* Bugfix to the I2PTunnel web config to properly accept i2cp port settings
* Initial sucker refactoring to simplify reuse of the html parsing
* Beginnings of hooks to push imported rss/atom out to remote syndie
archives automatically (though not enabled currently)
* Further SSU peer test cleanup
* Bugfix to the I2PTunnel web config to properly accept i2cp port settings
* Initial sucker refactoring to simplify reuse of the html parsing
* Beginnings of hooks to push imported rss/atom out to remote syndie
archives automatically (though not enabled currently)
* Further SSU peer test cleanup
* Add in per-blog RSS feeds to Syndie
* Upgraded sucker's ROME dependency to 0.8, bundling sucked enclosures
with the posts, marking additional attachments as Media RSS enclosures
(http://search.yahoo.com/mrss/), since RSS only supports one enclosure
per item.
* Don't allow the default syndie user to be set to something invalid if
its in single user mode.
* Run the peer profile coalescing/reorganization outside the job queue
(on one of the timers), to cut down on some job queue congestion. Also,
trim old profiles while running, not just when starting up.
* Slightly more sane intra-floodfill-node netDb activity (only flood new
entries)
* Workaround in the I2PTunnelHTTPServer for some bad requests (though the
source of the bug is not yet addressed)
* Better I2PSnark reconnection handling
* Further cleanup in the new tunnel build process
* Make sure we expire old participants properly
* Remove much of the transient overload throttling (it wasn't using a good
metric)
* New tunnel build process - does not use the new crypto or new peer
selection strategies. However, it does drop the fallback tunnel
procedure, except for tunnels who are configured to allow them, or for
the exploratory pool during bootstrapping or after a catastrophic
failure. This new process prefers to fail rather than use too-short
tunnels, so while it can do some pretty aggressive tunnel rebuilding,
it may expose more tunnel failures to the user.
* Always prefer normal tunnels to fallback tunnels.
* Potential fix for a bug while changing i2cp settings on I2PSnark (thanks
bar!)
* Do all of the netDb entry writing in a separate thread, avoiding
duplicates and batching them up.
* Add title attributes to all external links in Syndie, so we can rollover
and quickly see if it's worth clicking on.
* Fixed a minor compiler warning.
* First pass of the new tunnel creation crypto, specified in the new
router/doc/tunnel-alt-creation.html (referenced in the current
router/doc/tunnel-alt.html). It isn't actually used anywhere yet, other
than in the test code, but the code verifies the technical viability, so
further scrutiny would be warranted.
* Only create the loadtest.log if requested to do so (thanks zzz!)
* Make sure we cleanly take into consideration the appropriate data
points when filtering out duplicate messages in the message validator,
and report the right bloom filter false positives rate (not used for
anything except debugging)
* Syndie CSS tweaks to removed some redundant declarations, improve font
scaling and layout robustness. Improved cross browser compatibility
(in other words "kicked IE"). Tightened the look of the blog template
a little.
* Include the attachments/blogs/etc for comments on the blog view
* Syndie HTML fixes (thanks cervantes!)
* Make sure we fully reset the objects going into our cache before we
reuse them (thanks zzz!)
* Added the per-post list of attachments/blogs/etc to the blog view in
Syndie (though this does not yet include comments or some further
refinements)
* Have the I2P shortcut launch i2p.exe instead of i2psvc.exe on windows,
removing the dox box (though also removes the restart functionality...)
* Give the i2p.exe the correct java.library.path to support the systray
dll (thanks Bobcat, Sugadude, anon!)
* Removed a longstanding bug that had caused unnecessary router identity
churn due to clock skew
* Temporarily sanity check within the streaming lib for long pending
writes
* Added support for a blog-wide logo to Syndie, and automated the pushing
of updated extended blog info data along side the metadata.
* Removed a longstanding bug that had caused unnecessary router identity
churn due to clock skew
* Temporarily sanity check within the streaming lib for long pending
writes
* Added support for a blog-wide logo to Syndie, and automated the pushing
of updated extended blog info data along side the metadata.
* Rather than profile individual tunnels for throughput over their
lifetime, do so at 1 minute intervals (allowing less frequently active
tunnels to be more fairly measured).
* Run the live tunnel load test across two tunnels at a time, by default.
The load test runs for a random period from 90s to the tunnel lifetime,
self paced. This should help gathering data for profiling peers that
are in exploratory tunnels.
2006-01-03 jrandom
* Calculate the overall peer throughput across the 3 fastest one minute
tunnel throughput values, rather than the single fastest throughput.
* Degrade the profiled throughput data over time (cutting the profiled
peaks in half once a day, on average)
* Enable yet another new speed calculation for profiling peers, using the
peak throughput from individual tunnels that a peer is participating in,
rather than across all tunnels they are participating in. This helps
gather a fairer peer throughput measurement, since it won't allow a slow
high capacity peer seem to have a higher throughput (pushing a little
data across many tunnels at once, as opposed to lots of data across a
single tunnel). This degrades over time like the other.
* Add basic OS/2 support to the jbigi code (though we do not bundle a
precompiled OS/2 library)
* Disable multifile torrent creation in I2PSnark's web UI for the moment
(though it can still seed and participate in multifile swarms)
* Enable a new speed calculation for profiling peers, using their peak
1 minute average tunnel throughput as their speed.
