* Run the peer profile coalescing/reorganization outside the job queue
(on one of the timers), to cut down on some job queue congestion. Also,
trim old profiles while running, not just when starting up.
* Slightly more sane intra-floodfill-node netDb activity (only flood new
entries)
* Workaround in the I2PTunnelHTTPServer for some bad requests (though the
source of the bug is not yet addressed)
* Better I2PSnark reconnection handling
* Further cleanup in the new tunnel build process
* Make sure we expire old participants properly
* Remove much of the transient overload throttling (it wasn't using a good
metric)
* Add a new Status: line on the router console - "ERR-ClockSkew", in case
the clock is too skewed to do anything useful (check the year and month,
not just the hour and minute).
* Fixed the read/write timeouts in the streaming lib (so that it actually
honors them now)
* Minor I2PSnark cleanups (no read timeout, more careful shutdown and
torrent closing)
* Handle an oddball tunnel creation failure (thanks Xunk)
* Create different strategies for exploratory tunnels (which are difficult
to create) and client tunnels (which are much easier)
* Gradually increase number of parallel build attempts as tunnel expiry
nears.
* Temporarily shorten attempted build tunnel length if builds using
configured tunnel length are unsuccessful
* React more aggressively to tunnel failure than routine tunnel
replacement
* Make tunnel creation times randomized - there is existing code to
randomize the tunnels but it isn't effective due to the tunnel creation
strategy. Currently, most tunnels get built all at once, at about 2 1/2
to 3 minutes before expiration. The patch fixes this by fixing the
randomization, and by changing the overlap time (with old tunnels) to a
range of 2 to 4 minutes.
* Reduce number of excess tunnels. Lots of excess tunnels get created due
to overlapping calls. Just about anything generated a call which could
build many tunnels all at once, even if tunnel building was already in
process.
* Miscellaneous router console enhancements
* Inlined the Syndie CSS to reduce the number of HTTP requests (and
because firefox [and others?] delay rendering until they fetch the css).
* Make sure we fire the shutdown tasks when regenerating a new identity
(thanks picsou!)
* Cleaned up some of the things I b0rked in the 'dynamic keys' mode
* Don't drop SSU sessions if they're still transmitting data successfully,
even if there are transmission failures
* Adjusted the time summarization to display hours after 119m, not 90m
* Further EepGet cleanup (grr)
* Added support for 'dynamic keys' mode, where the router creates a new
router identity whenever it detects a substantial change in its public
address (read: SSU IP or port). This only offers minimal additional
protection against trivial attackers, but should provide functional
improvement for people who have periodic IP changes, since their new
router address would not be shitlisted while their old one would be.
* Added further infrastructure for restricted route operation, but its use
is not recommended.
* Add filtering threads by author to Syndie, populated with authors in the
user's addressbook
* When creating the default user, add
"http://syndiemedia.i2p/archive/archive.txt" to their addressbook,
configured to automatically pull updates. (what other archives should
be included?)
* Tiny servlet to help dole out the new routerconsole themes, and bundle
the installer/resources/themes/** into ./docs/themes/** on both install
and update.
* Include SSU establishment failure in the peer profile as a commError,
as we do for TCP establishment failures.
* Don't throttle the initial transmission of a message because of ongoing
retransmissions to a peer, since the initial transmission of a message
is more valuable than a retransmission (since it has less latency).
* Cleaned up links to SusiDNS and I2PTunnel (thanks zzz!)
* Merge sucker into syndie with a rssimport.jsp page.
* Add getContentType() to EepGet.
* Make chunked transfer work (better) with EepGet.
* Do replaceAll("<","<") for logs.
* Improved the bandwidth throtting on tunnel participation, especially for
low bandwidth peers.
* Improved failure handling in SSU with proactive reestablishment of
failing idle peers, and rather than shitlisting a peer who failed too
much, drop the SSU session and allow a new attempt (which, if it fails,
will cause a shitlisting)
* Clarify the cause of the shitlist on the profiles page, and include
bandwidth limiter info at the bottom of the peers page.
* Bugfix for the auto-update code to handle different usage patterns
* Decreased the addressbook recheck frequency to once every 12 hours
instead of hourly.
* Handle dynamically changing the HMAC size (again, unless your nym is
toad or jrandom, ignore this ;)
* Cleaned up some synchronization/locking code
2005-10-07 jrandom
* Include the 1 second bandwidth usage on the console rather than the
1 minute rate, as the 1 second value doesn't have the 1m/5m quantization
issues.
* Support noreseed.i2p in addition to .i2pnoreseed for disabling automatic
reseeding - useful on OSes that make it hard to create dot files.
Thanks Complication (and anon)!
* Fixed the installer version string (thanks Frontier!)
* Added cleaner rejection of invalid IP addresses, shitlist those who send
us invalid IP addresses, verify again that we are not sending invalid IP
addresses, and log an error if it happens. (Thanks Complication, ptm,
and adab!)
