#!/bin/sh # # Copyright (c) 1999, 2011 Tanuki Software, Ltd. # http://www.tanukisoftware.com # All rights reserved. # # Make sure that PIDFILE points to the correct location, # if you have changed the default location set in the # wrapper configuration file. # # If this script fails to successfully invoke i2psvc on your platform, # try the runplain.sh script instead. # # This software is the proprietary information of Tanuki Software. # You shall use it only in accordance with the terms of the # license agreement you entered into with Tanuki Software. # http://wrapper.tanukisoftware.com/doc/english/licenseOverview.html # # Java Service Wrapper sh script. Suitable for starting and stopping # wrapped Java applications on UNIX platforms. # #----------------------------------------------------------------------------- # These settings can be modified to fit the needs of your application # Optimized for use with version 3.5.22 of the Wrapper. # Paths # Note that (percent)INSTALL_PATH, (percent)USER_HOME, and (percent)SYSTEM_java_io_tmpdir # should have been replaced by the izpack installer. # If you did not run the installer, replace them with the appropriate paths. I2P="%INSTALL_PATH" if [ "`uname -s`" = "Darwin" ]; then if [ -d "%USER_HOME/Library/Application Support" ]; then I2P_CONFIG_DIR="%USER_HOME/Library/Application Support/i2p" else I2P_CONFIG_DIR="%USER_HOME/.i2p" fi else I2P_CONFIG_DIR="%USER_HOME/.i2p" fi I2PTEMP="%SYSTEM_java_io_tmpdir" # PORTABLE installation: # Use the following instead. #I2PTEMP="%INSTALL_PATH" # Application APP_NAME="i2p" APP_LONG_NAME="I2P Service" # gettext - we look for it in the path # fallback to echo is below, we can't set it to echo here. GETTEXT=$(which gettext > /dev/null 2>&1) # Where to install the systemd service SYSTEMD_SERVICE="/etc/systemd/system/${APP_NAME}.service" if grep -q systemd /proc/1/comm > /dev/null 2>&1 ; then USE_SYSTEMD=1 fi # If specified, the Wrapper will be run as the specified user. # IMPORTANT - Make sure that the user has the required privileges to write # the PID file and wrapper.log files and that the directories exist. # Failure to write the pid file will cause the Wrapper to exit. # Failure to write the log file will cause the Wrapper to use CWD for the log file location. # # NOTE - This will set the user which is used to run the Wrapper as well as # the JVM and is not useful in situations where a privileged resource or # port needs to be allocated prior to the user being changed. #RUN_AS_USER= # Wrapper WRAPPER_CMD="$I2P/i2psvc" WRAPPER_CONF="$I2P/wrapper.config" # Priority at which to run the wrapper. See "man nice" for valid priorities. # nice is only used if a priority is specified. PRIORITY= # Location of the pid and status files. PIDDIR="$I2P_CONFIG_DIR" #PIDDIR="$I2PTEMP" # Location of the wrapper.log file LOGDIR="$I2P_CONFIG_DIR" #LOGDIR="$I2PTEMP" LOGFILE="$LOGDIR/wrapper.log" # If you'd like to run I2P as root (not recommended), uncomment the # following line #ALLOW_ROOT=true # FIXED_COMMAND tells the script to use a hard coded action rather than # expecting the first parameter of the command line to be the command. # By default the command will will be expected to be the first parameter. #FIXED_COMMAND=console # PASS_THROUGH tells the script to pass all arguments through to the JVM # as is. If FIXED_COMMAND is specified then all arguments will be passed. # If not set then all arguments starting with the second will be passed. #PASS_THROUGH=true # If uncommented, causes the Wrapper to be shutdown using an anchor file. # When launched with the 'start' command, it will also ignore all INT and # TERM signals. #IGNORE_SIGNALS=true # Wrapper will start the JVM asynchronously. Your application may have some # initialization tasks and it may be desirable to wait a few seconds # before returning. For example, to delay the invocation of following # startup scripts. Setting WAIT_AFTER_STARTUP to a positive number will # cause the start command to delay for the indicated period of time # (in seconds). # WAIT_AFTER_STARTUP=0 # If set, wait for the wrapper to report that the daemon has started WAIT_FOR_STARTED_STATUS=true WAIT_FOR_STARTED_TIMEOUT=120 # If set, the status, start_msg and stop_msg commands will print out detailed # state information on the Wrapper and Java processes. #DETAIL_STATUS=true # By default we show a detailed usage block. Uncomment to show brief usage. #BRIEF_USAGE=true # flag for using upstart when installing (rather than init.d rc.d) USE_UPSTART= # Source the environment variables for the locale if $LANG isn't set # If you want to set custom locale variables for I2P, # you may comment out this block and set them yourself here. if [ ! -n $LANG ]; then for ENV_FILE in /etc/environment /etc/default/locale; do [ -r "$ENV_FILE" ] || continue [ -s "$ENV_FILE" ] || continue for var in LANG LANGUAGE LC_ALL LC_CTYPE; do value=`egrep "^${var}=" "$ENV_FILE" | tail -n1 | cut -d= -f2` [ -n "$value" ] && eval export $var=$value done done fi # Mac OSX 10.10 requires the parameter bellow to run without a icon in the Dock. if [ "`uname -s`" = "Darwin" ]; then export JAVA_TOOL_OPTIONS="-Djava.awt.headless=true" fi # When installing on On Mac OSX platforms, the following domain will be used to # prefix the plist file name. PLIST_DOMAIN=org.tanukisoftware.wrapper # The following two lines are used by the chkconfig command. Change as is # appropriate for your application. They should remain commented. # chkconfig: 2345 20 80 # description: I2P Service # Initialization block for the install_initd and remove_initd scripts used by # SUSE linux distributions. ### BEGIN INIT INFO # Provides: i2p # Required-Start: $local_fs $network $syslog # Should-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: I2P Service # Description: I2P is a load-balanced unspoofable packet switching network ### END INIT INFO # Do not modify anything beyond this point #----------------------------------------------------------------------------- if [ ! -e "$WRAPPER_CONF" ]; then echo "Starting I2P Failed: Unable to find $WRAPPER_CONF" exit 1 fi # Workaround for Gentoo JAVABINARY=$(awk -F'=' '/^ *wrapper\.java\.command/{print $2}' "$WRAPPER_CONF") if [ -e /etc/gentoo-release ]; then if [ $JAVABINARY = java ]; then if [ -x /etc/java-config-2/current-system-vm/bin/java ]; then JAVABINARY="/etc/java-config-2/current-system-vm/bin/java" else echo "Please set wrapper.java.command in $WRAPPER_CONF" exit 1 fi fi fi WRAPPER_URL="https://geti2p.net/en/misc/manual-wrapper" unsupported() { echo "The most likely reason is that a supported version of the java" echo "wrapper is not available in the I2P installation package for your" echo "platform. It may be possible to manually download and install" echo "a compatible wrapper for your system." echo "See ${WRAPPER_URL} for hints." echo echo "In the meantime, you may start I2P by running the script" echo "${I2P}/runplain.sh" echo } freebsd10() { echo echo "The current version of the Tanuki wrapper does not" echo "support FreeBSD 10." echo echo "See https://trac.i2p2.de/ticket/1118 for more information" echo "and a workaround for this issue." echo echo "In the meantime, you may start I2P by running the script" echo "${I2P}/runplain.sh" echo } failed() { echo "**`gettext 'Failed to load the wrapper'`**" case `uname -s` in FreeBSD) case `uname -r` in 10*|11*) freebsd10 ;; *) # We should never get here on recent versions of FreeBSD if ! $(pkg_info -E 'libiconv*' > /dev/null 2>&1); then echo echo "The wrapper requires libiconv." echo echo "It can be installed with pkg_add -r libiconv" echo fi ;; esac ;; *) echo unsupported ;; esac exit 1 } if [ -n "$FIXED_COMMAND" ] then COMMAND="$FIXED_COMMAND" else COMMAND="$1" fi # Required for HP-UX Startup if [ `uname -s` = "HP-UX" -o `uname -s` = "HP-UX64" ] ; then PATH=$PATH:/usr/bin fi # Get the fully qualified path to the script case $0 in /*) SCRIPT="$0" ;; *) PWD=`pwd` SCRIPT="$PWD/$0" ;; esac # Resolve the true real path without any sym links. CHANGED=true while [ "X$CHANGED" != "X" ] do # Change spaces to ":" so the tokens can be parsed. SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'` # Get the real path to this script, resolving any symbolic links TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'` REALPATH= for C in $TOKENS; do # Change any ":" in the token back to a space. C=`echo $C | sed -e 's;:; ;g'` REALPATH="$REALPATH/$C" # If REALPATH is a sym link, resolve it. Loop for nested links. while [ -h "$REALPATH" ] ; do LS="`ls -ld "$REALPATH"`" LINK="`expr "$LS" : '.*-> \(.*\)$'`" if expr "$LINK" : '/.*' > /dev/null; then # LINK is absolute. REALPATH="$LINK" else # LINK is relative. REALPATH="`dirname "$REALPATH"`""/$LINK" fi done done if [ "$REALPATH" = "$SCRIPT" ] then CHANGED="" else SCRIPT="$REALPATH" fi done # Get the location of the script. REALDIR=`dirname "$REALPATH"` # Normalize the path REALDIR=`cd "${REALDIR}"; pwd` # If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if # the working directory is later changed. FIRST_CHAR=`echo $PIDDIR | cut -c1,1` if [ "$FIRST_CHAR" != "/" ] then PIDDIR=$REALDIR/$PIDDIR fi # Same test for WRAPPER_CMD FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1` if [ "$FIRST_CHAR" != "/" ] then WRAPPER_CMD=$REALDIR/$WRAPPER_CMD fi # Same test for WRAPPER_CONF FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1` if [ "$FIRST_CHAR" != "/" ] then WRAPPER_CONF=$REALDIR/$WRAPPER_CONF fi # Process ID ANCHORFILE="$PIDDIR/$APP_NAME.anchor" COMMANDFILE="$PIDDIR/$APP_NAME.command" STATUSFILE="$PIDDIR/$APP_NAME.status" JAVASTATUSFILE="$PIDDIR/$APP_NAME.java.status" PIDFILE="$PIDDIR/$APP_NAME.pid" LOCKDIR="/var/lock/subsys" LOCKFILE="$LOCKDIR/$APP_NAME" pid="" # Resolve the location of the 'ps' command PSEXE="/usr/ucb/ps" if [ ! -x "$PSEXE" ] then PSEXE="/usr/bin/ps" if [ ! -x "$PSEXE" ] then PSEXE="/bin/ps" if [ ! -x "$PSEXE" ] then echo 'Unable to locate "ps".' echo 'Please report this message along with the location of the command on your system.' exit 1 fi fi fi TREXE="/usr/bin/tr" if [ ! -x "$TREXE" ] then TREXE="/bin/tr" if [ ! -x "$TREXE" ] then echo 'Unable to locate "tr".' echo 'Please report this message along with the location of the command on your system.' exit 1 fi fi # Resolve the os DIST_OS=`uname -s | $TREXE "[A-Z]" "[a-z]" | $TREXE -d ' '` case "$DIST_OS" in 'sunos') DIST_OS="solaris" ;; 'hp-ux' | 'hp-ux64') # HP-UX needs the XPG4 version of ps (for -o args) DIST_OS="hpux" UNIX95="" export UNIX95 ;; 'darwin') DIST_OS="macosx" ;; 'unix_sv') DIST_OS="unixware" ;; 'gnu/kfreebsd') DIST_OS="kfreebsd" ;; 'os/390') DIST_OS="zos" ;; esac # Resolve the architecture if [ "$DIST_OS" = "macosx" ] then OS_VER=`sw_vers | grep ProductVersion | cut -d: -f2 | sed -e 's/[^0-9]*//'` DIST_ARCH="universal" if [ $(sysctl -n hw.cpu64bit_capable) -eq 1 ]; then DIST_BITS="64" else DIST_BITS="32" fi APP_PLIST_BASE=${PLIST_DOMAIN}.${APP_NAME} APP_PLIST=${APP_PLIST_BASE}.plist else DIST_ARCH=`uname -m 2>/dev/null | $TREXE "[A-Z]" "[a-z]" | $TREXE -d ' '` case "$DIST_ARCH" in 'athlon' | 'i386' | 'i486' | 'i586' | 'i686') DIST_ARCH="x86" if [ "${DIST_OS}" = "solaris" ] ; then DIST_BITS=`isainfo -b` else DIST_BITS="32" fi ;; amdfx* | 'amd64' | 'x86_64') DIST_ARCH="x86" DIST_BITS="64" ;; 'ia32') DIST_ARCH="ia" DIST_BITS="32" ;; 'ia64' | 'ia64n' | 'ia64w') DIST_ARCH="ia" DIST_BITS="64" ;; 'ip27') DIST_ARCH="mips" DIST_BITS="32" ;; 'power' | 'powerpc' | 'power_pc' | 'ppc64') if [ "${DIST_ARCH}" = "ppc64" ] ; then DIST_BITS="64" else DIST_BITS="32" fi DIST_ARCH="ppc" if [ "${DIST_OS}" = "aix" ] ; then if [ `getconf KERNEL_BITMODE` -eq 64 ]; then DIST_BITS="64" else DIST_BITS="32" fi fi ;; 'pa_risc' | 'pa-risc') DIST_ARCH="parisc" if [ `getconf KERNEL_BITS` -eq 64 ]; then DIST_BITS="64" else DIST_BITS="32" fi ;; 'sun4u' | 'sparcv9' | 'sparc') DIST_ARCH="sparc" DIST_BITS=`isainfo -b` ;; '9000/800' | '9000/785') DIST_ARCH="parisc" if [ `getconf KERNEL_BITS` -eq 64 ]; then DIST_BITS="64" else DIST_BITS="32" fi ;; '2064' | '2066' | '2084' | '2086' | '2094' | '2096' | '2097' | '2098' | '2817') DIST_ARCH="390" DIST_BITS="64" ;; armv*) if [ -z "`readelf -A /proc/self/exe | grep Tag_ABI_VFP_args`" ] ; then DIST_ARCH="armel" DIST_BITS="32" else DIST_ARCH="armhf" DIST_BITS="32" fi ;; esac fi # OSX always places Java in the same location so we can reliably set JAVA_HOME if [ "$DIST_OS" = "macosx" ] then if [ -z "$JAVA_HOME" ]; then JAVA_HOME="/Library/Java/Home"; export JAVA_HOME fi fi # Test Echo ECHOTEST=`echo -n "x"` if [ "$ECHOTEST" = "x" ] then ECHOOPT="-n " else ECHOOPT="" fi gettext() { # Call external gettext using our own translation files. # Don't attempt to translate