i2p.i2p/debian-alt/doc/launchpad.txt

Instructions to upload to launchpad PPA

You must have a GPG key already uploaded to the
usual public key servers, where launchpad can find it.

Prep
----

- Make a launchpad account
- Log into launchpad
- Get your GPG fingerprint (gpg -K --fingerprint)
- Add your GPG fingerprint at the form on
  https://launchpad.net/~/+editpgpkeys
- Wait for the encrypted email response
- Decrypt and click the confirmation link in the email
- Click confirm on the page
- Make a PPA, lets call it 'test'
- OPTIONAL: Go to i2p.packages PPA and copy over existing I2P to your PPA:
  (select "copy existing binaries")
    trusty, vivid, wily, xenial, yakkety, zesty
    not precise (only if building for precise which you probably aren't)
    not utopic (obsolete, disabled by launchpad)
- Go to i2p.packages PPA and copy over service-wrapper-java to your PPA.
  This is required for the build.
  (select "copy existing binaries")
    trusty
    not precise (only if building for precise which you probably aren't)
    not vivid, wily, xenial, yakkety, zesty (more recent versions 3.5.25-2 or 3.5.26-3 are in official launchpad)
    not utopic (obsolete, disabled by launchpad)

- you need the following packages
  sudo apt-get install devscripts dput dh_systemd

- check out clean copy of release:
  mtn co -d i2p.mtn -b i2p.i2p i2p.i2p.foobar -r t:i2p-0.9.xx

Generate files to upload
------------------------

- export TZ=UTC
- cd i2p.i2p.foobar
- copy debian-alt/(series)/changelog to debian/
- edit debian/changelog to add the release at the top
  * version MUST be 0.9.XX-1ubuntu1
    next version for fixes would be 0.9.XX-2ubunutu1
  * series MUST be trusty (or precise)
  * name and email MUST EXACTLY match what's in your GPG keyring
    or the signing will fail.
    (or add -kkeyid argument to debuild, which you must do
     if you want to sign with a subkey)
    run gpg -K to list your private keys
- ant debian-release-tarball (ant precise-release-tarball for precise)
  this will make a directory ../i2p-0.9.XX-0-xxxxxxxx/
  and a tarball ../i2p_0.9.XX.orig.tar.bz2
- cp debian/changelog ../i2p-0.9.XX-0-xxxxxxxx/debian/
- cp debian-alt/(series)/(other files besides changelog) to ../i2p-0.9.XX-0-xxxxxxxx/debian/
- cd ../i2p-0.9.XX-0-xxxxxxxx/
- Note: If building for precise and you are on yakkety or higher without Java 7,
  make a symlink so debuild will work: cd /var/lib/jvm; sudo ln -s java-8-openjdk-amd64/ java-7-openjdk-amd64
- Build the *1ubuntu1* files:
  If you have NOT done a successful dput for this release yet:
    debuild -S -sa -kkeyid
  otherwise, if just fixing up the control files, patches, etc:
    debuild -S -sd -kkeyid
  (note: no space allowed in -kkeyid)
- If patches fail, you must fix them up, either manually or with quilt
  (quilt instructions go here)

- You will now have the following files in ..:
  i2p_0.9.XX-1ubuntu1.debian.tar.xz
  i2p_0.9.XX-1ubuntu1.dsc
  i2p_0.9.XX-1ubuntu1_source.changes
  i2p_0.9.XX-1ubuntu1_source.build
- And from the copy above:
  i2p_0.9.XX.orig.tar.bz2

Upload to launchpad
-------------------

- cd ..
- Upload to launchpad:
  dput ppa:your-lp-id/your-ppa-name i2p_0.9.XX-1ubuntu1_source.changes

This will upload the following files:
  i2p_0.9.XX-1ubuntu1.dsc            (the GPG signature)
  i2p_0.9.XX-1ubuntu1.debian.tar.xz  (basically the debian/ directory tarball)
  i2p_0.9.XX-1ubuntu1_source.changes (the changelog text file)
  i2p_0.9.XX.orig.tar.bz2            (the source tarball)

Note: If you didn't add your GPG fingerprint to your launchpad account
way up there above in step 2 or so, the upload will work,
but you will get no email back, and it will never build or show up on
the pending-build page.

Wait for it to build and be published.
Could be minutes to hours.

The amd64 build produces one deb:
   libjbigi-jni (amd64)
The i386 build produces three debs:
   i2p-doc (arch-independent), i2p-router (arch-independent), and libjbigi-jni (i386)
So the build isn't done until both arch builds are complete.
Don't


If it works, copy trusty the series you are running (e.g. yakkety) in your PPA
so that you can test.
  (select "copy existing binaries")
  Wait a few minutes for that to happen

Test
----

Add your PPA following the instructions at http://i2p-projekt.i2p/en/download/debian:
     sudo apt-add-repository ppa:your-lp-id/your-ppa-name
     sudo apt-get update
     sudo apt-get install i2p
     mv ~/.i2p ~/.i2p-save
     i2prouter start
     (test...)
     stop router
     sudo dpkg-reconfigure i2p
     (reconfigure as a service)
     (i2p should start as a service. test...)


Release
-------

Then copy trusty from your PPA to the i2p-maintainers PPA.
Then in the i2p-maintainers PPA, copy trusty to vivid, xenial, yakkety, zesty
Did a new series open up since the last time you did this? Copy to the new one also.
  (select "copy existing binaries")
  Copy trusty first and wait for it to be published in i2p-maintainers or the others will fail.
For precise, build and copy it separately.


Creating milestone, release, and uploading files
----------------------------------------------

You must first create a milestone, then create a release
and attach it to the milestone.

(Enable referer sending in your browser if necessary)

Go to https://launchpad.net/i2p/trunk
Down at bottom, click 'create milestone'
    Name: 0.9.xx (NOT i2p 0.9.xx)
    Code name: empty
    Date targeted: Actual release date
    Tags: empty
    Summary: empty
Click 'create milestone'
Now you are back on https://launchpad.net/i2p/trunk
At your milestone, 'release now'
    Date released: Actual release date
    Release notes: empty
    Changelog: empty
Click 'create release'
Now you on the page for that milestone
Click 'add download file'
For each of the four files
    i2psource_0.9.xx.tar.bz2
      Description: I2P 0.9.xx Source Code
      Sig: i2psource_0.9.xx.tar.bz2.sig
      File Content Type: Code Release Tarball
    i2pinstall_0.9.xx_windows.exe
      Description: I2P 0.9.xx Installer for Windows
      Sig: i2pinstall_0.9.xx_windows.exe.sig
      File Content Type: Installer File
    i2pinstall_0.9.xx.jar
      Description: I2P 0.9.xx Installer (Linux / OSX / FreeBSD / Solaris)
      Sig: i2pinstall_0.9.xx.jar.sig
      File Content Type: Installer File
    i2pupdate_0.9.xx.zip
      Description: I2P 0.9.xx Update
      Sig: i2pupdate_0.9.xx.zip.sig
      File Content Type: Installer File