2005-09-29 jrandom
* Let syndie users modify their metadata.
* Reseed the router on startup if there aren't enough peer references
known locally. This can be disabled by creating the file .i2pnoreseed
in your home directory, and the existing detection and reseed handling
on the web interface is unchanged.
* Reworded the SSU introductions config section (thanks duck!)
* Force identity content encoding for I2PTunnel httpserver requests
(thanks redzara!)
* Further x-i2p-gzip bugfixes for the end of streams
* Reduce the minimum bandwidth limits to 3KBps steady and burst (though
I2P's performance at 3KBps is another issue)
* Cleaned up some streaming lib structures
* Allow reseeding on the console if the netDb knows less than 30 peers,
rather than less than 10 (without internet connectivity, we keep the
last 15 router references)
* Reenable the x-i2p-gzip HTTP processing by default, flushing the stream
more aggressively.
* Show the status that used to be called "ERR-Reject" as "OK (NAT)"
* Reduced the default maximum number of streaming lib resends of a packet
(10 retransmits is a bit much with a reasonable RTO)
2005-09-17 jrandom
* Clean up syndie a bit more and bundle a default introductory post with
both new installs and updates.
* Typo fixes on the console (thanks bar!)
* Updated the bandwidth limiter to use two tiers of bandwidth - our normal
steady state rate, plus a new limit on how fast we transfer when
bursting. This is different from the old "burst as fast as possible
until we're out of tokens" policy, and should help those with congested
networks. See /config.jsp to manage this rate.
* Bugfixes in Syndie to handle missing cache files (no data was lost, the
old posts just didn't show up).
* Log properly in EepPost
* Added the i2p.exe and i2pinstall.exe for windows users, using launch4j.
* Added runplain.sh for *nix/osx users having problems using the java
service wrapper (called from the install dir as: sh runplain.sh)
* Bundle susidns and syndie, with links on the top nav
* Have I2PTunnelHTTPClient and I2PTunnelHTTPServer use the x-i2p-gzip
content-encoding (if offered), reducing the payload size before it
reaches the streaming lib. The existing compression is at the i2cp
level, so we've been packetizing 4KB of uncompressed data and then
compressing those messages, rather than compressing and then packetizing
4KB of compressed data. This should reduce the number of round trips
to fetch web pages substantially.
* Adjust the startup and timing of the addressbook so that susidns always
has config to work off, and expose a method for susidns to tell it to
reload its config and rerun.
* More careful error handling with introductions (thanks dust!)
* Fix the forceIntroducers checkbox on config.jsp (thanks Complication!)
* Hide the shitlist on the summary so it doesn't confuse new users.
* More aggressively publish updated routerInfo.
* Expose the flag to force SSU introductions on the router console
* Don't give people the option to disable SNTP time sync, at least not
through the router console, because there is no reason to disable it.
No, not even if your OS is "ntp synced", because chances are, its not.
* Test the router's reachability earlier and more aggressively
* Use the low level bandwidth limiter's rates for the router console, and
if the router has net.i2p.router.transport.FIFOBandwidthLimiter=INFO in
the logger config, keep track of the 1 second transfer rates as the stat
'bw.sendBps1s' and 'bw.recvBps1s', allowing closer monitoring of burst
behavior.
* HTML cleanup for the router console (thanks!)
2005-09-07 jrandom
* Lay the foundation for 'client routers' - the ability for peers to opt
out of participating in tunnels entirely due to firewall/NAT issues.
Individual routers have control over where those peers are used in
tunnels - in outbound or inbound, exploratory or client tunnels, or
none at all. The defaults with this build are to simply act as before -
placing everyone as potential participants in any tunnel.
* Another part of the foundation includes the option for netDb
participants to refuse to answer queries regarding peers who are marked
as unreachable, though this too is disabled by default (meaning the
routerInfo is retrievable from the netDb).
* Expose the HTTP headers to EepGet status listeners
* Handle DSA key failures properly (if the signature is not invertable, it
is obviously invalid)
also, syndie now properly detects whether the remote archive can send a filtered export.zip
by examining the HTTP headers for X-Syndie-Export-Capable: true. If the remote archive
does not set that header (and neither freesites, nor apache or anything other than the ArchiveServlet will),
it uses individual HTTP requests for individual blog posts and metadata fetches.
* Minor logging and optimization tweaks in the router and SDK
* Use ISO-8859-1 in the XML files (thanks redzara!)
* The consolePassword config property can now be used to bypass the router
console's nonce checking, allowing CLI restarts
* Deployed the peer testing implementation to be run every few minutes on
each router, as well as any time the user requests a test manually. The
tests do not reconfigure the ports at the moment, merely determine under
what conditions the local router is reachable. The status shown in the
top left will be "ERR-SymmetricNAT" if the user's IP and port show up
differently for different peers, "ERR-Reject" if the router cannot
receive unsolicited packets or the peer helping test could not find a
collaborator, "Unknown" if the test has not been run or the test
participants were unreachable, or "OK" if the router can receive
unsolicited connections and those connections use the same IP and port.