via the wrapper, # it probably isn't supported in the community edition. if [ "X${LANG#en}" = "X$LANG" ] && [ $(which $GETTEXT > /dev/null 2>&1) ] ; then TEXTDOMAINDIR=$I2P/locale $GETTEXT -d i2prouter "$1" if [ $? != 0 ] ; then echo "$1" fi else echo "$1" fi } outputFile() { if [ -f "$1" ] then echo " $1 Found but not executable."; else echo " $1" fi } setup_openbsd() { if ! pkg_info -qe 'java-tanukiwrapper->=3.5.19'; then echo "Java wrapper not found. Either:" echo "- install the package java-tanukiwrapper then start I2P again; or" echo "- start I2P with $I2P/runplain.sh" exit 1 else # Wrapper package is installed so let's try copying the bits into the proper places pkg_path=$(pkg_info -v java-tanukiwrapper | awk '/^@cwd/{print $2}') if [ -z $pkg_path ]; then # Fallback, but we shouldn't end up here echo "Unable to locate ${WRAPPER_CMD} in ${I2P}!" echo unsupported exit 1 fi set -e # abort in case of error # Package java-tanukiwrapper-3.5.19.1 misspells 'tanuki' if [ -e "$pkg_path/lib/tanukuwrapper/libwrapper.so" ]; then ln -sf "$pkg_path/lib/tanukuwrapper/libwrapper.so" "$I2P/lib/libwrapper.so" else # they fixed the path ln -sf "$pkg_path/lib/tanukiwrapper/libwrapper.so" "$I2P/lib/libwrapper.so" fi ln -sf "$pkg_path/share/java/classes/tanukiwrapper.jar" "$I2P/lib/wrapper.jar" ln -sf "$pkg_path/sbin/tanukiwrapper" "$WRAPPER_CMD" fi set +e } if [ "$DIST_OS"="openbsd" -a ! -f "$WRAPPER_CMD" ]; then # We handle it here because Tanuki doesn't ship OpenBSD binaries. # We don't either, but they are (finally!) in OpenBSD itself. setup_openbsd fi # Decide on the wrapper binary to use. # If the bits of the OS could be detected, we will try to look for the # binary with the correct bits value. If it doesn't exist, fall back # and look for the 32-bit binary. If that doesn't exist either then # look for the default. WRAPPER_TEST_CMD="" if [ -f "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS" ] then WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS" if [ ! -x "$WRAPPER_TEST_CMD" ] then chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null fi if [ -x "$WRAPPER_TEST_CMD" ] then WRAPPER_CMD="$WRAPPER_TEST_CMD" else outputFile "$WRAPPER_TEST_CMD" WRAPPER_TEST_CMD="" fi fi if [ -f "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" -a -z "$WRAPPER_TEST_CMD" ] then WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" if [ ! -x "$WRAPPER_TEST_CMD" ] then chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null fi if [ -x "$WRAPPER_TEST_CMD" ] then WRAPPER_CMD="$WRAPPER_TEST_CMD" else outputFile "$WRAPPER_TEST_CMD" WRAPPER_TEST_CMD="" fi fi if [ -f "$WRAPPER_CMD" -a -z "$WRAPPER_TEST_CMD" ] then WRAPPER_TEST_CMD="$WRAPPER_CMD" if [ ! -x "$WRAPPER_TEST_CMD" ] then chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null fi if [ -x "$WRAPPER_TEST_CMD" ] then WRAPPER_CMD="$WRAPPER_TEST_CMD" else outputFile "$WRAPPER_TEST_CMD" WRAPPER_TEST_CMD="" fi fi if [ -z "$WRAPPER_TEST_CMD" ] then echo 'Unable to locate any of the following binaries:' outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS" if [ ! "$DIST_BITS" = "32" ] then outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" fi outputFile "$WRAPPER_CMD" exit 1 fi if [ ! -r "${WRAPPER_CMD}" ]; then echo "Unable to locate ${WRAPPER_CMD} in ${I2P}!" echo unsupported echo exit 1 fi if $(which ldd > /dev/null 2>&1); then # This should cover every *NIX other than OSX since OSX doesn't have ldd. # OSX has otool. Is otool on every OSX installation? Is otool's output the same as ldd's? # The wrapper we ship for OSX are for PPC and Intel, so maybe we don't need to worry about OSX? if (ldd "$WRAPPER_CMD" |grep -q 'not found') > /dev/null 2>&1 || \ ! (ldd "$WRAPPER_CMD" > /dev/null 2>&1); then failed fi fi # Build the nice clause if [ "X$PRIORITY" = "X" ] then CMDNICE="" else CMDNICE="nice -$PRIORITY" fi # Build the anchor file clause. if [ "X$IGNORE_SIGNALS" = "X" ] then ANCHORPROP= IGNOREPROP= else ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\" IGNOREPROP=wrapper.ignore_signals=TRUE fi # Build the status file clause. if [ "X$DETAIL_STATUS$WAIT_FOR_STARTED_STATUS" = "X" ] then STATUSPROP= else STATUSPROP="wrapper.statusfile=\"$STATUSFILE\" wrapper.java.statusfile=\"$JAVASTATUSFILE\"" fi # Build the command file clause. COMMANDPROP= # Build the log file clause. LOGPROP="wrapper.logfile=\"$LOGFILE\"" if [ ! -n "$WAIT_FOR_STARTED_STATUS" ] then WAIT_FOR_STARTED_STATUS=true fi if [ $WAIT_FOR_STARTED_STATUS = true ] ; then DETAIL_STATUS=true fi # Build the lock file clause. Only create a lock file if the lock directory exists on this platform. LOCKPROP= if [ -d $LOCKDIR ] then if [ -w $LOCKDIR ] then LOCKPROP=wrapper.lockfile=\"$LOCKFILE\" fi fi prepAdditionalParams() { ADDITIONAL_PARA="" if [ -n "$PASS_THROUGH" ] ; then ADDITIONAL_PARA="--" fi while [ -n "$1" ] ; do ADDITIONAL_PARA="$ADDITIONAL_PARA \"$1\"" shift done } checkUser() { # $1 touchLock flag # $2.. [command] args # Check the configured user. If necessary rerun this script as the desired user. if [ "X$RUN_AS_USER" != "X" ] then # Resolve the location of the 'id' command IDEXE="/usr/xpg4/bin/id" if [ ! -x "$IDEXE" ] then IDEXE="/usr/bin/id" if [ ! -x "$IDEXE" ] then echo 'Unable to locate "id".' echo 'Please report this message along with the location of the command on your system.' exit 1 fi fi if [ "`$IDEXE -u -n "$RUN_AS_USER" 2>/dev/null`" != "$RUN_AS_USER" ] then echo "User $RUN_AS_USER does not exist." exit 1 fi if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ] then # Already running as the configured user. Avoid password prompts by not calling su. RUN_AS_USER="" fi fi if [ "X$RUN_AS_USER" != "X" ] then # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be # able to create the lock file. The Wrapper will be able to update this file once it # is created but will not be able to delete it on shutdown. If $1 is set then # the lock file should be created for the current command if [ "X$LOCKPROP" != "X" ] then if [ "X$1" != "X" ] then # Resolve the primary group RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1` if [ "X$RUN_AS_GROUP" = "X" ] then RUN_AS_GROUP=$RUN_AS_USER fi touch $LOCKFILE chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE fi fi # Still want to change users, recurse. This means that the user will only be # prompted for a password once. Variables