
* Logging
* Revised the buffering when reading from the SAM client and writing
to the stream. Also added a thread (sigh) so we don't block the
SAM client from giving us more messages for abnormally long periods
of time.
* Display the router version in the logs on startup (oft requested)
* Fix a race during the closing of a messageOutputStream
* Default the I2CP listener to localhost only, unless overridden by
i2cp.tcp.bindAllInterfaces=true (thanks dm!)
* More SAM fixes for things recently broken (whee)
* Toss in a small pool of threads (3) to execute the events queued up with
the SimpleTimer, as we do currently see the occational event
notification spiking up to a second or so.
* Implement a SAM client API in java, useful for event based streaming (or
for testing the SAM bridge)
* Added support to shut down the SAM bridge on OOM (useful if the SAM
bridge is being run outside of the router).
* Include the SAM test code in the sam.jar
* Remove an irrelevent warning message from SAM, which was caused by
perfectly normal operation due to a session being closed.
* Removed some unnecessary synchronization in the streaming lib's
PacketQueue
* More quickly clean up the memory used by the streaming lib by
immediately killing each packet's resend job as soon as it is ACKed (or
cancelled), so that there are no longer any valid pointers to the
(potentially 32KB) packet.
* Fixed the timestamps dumped to stdout when debugging the PacketHandler.
* Drop packets that would expand our inbound window beyond our maximum
buffer size (default 32 messages)
* Always read the ACK/NACK data from the verified packets received, even
if we are going to drop them
* Always adjust the window when there are messages ACKed, though do not
change its size except as before.
* Streamlined some synchronization in the router's I2CP handling
* Streamlined some memory allocation in the SAM bridge
* Default the streaming lib to disconnect on inactivity, rather than send
an empty message.
this still doesnt get the BT to where it needs to be, or fix the timeout problem,
but i dont like having so many commits outstanding and these updates are sound
* Render the burst rate fields on /config.jsp properly (thanks ugha!)
* Build in a simple timeout to flush data queued into the I2PSocket but
not yet flushed.
* Don't explicitly flush after each SAM stream write, but leave it up to
the [nonblocking] passive flush.
* Don't whine about 10-99 connection events occurring in a second
* Don't wait for completion of packets that will not be ACKed (duh)
* Adjust the congestion window, even if the packet was resent (duh)
* Make sure to wake up any blocking read()'s when the MessageInputStream
is close()ed (duh)
* Never wait more than the disconnect timeout for a write to complete
* Fix for a fast loop caused by a race in the new streaming library (thanks
DrWoo, frontier, pwk_, and thetower!)
* Minor updates to the SimpleTimer and Connection to help track down a
high CPU usage problem (dumping debug info to stdout/wrapper.log if too
many events/tasks fire in a second)
* Minor fixes for races on client disconnects (causing NPEs)
* 2004-11-26 0.4.2 released
2004-11-26 jrandom
* Enable the new streaming lib as the default. That means, for any
substantial definition, it is NOT BACKWARDS COMPATIBLE.
* Revised the installer to include start menu and desktop shortcuts for
windows platforms, including pretty icons (thanks DrWoo!)
* Allow clients specified in clients.config to have an explicit startup
delay.
* Update the default install to launch a browser pointing at the console
whenever I2P starts up, rather than only the first time it starts up
(configurable on /configservice.jsp, or in clients.config)
* Bugfix to the clock skew checking code to monitor the delta between
offsets, not the offset itself (duh)
* Router console html update
* New (and uuuuugly) code to verify that the wrapper.config contains
the necessary classpath entries on update. If it has to update the
wrapper.config, it will stop the JVM and service completely, since the
java service wrapper doesn't reread the wrapper.config on JVM restart -
requiring the user to manually restart the service after an update.
* Increase the TCP connection timeout to 30s (which is obscenely long)
------------------------------------------------
* Only allow small clock skews after the first 10 minutes of operation
(to prevent later network lag bouncing us way off course - yes, we
really need an NTP impl to balance out the network burps...)