* Display the average clock skew for both SSU and TCP connections
2005-08-07 jrandom
* Fixed the long standing streaming lib bug where we could lose the first
packet on retransmission.
* Avoid an NPE when a message expires on the SSU queue.
* Adjust the streaming lib's window growth factor with an additional
Vegas-esque congestion detection algorithm.
* Removed an unnecessary SSU session drop
* Reduced the MTU (until we get a working PMTU lib)
* Deferr tunnel acceptance until we know how to reach the next hop,
rejecting it if we can't find them in time.
* If our netDb store of our leaseSet fails, give it a few seconds before
republishing.
2005-07-27 jrandom
* Enabled SSU as the default top priority transport, adjusting the
config.jsp page accordingly.
* Add verification fields to the SSU and TCP connection negotiation (not
compatible with previous builds)
* Enable the backwards incompatible tunnel crypto change as documented in
tunnel-alt.html (have each hop encrypt the received IV before using it,
then encrypt it again before sending it on)
* Disable the I2CP encryption, leaving in place the end to end garlic
encryption (another backwards incompatible change)
* Adjust the protocol versions on the TCP and SSU transports so that they
won't talk to older routers.
* Fix up the config stats handling again
* Fix a rare off-by-one in the SSU fragmentation
* Reduce some unnecessary netDb resending by inluding the peers queried
successfully in the store redundancy count.
* Fix in the SDK for a bug which would manifest itself as misrouted
streaming packets when a destination has many concurrent streaming
connections (thanks duck!)
* No more "Graceful shutdown in -18140121441141s"
* Added workaround for an odd win32 bug in the stats configuration
console page which meant only the first checkbox selection was saved.
2005-07-15 Romster
* Added per group selection toggles in the stats configuration console
page.
* Within the tunnel, use xor(IV, msg[0:16]) as the flag to detect dups,
rather than the IV by itself, preventing an attack that would let
colluding internal adversaries tag a message to determine that they are
in the same tunnel. Thanks dvorak for the catch!
* Drop long inactive profiles on startup and shutdown
* /configstats.jsp: web interface to pick what stats to log
* Deliver more session tags to account for wider window sizes
* Cache some intermediate values in our HMACSHA256 and BC's HMAC
* Track the client send rate (stream.sendBps and client.sendBpsRaw)
* UrlLauncher: adjust the browser selection order
* I2PAppContext: hooks for dummy HMACSHA256 and a weak PRNG
* StreamSinkClient: add support for sending an unlimited amount of data
* Migrate the tests out of the default build jars
2005-06-22 Comwiz
* Migrate the core tests to junit
* Added a small new page to the web console (/peers.jsp) which contains
the peer connection information. This will be cleaned up a lot more
before 0.6 is out, but its a start.
* Added button to router console for manual update checks.
* Fixed bug in configupdate.jsp that caused the proxy port to be updated
every time the form was submitted even if it hadn't changed.
* Make sure we don't get cached updates (thanks smeghead!)
* Clear out the callback for the TestJob after it passes (only affects the
job timing accounting)
* Security improvements to TrustedUpdate: signing and verification of the
version string along with the data payload for signed update files
(consequently the positions of the DSA signature and version string fields
have been swapped in the spec for the update file's header); router will
no longer perform a trusted update if the signed update's version is lower
than or equal to the currently running router's version.
* Added two new CLI commands to TrustedUpdate: showversion, verifyupdate.
* Extended TrustedUpdate public API for use by third party applications.
* After a successfull netDb search for a leaseSet, republish it to all of
the peers we have tried so far who did not give us the key (up to 10),
rather than the old K closest (which may include peers who had given us
the key)
* Don't wait 5 minutes to publish a leaseSet (duh!), and rather than
republish it every 5 minutes, republish it every 3. In addition, always
republish as soon as the leaseSet changes (duh^2).
* Minor fix for oddball startup race (thanks travis_bickle!)
* Minor AES update to allow in-place decryption.
2005-03-29 jrandom
* Decreased the initial RTT estimate to 10s to allow more retries.
* Increased the default netDb store replication factor from 2 to 6 to take
into consideration tunnel failures.
* Address some statistical anonymity attacks against the netDb that could
be mounted by an active internal adversary by only answering lookups for
leaseSets we received through an unsolicited store.
* Don't throttle lookup responses (we throttle enough elsewhere)
* Fix the NewsFetcher so that it doesn't incorrectly resume midway through
the file (thanks nickster!)
* Updated the I2PTunnel HTML (thanks postman!)
* Added support to the I2PTunnel pages for the URL parameter "passphrase",
which, if matched against the router.config "i2ptunnel.passphrase" value,
skips the nonce check. If the config prop doesn't exist or is blank, no
passphrase is accepted.
* Implemented HMAC-SHA256.
* Enable the tunnel batching with a 500ms delay by default
* Dropped compatability with 0.5.0.3 and earlier releases