shifted by 1 shift # Wrap the parameters so they can be passed. ADDITIONAL_PARA="" while [ -n "$1" ] ; do ADDITIONAL_PARA="$ADDITIONAL_PARA \"$1\"" shift done # Use "runuser" if this exists. runuser should be used on RedHat in preference to su. # if test -f "/sbin/runuser" then /sbin/runuser -s /bin/sh - $RUN_AS_USER -c "\"$REALPATH\" $ADDITIONAL_PARA" else su - $RUN_AS_USER -s /bin/sh -c "\"$REALPATH\" $ADDITIONAL_PARA" fi RUN_AS_USER_EXITCODE=$? # Now that we are the original user again, we may need to clean up the lock file. if [ "X$LOCKPROP" != "X" ] then getpid if [ "X$pid" = "X" ] then # Wrapper is not running so make sure the lock file is deleted. if [ -f "$LOCKFILE" ] then rm "$LOCKFILE" fi fi fi exit $RUN_AS_USER_EXITCODE fi } getpid() { pid="" if [ -f "$PIDFILE" ] then if [ -r "$PIDFILE" ] then pid=`cat "$PIDFILE"` if [ "X$pid" != "X" ] then # It is possible that 'a' process with the pid exists but that it is not the # correct process. This can happen in a number of cases, but the most # common is during system startup after an unclean shutdown. # The ps statement below looks for the specific wrapper command running as # the pid. If it is not found then the pid file is considered to be stale. case "$DIST_OS" in 'freebsd') pidtest=`$PSEXE -p $pid -o args | tail -1` if [ "X$pidtest" = "XCOMMAND" ] then pidtest="" fi ;; 'macosx') pidtest=`$PSEXE -ww -p $pid -o command | grep -F "$WRAPPER_CMD" | tail -1` ;; 'solaris') if [ -f "/usr/bin/pargs" ] then pidtest=`pargs $pid | fgrep "$WRAPPER_CMD" | tail -1` else case "$PSEXE" in '/usr/ucb/ps') pidtest=`$PSEXE -auxww $pid | fgrep "$WRAPPER_CMD" | tail -1` ;; '/usr/bin/ps') TRUNCATED_CMD=`$PSEXE -o comm -p $pid | tail -1` COUNT=`echo $TRUNCATED_CMD | wc -m` COUNT=`echo ${COUNT}` COUNT=`expr $COUNT - 1` TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT` pidtest=`$PSEXE -o comm -p $pid | fgrep "$TRUNCATED_CMD" | tail -1` ;; '/bin/ps') TRUNCATED_CMD=`$PSEXE -o comm -p $pid | tail -1` COUNT=`echo $TRUNCATED_CMD | wc -m` COUNT=`echo ${COUNT}` COUNT=`expr $COUNT - 1` TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT` pidtest=`$PSEXE -o comm -p $pid | fgrep "$TRUNCATED_CMD" | tail -1` ;; *) echo "Unsupported ps command $PSEXE" exit 1 ;; esac fi ;; 'hpux') pidtest=`$PSEXE -p $pid -x -o args | grep -F "$WRAPPER_CMD" | tail -1` ;; *) pidtest=`$PSEXE -p $pid -o args | grep -F "$WRAPPER_CMD" | tail -1` ;; esac if [ "X$pidtest" = "X" ] then # This is a stale pid file. rm -f "$PIDFILE" echo "Removed stale pid file: $PIDFILE" pid="" fi fi else echo "Cannot read $PIDFILE." exit 1 fi fi } getstatus() { STATUS= if [ -f "$STATUSFILE" ] then if [ -r "$STATUSFILE" ] then STATUS=`cat "$STATUSFILE"` fi fi if [ "X$STATUS" = "X" ] then STATUS="Unknown" fi JAVASTATUS= if [ -f "$JAVASTATUSFILE" ] then if [ -r "$JAVASTATUSFILE" ] then JAVASTATUS=`cat "$JAVASTATUSFILE"` fi fi if [ "X$JAVASTATUS" = "X" ] then JAVASTATUS="Unknown" fi } testpid() { case "$DIST_OS" in 'solaris') case "$PSEXE" in '/usr/ucb/ps') pid=`$PSEXE $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` ;; '/usr/bin/ps') pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` ;; '/bin/ps') pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` ;; *) echo "Unsupported ps command $PSEXE" exit 1 ;; esac ;; *) pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` 2>/dev/null ;; esac if [ "X$pid" = "X" ] then # Process is gone so remove the pid file. rm -f "$PIDFILE" pid="" fi } launchdtrap() { stopit exit } waitforwrapperstop() { getpid while [ "X$pid" != "X" ] ; do sleep 1 getpid done } create_config_dir() { if [ ! -d "$I2P_CONFIG_DIR" ]; then UMASK=$(awk -F'=' '/^ *wrapper\.umask/{print $2}' $WRAPPER_CONF) umask $UMASK if ! mkdir -p "$I2P_CONFIG_DIR"; then echo "Error creating $I2P_CONFIG_DIR! Edit $0 and set I2P_CONFIG_DIR" >&2 echo "to the correct location." >&2 exit 1 fi fi } launchdinternal() { getpid trap launchdtrap TERM if [ "X$pid" = "X" ] then prepAdditionalParams "$@" create_config_dir # The string passed to eval must handles spaces in paths correctly. COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.java.command=\"$JAVABINARY\" wrapper.displayname=\"$APP_LONG_NAME\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $STATUSPROP $COMMANDPROP $LOCKPROP $LOGPROP $ADDITIONAL_PARA" eval $COMMAND_LINE || failed else eval echo `gettext '$APP_LONG_NAME is already running.'` exit 1 fi # launchd expects that this script stay up and running so we need to do our own monitoring of the Wrapper process. if [ $WAIT_FOR_STARTED_STATUS = true ] then waitforwrapperstop fi } console() { eval echo "`gettext 'Running $APP_LONG_NAME'`..." getpid if [ "X$pid" = "X" ] then trap '' 3 2 prepAdditionalParams "$@" create_config_dir # The string passed to eval must handles spaces in paths correctly. COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.java.command=\"$JAVABINARY\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\" $ANCHORPROP $STATUSPROP $COMMANDPROP $LOCKPROP $LOGPROP $ADDITIONAL_PARA" eval $COMMAND_LINE || failed else eval echo `gettext '$APP_LONG_NAME is already running.'` exit 1 fi } waitforjavastartup() { getstatus eval echo $ECHOOPT "`gettext 'Waiting for $APP_LONG_NAME'`..." # Wait until the timeout or we have something besides Unknown. counter=15 while [ "$JAVASTATUS" = "Unknown" -a $counter -gt 0 -a -n "$JAVASTATUS" ] ; do echo $ECHOOPT"." sleep 1 getstatus counter=`expr $counter - 1` done if [ -n "$WAIT_FOR_STARTED_TIMEOUT" ] ; then counter=$WAIT_FOR_STARTED_TIMEOUT else counter=120 fi while [ "$JAVASTATUS" != "STARTED" -a "$JAVASTATUS" != "Unknown" -a $counter -gt 0 -a -n "$JAVASTATUS" ] ; do echo $ECHOOPT"." sleep 1 getstatus counter=`expr $counter - 1` done if [ "X$ECHOOPT" != "X" ] ; then echo "" fi } startwait() { if [ $WAIT_FOR_STARTED_STATUS = true ] then waitforjavastartup fi # Sleep for a few seconds to allow for intialization if required # then test to make sure we're still running. # i=0 while [ $i -lt $WAIT_AFTER_STARTUP ] do sleep 1 echo $ECHOOPT"." i=`expr $i + 1` done if [ $WAIT_AFTER_STARTUP -gt 0 -o $WAIT_FOR_STARTED_STATUS = true ] then getpid if [ "X$pid" = "X" ] then eval echo " `gettext 'WARNING: $APP_LONG_NAME may have failed to start.'