* Include a simple torrent creator in the I2PSnark web UI
* Further streaming lib closing improvements
* Refactored the load test components to run off live tunnels (though,
still not safe for normal/anonymous load testing)
* Add a new Status: line on the router console - "ERR-ClockSkew", in case
the clock is too skewed to do anything useful (check the year and month,
not just the hour and minute).
* Fixed the read/write timeouts in the streaming lib (so that it actually
honors them now)
* Minor I2PSnark cleanups (no read timeout, more careful shutdown and
torrent closing)
* Handle an oddball tunnel creation failure (thanks Xunk)
2005-12-22 jrandom
* Bundle the standalone I2PSnark launcher in the installer and update
process (launch as "java -jar launch-i2psnark.jar", viewing the
interface on http://localhost:8002/)
* Don't autostart swarming torrents by default so that you can run a
standalone I2PSnark from the I2P install dir and not have the embedded
I2PSnark autolaunch the torrents that the standalone instance is running
* Fixed a rare streaming lib bug that could let a blocking call wait
forever.
* Fix for old Syndie blog bookmarks (thanks Complication!)
* Fix for I2PSnark to accept incoming connections again (oops)
* Randomize the order that peers from the tracker are contacted
* I2PSnark logging, disconnect old inactive peers rather than new ones,
memory usage reduction, better OOM handling, and a shared connection
acceptor.
* Cleaned up the Syndie blog page and the resulting filters (viewing a
blog from the blog page shows threads started by the selected author,
not those that they merely participate in)
* Added some I2PSnark sanity checks, an OOMListener when running
standalone, and a guard against keeping memory tied up indefinitely.
* Sanity check on the watchdog (thanks zzz!)
* Handle invalid HTTP requests in I2PTunnel a little better
* Fix to drop peer references when we shitlist people again (thanks zzz!)
* Further I2PSnark fixes to deal with arbitrary torrent info attributes
(thanks Complication!)
* Don't test tunnels expiring within 90 seconds
* Defer Test Tunnel jobs if job lag too large
* Use JobQueue.getMaxLag() rather than the jobQueue.jobLag stat to measure
job lag for tunnel build backoff, allowing for more agile handling
(since the stat is only updated once a minute)
* Use tunnel length override if all tunnels are expiring within one
minute.
* Create different strategies for exploratory tunnels (which are difficult
to create) and client tunnels (which are much easier)
* Gradually increase number of parallel build attempts as tunnel expiry
nears.
* Temporarily shorten attempted build tunnel length if builds using
configured tunnel length are unsuccessful
* React more aggressively to tunnel failure than routine tunnel
replacement
* Make tunnel creation times randomized - there is existing code to
randomize the tunnels but it isn't effective due to the tunnel creation
strategy. Currently, most tunnels get built all at once, at about 2 1/2
to 3 minutes before expiration. The patch fixes this by fixing the
randomization, and by changing the overlap time (with old tunnels) to a
range of 2 to 4 minutes.
* Reduce number of excess tunnels. Lots of excess tunnels get created due
to overlapping calls. Just about anything generated a call which could
build many tunnels all at once, even if tunnel building was already in
process.
* Miscellaneous router console enhancements
* Don't let the TCP transport alone shitlist a peer, since other
transports may be working. Also display whether TCP connections are
inbound or outbound on the peers page.
* Fixed some substantial bugs in the SSU introducers where we wouldn't
talk to anyone who didn't expose an IP (even if they had introducers),
among other goofy things.
* When dealing with SSU introducers, send them all a packet at 3s/6s/9s,
rather than sending one a packet at 3s, then another a packet at 6s,
and a third a packet at 9s.
* Fixed Syndie attachments (oops)
* Further Syndie UI cleanup
* Bundled our patched MultiPartRequest code from jetty (APL2 licensed),
since it hasn't been applied to the jetty CVS yet [1]. Its packaged
into syndie.jar and renamed to net.i2p.syndie.web.MultiPartRequest, but
will be removed as soon as its integrated into Jetty. This patch allows
posting content in various character sets.
[1] http://article.gmane.org/gmane.comp.java.jetty.general/6031
* Upgraded new installs to the latest stable jetty (5.1.6), though this
isn't pushed as part of the update yet, as there aren't any critical
bugs.
* Inlined the Syndie CSS to reduce the number of HTTP requests (and
because firefox [and others?] delay rendering until they fetch the css).
* Make sure we fire the shutdown tasks when regenerating a new identity
(thanks picsou!)
* Cleaned up some of the things I b0rked in the 'dynamic keys' mode
* Don't drop SSU sessions if they're still transmitting data successfully,
even if there are transmission failures
* Adjusted the time summarization to display hours after 119m, not 90m
* Further EepGet cleanup (grr)
* Update the sorting in Syndie to consider children 'newer' than parents,
even if they have the same message ID (duh)
* Cleaned up some nav links in Syndie (good idea gloin, spaetz!)
* Added a bunch of tooltips to Syndie's fields (thanks polecat!)
* Force support for nonvalidating XML in Jetty (so we can handle GCJ/etc
better)
* Be more explicit about what messages we will handle through a client
tunnel, and how we will handle them. This cuts off a set of attacks
that an active adversary could mount, though they're probably nonobvious
and would require at least some sophistication.
* Added support for 'dynamic keys' mode, where the router creates a new
router identity whenever it detects a substantial change in its public
address (read: SSU IP or port). This only offers minimal additional
protection against trivial attackers, but should provide functional
improvement for people who have periodic IP changes, since their new
router address would not be shitlisted while their old one would be.
* Added further infrastructure for restricted route operation, but its use
is not recommended.