* Revamp the I2PTunnel web interface startup process so that everything
is shown immediately, so that different pieces hanging don't hang
the rest, and other minor bugfixes.
* Take note of SAM startup error (in case you're already running a SAM
bridge...)
* Increase the bandwidth limiter burst values available to 10-60s (or
whatever is placed in /configadvanced.jsp, of course)
* Allow end of line comments in the hosts.txt and other config files,
using '#' to begin the comments (thanks susi!)
* Add support to I2PTunnel's 'client' feature for picking between multiple
target destinations (e.g. 'client 6668 irc.duck.i2p,irc.baffled.i2p')
* Add a quick link on the left hand nav to reseed if there aren't enough
known peers, as well as link to the config page if there are no active
peers. Revised config page accordingly.
* Destroy ElGamal/AES+SessionTag keys after 15 minutes of inactivity
rather that every 15 minutes, and increase the warning period in which
we refresh tags from 30s to 2 minutes.
* Bugfix for a rare problem closing an I2PTunnel stream where we'd fail
to close the I2PSocket (leaving it to timeout).
* Fix a long standing leak in I2PTunnel (hanging on to i2psocket objects)
* Fix a leak injected into the SimpleTimer
* Fix a race condition in the tunnel message handling
* Added throttles on how many I2PTunnel client connections we open at once
* Replaced some buffered streams in I2PTunnel with unbuffered streams, as
the streaming library used should take care of any buffering.
* Added a cache for some objects used in I2PTunnel, especially useful when
there are many short lived connections.
* Trimmed the SimpleTimer's processing a bit
* Added throttles on how many I2PTunnel client connections we open at once
* Replaced some buffered streams in I2PTunnel with unbuffered streams, as
the streaming library used should take care of any buffering.
* Added a cache for some objects used in I2PTunnel, especially useful when
there are many short lived connections.
* Trimmed the SimpleTimer's processing a bit
* Expose a drop down on the /configclients.jsp to enter the outbound
tunnel depth.
* Improved *hosts.txt loading
* Explicitly override the JVM's timezone settings to use GMT so that
any client applications which use timezones won't leak sensitive
data (thanks gott!)
* Bundle sam.jar in the update (thanks duck!)
* Bugfixes and unit tests for the SAM bridge to handle quoted message
parameters, verify proper operation after multiple session lifetimes,
as well as some synchronization problems.
* New properties method on the DataHelper class.
* Address a race on fast disconnecting clients
* Bugfixes and unit tests for the SAM bridge to handle quoted message
parameters, verify proper operation after multiple session lifetimes,
as well as some synchronization problems.
* New properties method on the DataHelper class.
* Address a race on fast disconnecting clients
* Fixed up the configuration overrides for the streaming socket lib
integration so that it properly honors env settings.
* More memory usage streamlining (last major revamp for now, i promise)
* Increase the tunnel test timeout rapidly if our tunnels are failing.
* Honor message expirations for some tunnel jobs that were prematurely
expired.
* Streamline memory usage with temporary object caches and more efficient
serialization for SHA256 calculation, logging, and both I2CP and I2NP
message handling.
* Fix some situations where we forward messages too eagerly. For a
request at the tunnel endpoint, if the tunnel is inbound and the target
is remote, honor the message by tunnel routing the data rather than
sending it directly to the requested location.
2004-10-30 jrandom
* Cache the temporary objects used in the AES encryption/decryption
process so that AES doesn't require any memory allocation to process
data.
* Dramatically reduce memory usage within various crypto implementations
by avoiding unnecessary (though simplifying) buffers.
* If we specify some tags to be sent in an I2CP message explicitly, use
only those, not those plus a new set (otherwise we aren't sure on ACK
which set was delivered)
* Allow configuration for the partial send timeout (how long before
resending a message down a different tunnel in a lease). This can be
updated with the "router.clientPartialSendTimeout" router config prop.
* Logging