`" failed else eval echo ' running: PID:$pid' fi else echo "" fi } macosxstart() { # The daemon has been installed. echo "Starting $APP_LONG_NAME. Detected Mac OSX and installed launchd daemon." if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then eval echo `gettext 'Must be root to perform this action.'` exit 1 fi getpid if [ "X$pid" != "X" ] ; then eval echo `gettext '$APP_LONG_NAME is already running.'` exit 1 fi # If the daemon was just installed, it may not be loaded. LOADED_PLIST=`launchctl list | grep ${APP_PLIST_BASE}` if [ "X${LOADED_PLIST}" = "X" ] ; then launchctl load /Library/LaunchDaemons/${APP_PLIST} fi # If launchd is set to run the daemon already at Load, we don't need to call start getpid if [ "X$pid" = "X" ] ; then launchctl start ${APP_PLIST_BASE} fi startwait } upstartstart() { # The daemon has been installed. echo "Starting $APP_LONG_NAME. Detected Linux and installed upstart." if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then eval echo `gettext 'Must be root to perform this action.'` exit 1 fi getpid if [ "X$pid" != "X" ] ; then eval echo `gettext '$APP_LONG_NAME is already running.'` exit 1 fi /sbin/start ${APP_NAME} startwait } start() { eval echo "`gettext 'Starting $APP_LONG_NAME'`..." getpid if [ "X$pid" = "X" ] then prepAdditionalParams "$@" create_config_dir # The string passed to eval must handles spaces in paths correctly. COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.java.command=\"$JAVABINARY\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $STATUSPROP $COMMANDPROP $LOCKPROP $LOGPROP $ADDITIONAL_PARA" eval $COMMAND_LINE || failed else eval echo `gettext '$APP_LONG_NAME is already running.'` exit 1 fi startwait } stopit() { # $1 exit if down flag eval echo "`gettext 'Stopping $APP_LONG_NAME'`..." getpid if [ "X$pid" = "X" ] then eval echo `gettext '$APP_LONG_NAME was not running.'` if [ "X$1" = "X1" ] then exit 1 fi else if [ "X$IGNORE_SIGNALS" = "X" ] then # Running so try to stop it. kill -TERM $pid if [ $? -ne 0 ] then # An explanation for the failure should have been given eval echo `gettext 'Unable to stop $APP_LONG_NAME.'` exit 1 fi else rm -f "$ANCHORFILE" if [ -f "$ANCHORFILE" ] then # An explanation for the failure should have been given eval echo `gettext 'Unable to stop $APP_LONG_NAME.'` exit 1 fi fi # We can not predict how long it will take for the wrapper to # actually stop as it depends on settings in wrapper.conf. # Loop until it does. savepid=$pid CNT=0 TOTCNT=0 while [ "X$pid" != "X" ] do # Show a waiting message every 5 seconds. if [ "$CNT" -lt "5" ] then CNT=`expr $CNT + 1` else eval echo "`gettext 'Waiting for $APP_LONG_NAME to exit'`..." CNT=0 fi TOTCNT=`expr $TOTCNT + 1` sleep 1 testpid done pid=$savepid testpid if [ "X$pid" != "X" ] then eval echo `gettext 'Failed to stop $APP_LONG_NAME.'` exit 1 else eval echo `gettext 'Stopped $APP_LONG_NAME.'` fi fi } graceful() { # $1 exit if down flag eval echo "`gettext 'Stopping $APP_LONG_NAME gracefully'`..." getpid if [ "X$pid" = "X" ] then eval echo `gettext '$APP_LONG_NAME was not running.'` if [ "X$1" = "X1" ] then exit 1 fi else if [ "X$IGNORE_SIGNALS" = "X" ] then # Running so try to stop it. # This sends HUP. router.gracefulHUP must be set in router.config, # or else this will do the same as stop. kill -HUP $pid if [ $? -ne 0 ] then # An explanation for the failure should have been given eval echo `gettext 'Unable to stop $APP_LONG_NAME.'` exit 1 fi else rm -f "$ANCHORFILE" if [ -f "$ANCHORFILE" ] then # An explanation for the failure should have been given eval echo `gettext 'Unable to stop $APP_LONG_NAME.'` exit 1 fi fi fi } pause() { echo "Pausing $APP_LONG_NAME." } resume() { echo "Resuming $APP_LONG_NAME." } status() { getpid if [ "X$pid" = "X" ] then eval echo `gettext '$APP_LONG_NAME is not running.'` exit 1 else if [ "X$DETAIL_STATUS" = "X" ] then eval echo `gettext '$APP_LONG_NAME is running: PID:$pid'` else getstatus eval echo `gettext '$APP_LONG_NAME is running: PID:$pid, Wrapper:$STATUS, Java:$JAVASTATUS'` fi exit 0 fi } installUpstart() { echo " Installing the $APP_LONG_NAME daemon using upstart.." if [ -f "${APP_NAME}.conf" ] ; then echo " a custom upstart conf file ${APP_NAME}.conf found" cp "${REALDIR}/${APP_NAME}.install" "/etc/init/${APP_NAME}.conf" else echo ' creating default upstart conf file..' echo "# ${APP_NAME} - ${APP_LONG_NAME}" > "/etc/init/${APP_NAME}.conf" echo "description \"${APP_LONG_NAME}\"" >> "/etc/init/${APP_NAME}.conf" echo "author \"Tanuki Software Ltd. \"" >> "/etc/init/${APP_NAME}.conf" echo "start on runlevel [2345]" >> "/etc/init/${APP_NAME}.conf" echo "stop on runlevel [!2345]" >> "/etc/init/${APP_NAME}.conf" echo "env LANG=${LANG}" >> "/etc/init/${APP_NAME}.conf" echo "exec \"${REALPATH}\" launchdinternal" >> "/etc/init/${APP_NAME}.conf" fi } installsystemd() { if [ -d "/etc/systemd/system/" ]; then cat << EOF >> "$SYSTEMD_SERVICE" [Unit] Description=$APP_LONG_NAME After= local-fs.target network.target [Service] Type=forking ExecStart=$I2P/i2prouter start ExecReload=$I2P/i2prouter restart ExecStop=$I2P/i2prouter stop PIDFile=$I2P_CONFIG_DIR/i2p.pid [Install] WantedBy=multi-user.target EOF systemctl --system daemon-reload > /dev/null 2>&1 fi } installdaemon() { if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then eval echo `gettext 'Must be root to perform this action.'` exit 1 else APP_NAME_LOWER=`echo "$APP_NAME" | $TREXE "[A-Z]" "[a-z]"` if [ "$DIST_OS" = "solaris" ] ; then echo 'Detected Solaris:' if [ -f /etc/init.d/$APP_NAME ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." ln -s "$REALPATH" "/etc/init.d/$APP_NAME" ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/K20$APP_NAME_LOWER" ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/S20$APP_NAME_LOWER" fi elif [ "$DIST_OS" = "linux" ] ; then if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ] ; then echo 'Detected RHEL or Fedora:' if [ -f "/etc/init.d/$APP_NAME" -o -f "/etc/init/${APP_NAME}.conf" ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else if [ -n "$USE_UPSTART" -a -d "/etc/init" ] ; then installUpstart else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." ln -s "$REALPATH" "/etc/init.d/$APP_NAME" /sbin/chkconfig --add "$APP_NAME" /sbin/chkconfig "$APP_NAME" on fi fi elif [ -f /etc/slackware-version ]; then echo 'Detected Slackware Linux:' if [ -e "/etc/rc.d/rc.i2p" -o -f "/etc/rc.d/rc.i2p.new" ]; then echo "Found initscript from I2P Slackpkg. Aborting." >&2 exit 1 else if grep -q ${APP_NAME}router /etc/rc.d/rc.local > /dev/null 2>&1; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else echo "${REALDIR}/${APP_NAME}router start" >> /etc/rc.d/rc.local if [ ! -e /etc/rc.d/rc.local_shutdown ]; then echo "#!