* Deployed the peer testing implementation to be run every few minutes on
each router, as well as any time the user requests a test manually. The
tests do not reconfigure the ports at the moment, merely determine under
what conditions the local router is reachable. The status shown in the
top left will be "ERR-SymmetricNAT" if the user's IP and port show up
differently for different peers, "ERR-Reject" if the router cannot
receive unsolicited packets or the peer helping test could not find a
collaborator, "Unknown" if the test has not been run or the test
participants were unreachable, or "OK" if the router can receive
unsolicited connections and those connections use the same IP and port.
* Add a configurable throttle to the number of concurrent outbound SSU
connection negotiations (via i2np.udp.maxConcurrentEstablish=4). This
may help those with slow connections to get integrated at the start.
* Further fixlets to the streaming lib
* Display the average clock skew for both SSU and TCP connections
2005-08-07 jrandom
* Fixed the long standing streaming lib bug where we could lose the first
packet on retransmission.
* Avoid an NPE when a message expires on the SSU queue.
* Adjust the streaming lib's window growth factor with an additional
Vegas-esque congestion detection algorithm.
* Removed an unnecessary SSU session drop
* Reduced the MTU (until we get a working PMTU lib)
* Deferr tunnel acceptance until we know how to reach the next hop,
rejecting it if we can't find them in time.
* If our netDb store of our leaseSet fails, give it a few seconds before
republishing.
* Fix an addressbook NPE when a new hostname from the master addressbook
didn't exist in the router addressbook.
* Fix an addressbook bug which caused subscriptions not to be parsed at
all. (Oops!)
2005-07-27 jrandom
* Enabled SSU as the default top priority transport, adjusting the
config.jsp page accordingly.
* Add verification fields to the SSU and TCP connection negotiation (not
compatible with previous builds)
* Enable the backwards incompatible tunnel crypto change as documented in
tunnel-alt.html (have each hop encrypt the received IV before using it,
then encrypt it again before sending it on)
* Disable the I2CP encryption, leaving in place the end to end garlic
encryption (another backwards incompatible change)
* Adjust the protocol versions on the TCP and SSU transports so that they
won't talk to older routers.
* Fix up the config stats handling again
* Fix a rare off-by-one in the SSU fragmentation
* Reduce some unnecessary netDb resending by inluding the peers queried
successfully in the store redundancy count.
* Fix in the SDK for a bug which would manifest itself as misrouted
streaming packets when a destination has many concurrent streaming
connections (thanks duck!)
* No more "Graceful shutdown in -18140121441141s"
* Further preparation for removing I2CP crypto
* Added some validation to the DH key agreement (thanks $anon)
* Validate tunnel data message expirations (though not really a problem,
since tunnels expire)
* Minor PRNG threading cleanup
* Added workaround for an odd win32 bug in the stats configuration
console page which meant only the first checkbox selection was saved.
2005-07-15 Romster
* Added per group selection toggles in the stats configuration console
page.
* Reduced the growth factor on the slow start and congestion avoidance for
the streaming lib.
* Adjusted some of the I2PTunnelServer threading to use a small pool of
handlers, rather than launching off new threads which then immediately
launch off an I2PTunnelRunner instance (which launches 3 more threads..)
* Don't persist session keys / session tags (not worth it, for now)
* Added some detection and handling code for duplicate session tags being
delivered (root cause still not addressed)
* Make the PRNG's buffer size configurable (via the config property
"i2p.prng.totalBufferSizeKB=4096")
* Disable SSU flooding by default (duh)
* Updates to the StreamSink apps for better throttling tests.
* Within the tunnel, use xor(IV, msg[0:16]) as the flag to detect dups,
rather than the IV by itself, preventing an attack that would let
colluding internal adversaries tag a message to determine that they are
in the same tunnel. Thanks dvorak for the catch!
* Drop long inactive profiles on startup and shutdown
* /configstats.jsp: web interface to pick what stats to log
* Deliver more session tags to account for wider window sizes
* Cache some intermediate values in our HMACSHA256 and BC's HMAC
* Track the client send rate (stream.sendBps and client.sendBpsRaw)
* UrlLauncher: adjust the browser selection order
* I2PAppContext: hooks for dummy HMACSHA256 and a weak PRNG
* StreamSinkClient: add support for sending an unlimited amount of data
* Migrate the tests out of the default build jars
2005-06-22 Comwiz
* Migrate the core tests to junit
* Added a small new page to the web console (/peers.jsp) which contains
the peer connection information. This will be cleaned up a lot more
before 0.6 is out, but its a start.
* Reduced some SimpleTimer churn
* add hooks for per-peer choking in the outbound message queue - if/when a
peer reaches their cwin, no further messages will enter the 'active' pool
until there are more bytes available. other messages waiting (either later
on in the same priority queue, or in the queues for other priorities) may
take that slot.
* when we have a message acked, release the acked size to the congestion
window (duh), rather than waiting for the second to expire and refill the
capacity.
* send packets in a volley explicitly, waiting until we can allocate the full
cwin size for that message
* More fixes for the I2PTunnel "other" interface handling (thanks nelgin!)
* Add back the code to handle bids from multiple transports (though there
is still only one transport enabled by default)
* Adjust the router's queueing of outbound client messages when under
heavy load by running the preparatory job in the client's I2CP handler
thread, thereby blocking additional outbound messages when the router is
hosed.