/bin/sh" >> /etc/rc.d/rc.local_shutdown fi echo "${REALDIR}/${APP_NAME}router stop" >> /etc/rc.d/rc.local_shutdown chmod 755 /etc/rc.d/rc.local_shutdown fi fi elif [ -f /etc/arch-release ]; then echo 'Detected Arch Linux:' if [ -f "/etc/rc.d/i2prouter" -o -f "/usr/lib/systemd/system/i2prouter.service" ]; then echo 'AUR package found. Refusing to continue.' exit 1 elif [ -f /etc/rc.d/i2p -a ! "$USE_SYSTEMD" = "1" ] || [ -f "$SYSTEMD_SERVICE" -a "$USE_SYSTEMD" = "1" ]; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else if [ ! -f "/etc/init.d/i2p" ]; then if [ "$USE_SYSTEMD" != "1" ]; then echo "#!/bin/bash" > /etc/rc.d/${APP_NAME} echo >> /etc/rc.d/${APP_NAME} echo ". /etc/rc.conf" >> /etc/rc.d/${APP_NAME} echo ". /etc/rc.d/functions" >> /etc/rc.d/${APP_NAME} echo >> /etc/rc.d/${APP_NAME} echo "case "\$1" in" >> /etc/rc.d/${APP_NAME} echo " start)" >> /etc/rc.d/${APP_NAME} echo " stat_busy \"Starting i2p-Router\"" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router start >/dev/null 2>&1" >> /etc/rc.d/${APP_NAME} echo " if [ \$? -gt 0 ]; then" >> /etc/rc.d/${APP_NAME} echo " stat_fail" >> /etc/rc.d/${APP_NAME} echo " else" >> /etc/rc.d/${APP_NAME} echo " stat_done" >> /etc/rc.d/${APP_NAME} echo " add_daemon i2prouter" >> /etc/rc.d/${APP_NAME} echo " fi" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " stop)" >> /etc/rc.d/${APP_NAME} echo " stat_busy "Stopping i2p-Router"" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router stop > /dev/null 2>&1" >> /etc/rc.d/${APP_NAME} echo " if [ \$? -gt 0 ]; then" >> /etc/rc.d/${APP_NAME} echo " stat_fail" >> /etc/rc.d/${APP_NAME} echo " else" >> /etc/rc.d/${APP_NAME} echo " stat_done" >> /etc/rc.d/${APP_NAME} echo " rm_daemon i2prouter" >> /etc/rc.d/${APP_NAME} echo " fi" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " restart)" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router restart" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " console)" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router console" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " status)" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router status" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " dump)" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router dump" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " graceful)" >> /etc/rc.d/${APP_NAME} echo " ${REALDIR}/${APP_NAME}router graceful" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo " *)" >> /etc/rc.d/${APP_NAME} echo " echo \"usage: \$0 {start|stop|restart|console|status|dump}\"" >> /etc/rc.d/${APP_NAME} echo " ;;" >> /etc/rc.d/${APP_NAME} echo "esac" >> /etc/rc.d/${APP_NAME} chmod 755 /etc/rc.d/${APP_NAME} chown root:root /etc/rc.d/${APP_NAME} echo " The $APP_LONG_NAME daemon has been installed." echo ' Add \"i2p\" to the DAEMONS variable in /etc/rc.conf to enable.' else # We'll end up here if systemd is enabled. # If systemd is enabled we don't need the initscript rm -f /etc/rc.d/${APP_NAME} fi fi if [ ! -f "${SYSTEMD_SERVICE}" ]; then installsystemd fi fi elif [ -f /etc/SuSE-release ] ; then echo 'Detected SuSE or SLES:' if [ -f /etc/rc.d/${APP_NAME} -a ! "$USE_SYSTEMD" = "1" ] || [ -f "$SYSTEMD_SERVICE" -a "$USE_SYSTEMD" = "1" ]; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else if [ ! -f "/etc/init.d/$APP_NAME" ]; then if [ "$USE_SYSTEMD" != "1" ]; then eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." ln -s "$REALPATH" "/etc/init.d/$APP_NAME" sed -i "s/Default-Start: 2 3 4 5/Default-Start: 5/" $0 insserv "/etc/init.d/$APP_NAME" else rm -f "/etc/init.d/$APP_NAME" fi fi if [ ! -f "${SYSTEMD_SERVICE}" ]; then installsystemd fi fi elif [ -f /etc/lsb-release -o -f /etc/debian_version ] ; then echo 'Detected Debian-based distribution:' if [ -f "/etc/init.d/$APP_NAME" -o -f "/etc/init/${APP_NAME}.conf" ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else if [ -n "$USE_UPSTART" -a -d "/etc/init" ] ; then installUpstart else echo " Installing the $APP_LONG_NAME daemon using init.d.." ln -s "$REALPATH" "/etc/init.d/$APP_NAME" update-rc.d "$APP_NAME" defaults fi fi else echo 'Detected Linux:' if [ -f "/etc/init.d/$APP_NAME" ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." ln -s "$REALPATH" /etc/init.d/$APP_NAME ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/K20$APP_NAME_LOWER" ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/S20$APP_NAME_LOWER" ln -s "/etc/init.d/$APP_NAME" "/etc/rc5.d/S20$APP_NAME_LOWER" ln -s "/etc/init.d/$APP_NAME" "/etc/rc5.d/K20$APP_NAME_LOWER" fi fi elif [ "$DIST_OS" = "hpux" ] ; then echo 'Detected HP-UX:' if [ -f "/sbin/init.d/$APP_NAME" ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." ln -s "$REALPATH" "/sbin/init.d/$APP_NAME" ln -s "/sbin/init.d/$APP_NAME" "/sbin/rc3.d/K20$APP_NAME_LOWER" ln -s "/sbin/init.d/$APP_NAME" "/sbin/rc3.d/S20$APP_NAME_LOWER" fi elif [ "$DIST_OS" = "aix" ] ; then echo 'Detected AIX:' if [ -f "/etc/rc.d/init.d/$APP_NAME" ] ; then echo " The $APP_LONG_NAME daemon is already installed as rc.d script." exit 1 elif [ -n "`/usr/sbin/lsitab $APP_NAME`" -a -n "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then echo " The $APP_LONG_NAME daemon is already installed as SRC service." exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." if [ -n "`/usr/sbin/lsitab install_assist`" ] ; then echo ' The task /usr/sbin/install_assist was found in the inittab, this might cause problems for all subsequent tasks to launch at this process is known to block the init task. Please make sure this task is not needed anymore and remove/deactivate it.' fi /usr/bin/mkssys -s "$APP_NAME" -p "$REALPATH" -a "launchdinternal" -u 0 -f 9 -n 15 -S /usr/sbin/mkitab "$APP_NAME":2:once:"/usr/bin/startsrc -s \"${APP_NAME}\" >/dev/console 2>&1" fi elif [ "$DIST_OS" = "freebsd" ] ; then echo 'Detected FreeBSD:' if [ -f "/etc/rc.d/$APP_NAME" ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." sed -i .bak "/${APP_NAME}_enable=\"YES\"/d" /etc/rc.conf if [ -f "${REALDIR}/${APP_NAME}.install" ] ; then ln -s "${REALDIR}/${APP_NAME}.install" "/etc/rc.d/$APP_NAME" else echo '#!/bin/sh' > "/etc/rc.d/$APP_NAME" echo "#" >> "/etc/rc.d/$APP_NAME" echo "# PROVIDE: $APP_NAME" >> "/etc/rc.d/$APP_NAME" echo "# REQUIRE: NETWORKING" >> "/etc/rc.d/$APP_NAME" echo "# KEYWORD: shutdown" >> "/etc/rc.d/$APP_NAME" echo ". /etc/rc.subr" >> "/etc/rc.d/$APP_NAME" echo "name=\"$APP_NAME\"" >> "/etc/rc.d/$APP_NAME" echo "rcvar=\`set_rcvar\`" >> "/etc/rc.d/$APP_NAME" echo "command=\"${REALDIR}/${APP_NAME}router\"" >> "/etc/rc.d/$APP_NAME" echo 'start_cmd="${name}_start"' >> "/etc/rc.d/$APP_NAME" echo 'load_rc_config $name' >> "/etc/rc.d/$APP_NAME" echo 'status_cmd="${name}_status"' >> "/etc/rc.d/$APP_NAME" echo 'stop_cmd="${name}_stop"' >> "/etc/rc.d/$APP_NAME" echo "${APP_NAME}_status() {" >> "/etc/rc.d/$APP_NAME" echo '${command} status' >> "/etc/rc.d/$APP_NAME" echo '}' >> "/etc/rc.d/$APP_NAME" echo "${APP_NAME}_stop() {" >> "/etc/rc.d/$APP_NAME" echo '${command} stop' >> "/etc/rc.d/$APP_NAME" echo '}' >> "/etc/rc.d/$APP_NAME" echo "${APP_NAME}_start() {" >> "/etc/rc.d/$APP_NAME" echo '${command} start' >> "/etc/rc.d/$APP_NAME" echo '}' >> "/etc/rc.d/$APP_NAME" echo 'run_rc_command "$1"' >> "/etc/rc.d/$APP_NAME" fi echo "${APP_NAME}_enable=\"YES\"" >> /etc/rc.conf chmod 555 "/etc/rc.d/$APP_NAME" fi elif [ "$DIST_OS" = "macosx" ] ; then echo 'Detected Mac OSX:' if [ -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." if [ -f "${REALDIR}/${APP_PLIST}" ] ; then ln -s "${REALDIR}/${APP_PLIST}" "/Library/LaunchDaemons/${APP_PLIST}" else echo "" > "/Library/LaunchDaemons/${APP_PLIST}" echo "> "/Library/LaunchDaemons/${APP_PLIST}" echo "\"http://www.apple.com/DTDs/PropertyList-1.0.dtd\">" >> "/Library/LaunchDaemons/${APP_PLIST}" echo "" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " " >> "/Library/LaunchDaemons/${APP_PLIST}" echo " Label" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " ${APP_PLIST_BASE}" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " ProgramArguments" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " " >> "/Library/LaunchDaemons/${APP_PLIST}" echo " ${REALDIR}/${APP_NAME}router" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " launchdinternal" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " " >> "/Library/LaunchDaemons/${APP_PLIST}" echo " OnDemand" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " " >> "/Library/LaunchDaemons/${APP_PLIST}" echo " RunAtLoad" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " " >> "/Library/LaunchDaemons/${APP_PLIST}" if [ "X$RUN_AS_USER" != "X" ] ; then echo " UserName" >> "/Library/LaunchDaemons/${APP_PLIST}" echo " ${RUN_AS_USER}" >> "/Library/LaunchDaemons/${APP_PLIST}" fi echo " " >> "/Library/LaunchDaemons/${APP_PLIST}" echo "" >> "/Library/LaunchDaemons/${APP_PLIST}" fi chmod 555 "/Library/LaunchDaemons/${APP_PLIST}" fi elif [ "$DIST_OS" = "zos" ] ; then echo 'Detected z/OS:' if [ -f /etc/rc.bak ] ; then eval echo " `gettext 'The $APP_LONG_NAME daemon is already installed.'`" exit 1 else eval echo " `gettext 'Installing the $APP_LONG_NAME daemon'`.." cp /etc/rc /etc/rc.bak sed "s:echo /etc/rc script executed, \`date\`::g" /etc/rc.bak > /etc/rc echo "_BPX_JOBNAME='${APP_NAME}' \"${REALDIR}/${APP_NAME}router\" start" >>/etc/rc echo '/etc/rc script executed, `date`' >>/etc/rc fi else eval echo `gettext 'Install not currently supported for $DIST_OS'` exit 1 fi fi } removedaemon() { if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then eval echo `gettext 'Must be root to perform this action.'` exit 1 else stopit "0" APP_NAME_LOWER=`echo "$APP_NAME" | $TREXE "[A-Z]" "[a-z]"` if [ "$DIST_OS" = "solaris" ] ; then echo 'Detected Solaris:' if [ -f "/etc/init.d/$APP_NAME" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." for i in "/etc/rc3.d/S20$APP_NAME_LOWER" "/etc/rc3.d/K20$APP_NAME_LOWER" "/etc/init.d/$APP_NAME" do rm -f $i done else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ "$DIST_OS" = "linux" ] ; then if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ] ; then echo 'Detected RHEL or Fedora:' if [ -f "/etc/init.d/$APP_NAME" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." /sbin/chkconfig "$APP_NAME" off /sbin/chkconfig --del "$APP_NAME" rm -f "/etc/init.d/$APP_NAME" elif [ -f "/etc/init/${APP_NAME}.conf" ] ; then echo " Removing $APP_LONG_NAME daemon from upstart..." rm "/etc/init/${APP_NAME}.conf" else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ -f /etc/slackware-version ] ; then echo 'Detected Slackware Linux:' if grep -q ${APP_NAME}router /etc/rc.d/rc.local > /dev/null 2>&1 ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." sed -i "/i2prouter/d" /etc/rc.d/rc.local /etc/rc.d/rc.local_shutdown else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ -f /etc/arch-release ] ; then echo 'Detected Arch Linux:' if [ -f "/etc/rc.d/$APP_NAME" -o -f "$SYSTEMD_SERVICE" ] ; then eval echo "`gettext 'Removing $APP_LONG_NAME daemon'`..." rm -f "/etc/rc.d/$APP_NAME" rm -f "$SYSTEMD_SERVICE" else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ -f /etc/SuSE-release ] ; then echo 'Detected SuSE or SLES:' if [ -f "/etc/init.d/$APP_NAME" -o ${SYSTEMD_SERVICE} ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." insserv -r "/etc/init.d/$APP_NAME" rm -f "/etc/init.d/$APP_NAME" rm -f "$SYSTEMD_SERVICE" else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ -f /etc/lsb-release -o -f /etc/debian_version ] ; then echo 'Detected Debian-based distribution:' if [ -f "/etc/init.d/$APP_NAME" ] ; then echo " Removing $APP_LONG_NAME daemon from init.d..." update-rc.d -f "$APP_NAME" remove rm -f "/etc/init.d/$APP_NAME" elif [ -f "/etc/init/${APP_NAME}.conf" ] ; then echo " Removing $APP_LONG_NAME daemon from upstart..." rm "/etc/init/${APP_NAME}.conf" else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi else echo 'Detected Linux:' if [ -f "/etc/init.d/$APP_NAME" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." for i in "/etc/rc3.d/K20$APP_NAME_LOWER" "/etc/rc5.d/K20$APP_NAME_LOWER" "/etc/rc3.d/S20$APP_NAME_LOWER" "/etc/init.d/$APP_NAME" "/etc/rc5.d/S20$APP_NAME_LOWER" do rm -f $i done else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi fi elif [ "$DIST_OS" = "hpux" ] ; then echo 'Detected HP-UX:' if [ -f "/sbin/init.d/$APP_NAME" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." for i in "/sbin/rc3.d/K20$APP_NAME_LOWER" "/sbin/rc3.d/S20$APP_NAME_LOWER" "/sbin/init.d/$APP_NAME" do