* No need to validate or persist a netDb entry if we already have it
And for some udp stuff:
* only bid on what we know (duh)
* reduceed the queue size in the UDPSender itself, so that ACKs go
through more quickly, leaving the payload messages to queue up in
the outbound fragment scheduler
* rather than /= 2 on congestion, /= 2/3 (still AIMD, but less drastic)
* adjust the fragment selector so a wsiz throttle won't force extra
volleys
* mark congestion when it occurs, not after the message has been
ACKed
* when doing a round robin over the active messages, move on to the
next after a full volley, not after each packet (causing less "fair"
performance but better latency)
* reduced the lock contention in the inboundMessageFragments by
moving the ack and complete queues to the ACKSender and
MessageReceiver respectively (each of which have their own
threads)
* prefer new and existing UDP sessions to new TCP sessions, but
prefer existing TCP sessions to new UDP sessions
* Added button to router console for manual update checks.
* Fixed bug in configupdate.jsp that caused the proxy port to be updated
every time the form was submitted even if it hadn't changed.
* Added a pool of PRNGs using a different synchronization technique,
hopefully sufficient to work around IBM's PRNG bugs until we get our
own Fortuna.
* In the streaming lib, don't jack up the RTT on NACK, and have the window
size bound the not-yet-ready messages to the peer, not the unacked
message count (not sure yet whether this is worthwile).
* Many additions to the messageHistory log.
* Handle out of order tunnel fragment delivery (not an issue on the live
net with TCP, but critical with UDP).
and for udp stuff:
* implemented tcp-esque rto code in the udp transport
* make sure we don't ACK too many messages at once
* transmit fragments in a simple (nonrandom) order so that we can more easily
adjust timeouts/etc.
* let the active outbound pool grow dynamically if there are outbound slots to
spare
* use a simple decaying bloom filter at the UDP level to drop duplicate resent
packets.
And this is the big "Fix the Parser" patch. It turns the sam_parse function in src/parse.c into something that actually works. Generating the argument list from an incoming SAM thingy is a bit memory churn-y; perhaps when I have time I'll replace all those strdups with structures that simply track the (start,end) indices.
Oh and also I moved i2p-ping to the new system. Which required 0 change in code. All I did was fix the Makefile, and add shared library libtool support. Anyway, so enjoy folks. It's rare I'm this productive
- polecat
* In the SDK, we don't actually need to block when we're sending a message
as BestEffort (and these days, we're always sending BestEffort).
* Pass out client messages in fewer (larger) steps.
* Have the InNetMessagePool short circuit dispatch requests.
* Have the message validator take into account expiration to cut down on
false positives at high transfer rates.
* Allow configuration of the probabalistic window size growth rate in the
streaming lib's slow start and congestion avoidance phases, and default
them to a more conservative value (2), rather than the previous value
(1).
* Reduce the ack delay in the streaming lib to 500ms
* Honor choke requests in the streaming lib (only affects those getting
insanely high transfer rates)
* Let the user specify an interface besides 127.0.0.1 or 0.0.0.0 on the
I2PTunnel client page (thanks maestro^!)
(plus minor udp tweaks)
* Added the possibility for i2ptunnel client and httpclient instances to
have their own i2p session (and hence, destination and tunnels). By
default, tunnels are shared, but that can be changed on the web
interface or with the sharedClient config option in i2ptunnel.config.
2005-04-17 jrandom
* Marked the net.i2p.i2ptunnel.TunnelManager as deprecated. Anyone use
this? If not, I want to drop it (lots of tiny details with lots of
duplicated semantics).
* Added new user-editable eepproxy error page templates.
2005-04-17 jrandom
* Revamp the tunnel building throttles, fixing a situation where the
rebuild may not recover, and defaulting it to unthrottled (users with
slow CPUs may want to set "router.tunnel.shouldThrottle=true" in their
advanced router config)
* Make sure we don't get cached updates (thanks smeghead!)
* Clear out the callback for the TestJob after it passes (only affects the
job timing accounting)
* Security improvements to TrustedUpdate: signing and verification of the
version string along with the data payload for signed update files
(consequently the positions of the DSA signature and version string fields
have been swapped in the spec for the update file's header); router will
no longer perform a trusted update if the signed update's version is lower
than or equal to the currently running router's version.
* Added two new CLI commands to TrustedUpdate: showversion, verifyupdate.
* Extended TrustedUpdate public API for use by third party applications.
* Retry I2PTunnel startup if we are unable to build a socketManager for a
client or httpclient tunnel.
* Add some basic sanity checking on the I2CP settings (thanks duck!)
* After a successfull netDb search for a leaseSet, republish it to all of
the peers we have tried so far who did not give us the key (up to 10),
rather than the old K closest (which may include peers who had given us
the key)
* Don't wait 5 minutes to publish a leaseSet (duh!), and rather than
republish it every 5 minutes, republish it every 3. In addition, always
republish as soon as the leaseSet changes (duh^2).
* Minor fix for oddball startup race (thanks travis_bickle!)
* Minor AES update to allow in-place decryption.
2005-03-29 jrandom
* Decreased the initial RTT estimate to 10s to allow more retries.
* Increased the default netDb store replication factor from 2 to 6 to take
into consideration tunnel failures.
* Address some statistical anonymity attacks against the netDb that could
be mounted by an active internal adversary by only answering lookups for
leaseSets we received through an unsolicited store.
* Don't throttle lookup responses (we throttle enough elsewhere)
* Fix the NewsFetcher so that it doesn't incorrectly resume midway through
the file (thanks nickster!)
* Updated the I2PTunnel HTML (thanks postman!)
* Added support to the I2PTunnel pages for the URL parameter "passphrase",
which, if matched against the router.config "i2ptunnel.passphrase" value,
skips the nonce check. If the config prop doesn't exist or is blank, no
passphrase is accepted.
* Implemented HMAC-SHA256.
* Enable the tunnel batching with a 500ms delay by default
* Dropped compatability with 0.5.0.3 and earlier releases