rm -f $i done else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ "$DIST_OS" = "aix" ] ; then echo 'Detected AIX:' if [ -f "/etc/rc.d/init.d/$APP_NAME" -o -n "`/usr/sbin/lsitab $APP_NAME`" -o -n "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." if [ -f "/etc/rc.d/init.d/$APP_NAME" ] ; then for i in "/etc/rc.d/rc2.d/S20$APP_NAME_LOWER" "/etc/rc.d/rc2.d/K20$APP_NAME_LOWER" "/etc/rc.d/init.d/$APP_NAME" do rm -f $i done fi if [ -n "`/usr/sbin/lsitab $APP_NAME`" -o -n "`/usr/bin/lssrc -S -s $APP_NAME`" ] ; then /usr/sbin/rmitab $APP_NAME /usr/bin/rmssys -s $APP_NAME fi else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ "$DIST_OS" = "freebsd" ] ; then echo 'Detected FreeBSD:' if [ -f "/etc/rc.d/$APP_NAME" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." for i in "/etc/rc.d/$APP_NAME" do rm -f $i done sed -i .bak "/${APP_NAME}_enable=\"YES\"/d" /etc/rc.conf else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ "$DIST_OS" = "macosx" ] ; then echo 'Detected Mac OSX:' if [ -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." # Make sure the plist is installed LOADED_PLIST=`launchctl list | grep ${APP_PLIST_BASE}` if [ "X${LOADED_PLIST}" != "X" ] ; then launchctl unload "/Library/LaunchDaemons/${APP_PLIST}" fi rm -f "/Library/LaunchDaemons/${APP_PLIST}" else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi elif [ "$DIST_OS" = "zos" ] ; then echo 'Detected z/OS:' if [ -f /etc/rc.bak ] ; then eval echo " `gettext 'Removing $APP_LONG_NAME daemon'`..." cp /etc/rc /etc/rc.bak sed "s/_BPX_JOBNAME=\'APP_NAME\'.*//g" /etc/rc.bak > /etc/rc rm /etc/rc.bak else eval echo " `gettext 'The $APP_LONG_NAME daemon is not currently installed.'`" exit 1 fi else eval echo `gettext 'Remove not currently supported for $DIST_OS'` exit 1 fi fi } dump() { echo "Dumping $APP_LONG_NAME..." getpid if [ "X$pid" = "X" ] then eval echo `gettext '$APP_LONG_NAME was not running.'` else kill -3 $pid if [ $? -ne 0 ] then echo "Failed to dump $APP_LONG_NAME." exit 1 else echo "Dumped $APP_LONG_NAME." fi fi } # Used by HP-UX init scripts. startmsg() { getpid if [ "X$pid" = "X" ] then echo "Starting $APP_LONG_NAME... Wrapper:Stopped" else if [ "X$DETAIL_STATUS" = "X" ] then echo "Starting $APP_LONG_NAME... Wrapper:Running" else getstatus echo "Starting $APP_LONG_NAME... Wrapper:$STATUS, Java:$JAVASTATUS" fi fi } # Used by HP-UX init scripts. stopmsg() { getpid if [ "X$pid" = "X" ] then echo "Stopping $APP_LONG_NAME... Wrapper:Stopped" else if [ "X$DETAIL_STATUS" = "X" ] then echo "Stopping $APP_LONG_NAME... Wrapper:Running" else getstatus echo "Stopping $APP_LONG_NAME... Wrapper:$STATUS, Java:$JAVASTATUS" fi fi } showUsage() { # $1 bad command if [ -n "$1" ] then echo "Unexpected command: $1" echo ""; fi MSG='Usage: ' if [ -n "$FIXED_COMMAND" ] ; then if [ -n "$PASS_THROUGH" ] ; then echo "${MSG} $0 {JavaAppArgs}" else echo "${MSG} $0" fi else if [ -n "$PASS_THROUGH" ] ; then echo "${MSG} $0 [ console {JavaAppArgs} | start {JavaAppArgs} | stop | restart {JavaAppArgs} | condrestart {JavaAppArgs} | status | install | remove | dump ]" else echo "${MSG} $0 [ console | start | stop | graceful | restart | condrestart | status | install | remove | dump ]" fi fi if [ ! -n "$BRIEF_USAGE" ] then echo ""; if [ ! -n "$FIXED_COMMAND" ] ; then echo "`gettext 'Commands:'`" echo " console `gettext 'Launch in the current console.'`" echo " start `gettext 'Start in the background as a daemon process.'`" echo " stop `gettext 'Stop if running as a daemon or in another console.'`" echo " graceful `gettext 'Stop gracefully, may take up to 11 minutes.'`" echo " restart `gettext 'Stop if running and then start.'`" echo " condrestart `gettext 'Restart only if already running.'`" echo " status `gettext 'Query the current status.'`" echo " install `gettext 'Install to start automatically when system boots.'`" echo " remove `gettext 'Uninstall.'`" echo " dump `gettext 'Request a Java thread dump if running.'`" echo ""; fi if [ -n "$PASS_THROUGH" ] ; then echo "JavaAppArgs: Zero or more arguments which will be passed to the Java application." echo ""; fi fi exit 1 } showsetusermesg() { echo "`gettext 'Please edit i2prouter and set the variable RUN_AS_USER'`." } checkifstartingasroot() { if [ ! `grep ^RUN_AS_USER $0` ] && [ ! `grep ^ALLOW_ROOT $0` ] && [ `id -ur` = '0' ]; then echo "`gettext 'Running I2P as the root user is *not* recommended.'`" showsetusermesg echo echo "`gettext 'To run as root anyway, edit i2prouter and set ALLOW_ROOT=true.'`" exit 1 fi } docommand() { case "$COMMAND" in 'console') checkifstartingasroot checkUser touchlock "$@" if [ ! -n "$FIXED_COMMAND" ] ; then shift fi console "$@" ;; 'start') checkifstartingasroot if [ "$DIST_OS" = "macosx" -a -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then macosxstart elif [ "$DIST_OS" = "linux" -a -f "/etc/init/${APP_NAME}.conf" ] ; then checkUser touchlock "$@" upstartstart else checkUser touchlock "$@" if [ ! -n "$FIXED_COMMAND" ] ; then shift fi start "$@" fi ;; 'stop') checkUser "" "$COMMAND" stopit "0" ;; 'graceful') checkUser "" "$COMMAND" graceful "0" ;; 'restart') checkUser touchlock "$COMMAND" if [ ! -n "$FIXED_COMMAND" ] ; then shift fi stopit "0" start "$@" ;; 'condrestart') checkUser touchlock "$COMMAND" if [ ! -n "$FIXED_COMMAND" ] ; then shift fi stopit "1" start "$@" ;; 'status') checkUser "" "$COMMAND" status ;; 'install') installdaemon if [ ! `grep ^RUN_AS_USER $0` ]; then echo showsetusermesg fi echo echo "You may want to disable the browser from launching at startup at" echo "http://127.0.0.1:7657/configclients" echo echo "I2P_CONFIG_DIR is currently set to $I2P_CONFIG_DIR." echo "Change the value in $0 if this is not" echo "appropriate for your configuration." ;; 'remove' | 'uninstall') removedaemon ;; 'dump') checkUser "" "$COMMAND" dump ;; 'start_msg') # Internal command called by launchd on HP-UX. checkUser "" "$COMMAND" startmsg ;; 'stop_msg') # Internal command called by launchd on HP-UX. checkUser "" "$COMMAND" stopmsg ;; 'launchdinternal') # Internal command called by launchd on Max OSX. # We do not want to call checkUser here as it is handled in the launchd plist file. Doing it here would confuse launchd. if [ ! -n "$FIXED_COMMAND" ] ; then shift fi launchdinternal "$@" ;; *) showUsage "$COMMAND" ;; esac } docommand "$@" exit 0